Instruction/ maintenance manual of the product DC10A Tannoy
Go to page of 12
DEFINITION DC10A OWNER’S MANUAL_01 OWNER’S MANUAL.
02_ DEFINITION DC10A OWNER’S MANUAL CONTENTS WARRANTY 02 CONNECTION IN SINGLE WIRE MODE 05 INTRODUCTION 03 CONNECTION IN BI-WIRE MODE 06 WARNING, STRONG MAGNETIC FIELDS 03 BI-AMPING 06 TECHNOLOGY 03.
DEFINITION DC10A OWNER’S MANUAL_03 INTRODUCTION Thank you for selecting a T annoy loudspeaker developed in the UK by our dedicated team of design engineers. They are the choice of discriminating music lovers the world over . Musical excellence is designed into our loudspeakers from the start.
04_ DEFINITION DC10A OWNER’S MANUAL AMPLIFIER CHOICE Consult the product specication as this clearly shows the acceptable power range for amplier matching to your speakers. The high peak power handling of T annoy loudspeakers permits responsible use with more powerful ampliers - please r ead the W arranty .
DEFINITION DC10A OWNER’S MANUAL_05 MASS LOADING These loudspeakers are designed to be mass loaded, if wished, to lower the centr e of gravity and improve stability , resulting in impr oved sound quality . T o do so, remove the 4 scr ews securing the access plate to the bottom of the loudspeaker .
06_ DEFINITION DC10A OWNER’S MANUAL CONNECTION IN BI-WIRE MODE Please note in Bi-wire mode that the link cables should not be used. (See g. 4) • If not using specially designed bi-wire cable, pr epare the two sets of cabling for each ‘side’ of the system separately .
DEFINITION DC10A OWNER’S MANUAL_07 PORT BUNGS The Denition DC10A is designed to be operated normally without the foam port bungs in place. However if excessive or poorly controlled bass output r .
08_ DEFINITION DC10A OWNER’S MANUAL TECHNICAL SPECIFICA TIONS DC10A PERFORMANCE Recommended amplier power 30 – 300 (W atts RMS) Continuous power handling 150 (W atts RMS) Peak power handling (W atts) 600 Sensitivity (2.
DEFINITION DC10A OWNER’S MANUAL_09 SETUP DIAGRAMS Fig.1 Unpacking Fig.2 Mass Loading, Fitting of Plinth & Spikes.
010_ DEFINITION DC10A OWNER’S MANUAL Fig.3 Single Wire Mode Fig.4 Bi-Wire Mode POWER AMPLIFIER SPEAKER - + - L R + TO RIGHT LINKS IN PLACE 'EARTH' CONNECTION ON AMPLIFIER (OPTIONAL) TO &ap.
DEFINITION DC10A OWNER’S MANUAL_01 1 Fig.5 Bi-Amp Mode Fig.6 Recommended Positioning 0.5 METRES OR MORE 1.5 TO 4.5 METRES 1 METRE OR MORE LINKS REMOVED SPEAKER TO RIGHT TO RIGHT SPEAKER LOW FREQUENC.
012_ DEFINITION DC10A OWNER’S MANUAL 6481 0617 / 0812 T annoy Limited - product designed and engineered in the United Kingdom. T annoy adopts a policy of continuous improvement and product specication is subject to change. Dual Concentric, Differential Materials T echnology, WideBand, Tulip W aveGuide, are trademarks of T annoy Limited.
An important point after buying a device Tannoy DC10A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy DC10A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy DC10A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy DC10A you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy DC10A will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy DC10A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy DC10A.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy DC10A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy DC10A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
