Instruction/ maintenance manual of the product 2U LTO Tandberg Data
Go to page of 8
StorageLoader 2U L TO Quick Start Guide Accessories — These accessories are included with your library * L VD SCSI conguration only . Important: Both L TO-2 and L T O-3 tape drives require Ultra 160 rated SCSI cabling, and an Ultra 3 or L VD 160 Active SCSI terminator .
StorageLoader 2U L TO Quick Start Guide Step 1 — Before you begin 1 — Ensure that you have all the required items before you proceed (see Accessories and Additional Items on page 1).
StorageLoader 2U L TO Quick Start Guide Page 3 of 8 Step 4 — Powering on and Removing the Shipping Lock Shipping Lock 1 — Power on the library by pressing the power switch on the back of the unit (press the I ). When you apply power with the shipping lock installed, the library displays a message and ejects both left magazines.
StorageLoader 2U L TO Quick Start Guide Page 4 of 8 Step 4 continued — Powering on and Removing the Shipping Lock TOP VIEWS FOR REFERENCE ONL Y Important: Some views show the library with the top co.
StorageLoader 2U L TO Quick Start Guide Page 5 of 8 Step 5 — Adding bar code labels and loading cartridges 1 — Apply bar code labels to cartridges. 2 — Press the eject button to unlock the magazine (magazine releases and moves a short distance out of the library).
StorageLoader 2U L TO Quick Start Guide Left Magazine Eject Right Magazine Eject I/E Port Release I/E Port Home Screen Home Screen Menu and Buttons Page 6 of 8 Home Screen Buttons Function OK Accept t.
StorageLoader 2U L TO Quick Start Guide Page 7 of 8 T roubleshooting T ips If the library did not power on as described • Is the power cord inserted correctly and is the power switch on (press the I.
StorageLoader 2U L TO Quick Start Guide Page 8 of 8 IMPORT ANT! Before moving or shipping the library , you must rst “Park the Robot” and replace the shipping key or you will void your warranty . • From the library’s front panel, press the Maint / Library Maintenance / Park the Robot buttons.
An important point after buying a device Tandberg Data 2U LTO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tandberg Data 2U LTO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tandberg Data 2U LTO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tandberg Data 2U LTO you will learn all the available features of the product, as well as information on its operation. The information that you get Tandberg Data 2U LTO will certainly help you make a decision on the purchase.
If you already are a holder of Tandberg Data 2U LTO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tandberg Data 2U LTO.
However, one of the most important roles played by the user manual is to help in solving problems with Tandberg Data 2U LTO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tandberg Data 2U LTO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
