Instruction/ maintenance manual of the product 600A Tannoy
Go to page of 12
System 600a USER MANUAL.
Contents INTRODUCTION 1 OPER ATING INSTRUCTIONS 1 Unpacking and visual checks 1 Preliminary recommendation 1 Installing and connecting the system 2 Controls and indicators 3 Use close to TV screens and video monitors 3 SYSTEM DESCRIPTION AND PHILOSOPHY 4 Drive unit.
INTRODUCTION Thank you for purchasing the Tannoy System 600A Active Monitor. The System 600A is a very compact, active near-field reference monitor. Using an advanced Dual Concentric 6.
the monitors should be mounted on a rigid structure, preferably with the use of soft pads (rubber, Sorbothane, Blu-Tak etc ..). When used in the landscape orientation, we recommend location of the monitors so that the drive units are toed inwards, with their axes oriented towards the listening position.
If the source itself has a balanced output, use shielded twin conductor cable (microphone cable) connecting pin 2/T to pin 2/T, pin 3/R to pin 3/R, and pin 1/S to pin 1/S (using the shield).
SYSTEM DESCRIPTION AND PHILOSOPHY A loudspeaker design naturally splits into various parts: cabinet, lower frequency, higher frequency, and crossover which, for the System 600A, is integrated in the amplifier assembly. The design of these parts cannot take place in isolation, as they are all interdependent.
attention paid regarding the sculptured front panel to provide smooth, rounded edges which minimise side diffractions. Another problem involved in cabinet design is to ensure that the box will effectively behave as neutrally as possible, ideally without interfering at all with the sound field emitted by the drive unit and the port.
SERVICING Cabinet finish. To remove marks and scuffs, use a medium soft brush. If necessary, a little warm water and detergent can be used, but under no circumstances use a solvent or abrasive cleaner. The surface will change colour when wet but will return to normal when dry.
Amplifier. A fuse is located just under the mains input (location 3 in figure 1). Replacement is simple and a spare fuse is provided inside the fuse housing itself. Always use the correctly rated fuse, as indicated on the silk screen printing, there are two different types according to the operating voltage.
CURVES Figure 3 . System 600A. Anechoic response. LF contour ON & OFF Figure 4 . System 600A. Effect of HF contour on anechoic response..
TECHNICAL SPECIFICATIONS System Frequency response ( ± 3 dB) Free space 44 Hz - 20 kHz Maximum SPL (peak @ 1 m) 107 dB SPL Maximum SPL at mix position (one pair driven) 117 dB SPL Distortion < 0.
Declaration of Conformity Position: Technical Manager Tannoy Professional Date: 16 th July 1998 For Tannoy Ltd The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Roseha.
An important point after buying a device Tannoy 600A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy 600A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy 600A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy 600A you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy 600A will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy 600A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy 600A.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy 600A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy 600A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center