Instruction/ maintenance manual of the product TS12 Tannoy
Go to page of 12
the evolution revealed.
TS12 500W RMS 26Hz(-6dB) 15Hz 2 x line level phone 2 x XLR balanced 2 x XLR balanced (direct or 80Hz high pass) 2nd order low pass, 50Hz - 150Hz, -6dB After approximately 12 mins.
& & PERFORMANCE TS8 TS10 Output power 200W RMS 300W RMS Low frequency response 32Hz(-6dB) 29Hz(-6dB) Limit for usable output 18Hz 16Hz Inputs 2 x line level phone 2 x line level phone 2 x XLR .
Reveal 66 Passive centre channel reference monitor Optimised bass-reflex loaded cabinet with 40mm thick front baffle Two shielded 165mm (6 1 / 2 ”) woofers, multi fibre paper pulp cones Shielded 25mm (1”) titanium dome neodymium tweeter WideBand™ HF extended to 51kHz corrects phase response Whether you’re mixing for film, video or 5.
Reveal 6 Passive nearfield reference monitor Optimised bass-reflex loaded cabinet with 40mm thick front baffle Shielded 165mm (6 1 / 2 ”) woofer, multi fibre paper pulp cone Shielded 25mm (1”) tit.
Just because a speaker sounds great in one room doesn’t mean it will sound great in your studio. Room acoustics, speaker placement and monitoring distance play a great role in the way a speaker sounds.
Applications: Home studios/composition Project studios, users of PC/MAC DAW’s Professional recording, broadcast, post production studios & editing suites DIP switch ‘flat’ setting shown on t.
PERFORMANCE 66D Frequency response (1) 49Hz-51kHZ Max SPL (2) 1 17dB Distortion <0.4% Dispersion @-6dB, 10kHz, horizontal 90 degrees DRIVE UNITS Drive Units – LF/MID 2 x 165mm (6 1 / 2 ”) multi fibre paper pulp cone WideBand TM HF 25mm (1”) titanium dome, neodymium magnet system.
PERFORMANCE 8D Frequency response (1) 46Hz-51kHz Max SPL (2) 1 18dB Distortion <0.4% Dispersion @-6dB, 10kHz, horizontal 90 degrees DRIVE UNITS Drive Units – LF/MID 200mm (8”) multi fibre paper pulp cone WideBand TM HF 25mm (1”) titanium dome, neodymium magnet system.
Features: 40mm thick contoured baffle Driver lossy-coupled to cabinet 10 screw driver chassis fixing Flux control rings on LF drivers Applications: Home studios/composition Project studios, users of P.
Features: 40mm thick contoured baffle Driver lossy-coupled to cabinet 10 screw driver chassis fixing Flux control rings on LF drivers Applications: Home studios/composition Project studios, users of P.
The Antidote to Compromise Few if any manufacturers have the reputation and track record of Tannoy in the professional studio monitor market. Right from the emergence of the studio monitor itself as a.
An important point after buying a device Tannoy TS12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy TS12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy TS12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy TS12 you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy TS12 will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy TS12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy TS12.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy TS12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy TS12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
