Instruction/ maintenance manual of the product SFX 5.1 Tannoy
Go to page of 8
The setup guide SFX 5.1 Manual AW.qxd:Layout 1 17/3/11 13:00 Page 1.
Thank you for purchasing this high performance 5.1 home theatre system. The SFX5.1 has been built and tested with care and precision, to provide first class performance and reliable operation. T o ensure maximum benefit from ownership and for reasons of safety , please read the following information before using for the first time.
W arning: T o reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on the apparatus. T o completely isolate this apparatus from the mains, disconnect the power supply plug from the receptacle.
W arning: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. W arning: T o reduce the risk of fire or electric shock, do not expose this apparatus to rain, liquids, moisture, excessive heat, or naked flame.
5.1 system setup guide _ + _ + _ + _ + _ + _ + This high performance 5.1 system has been built and tested with care and precision, to provide first class performance and reliable operation. T o ensure maximum benefit from ownership, and for reasons of safety , please read the following information before using for the first time.
The SFX5.1 system subwoofer may be connected in any one of the following ways: Line levels • Using the subwoofer output on your A/V receiver or decoder connect a single RCA interconnect to either the left or right line input on the subwoofer rear panel.
Setting up Ensure the POWER switch is in the OFF position. Y ou can operate the SFX subwoofer in two modes, AUTO and ON. Set to AUTO, the unit remains switched off until a signal is present (power saving), set to ON the unit runs continuously . Connect the SFX subwoofer to a con- venient mains socket using the lead and plug supplied.
Centre & Satellites PERFORMANCE Recommended amplifier power Maximum Sensitivity (2.83V olts @ 1m) Nominal impedance Frequency response (-6dB) Drivers Crossover frequency Magnetic shielding Satelli.
An important point after buying a device Tannoy SFX 5.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy SFX 5.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy SFX 5.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy SFX 5.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy SFX 5.1 will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy SFX 5.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy SFX 5.1.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy SFX 5.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy SFX 5.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
