Instruction/ maintenance manual of the product TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN Tanaka
Go to page of 17
Owner ’ s Manual Model Numbers: TPS-2501,TPS-2510 TPS-250PF/PN,TPS-270PF/PN POLESAWS P/N 28576 Date 03-08-02 Supplier T o The Outdoor Power Equipment Industry ISM, Inc. • 1028 4 th S treet SW • Auburn, W A 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212 ww w.
www.tanaka-usa.com 1 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Before using this unit: • Read the operator’s manual carefully. • Check that the cutt ing equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment.
www.tanaka-usa.com 2 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN.
www.tanaka-usa.com 3 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN 2. Warnings and safety instructions Operator Safety • Always wear head protection with ful l face shield to help protect against falling branches and debris.
www.tanaka-usa.com 4 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN 3. Assembly procedures Drive shaft to engine (Fig. 1 -1) Loosen tube locking bolt (1) about ten turns so that the bolt point will not obstruct drive shaft tube to be i nserted.
www.tanaka-usa.com 5 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN WARNING! Never try to start engine without side case securely fastened. NOTE! When assembling brand new unit , take off and discar d the cardboard (1) between gear case and side case.
www.tanaka-usa.com 6 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN 4. Operating procedures Fuel (Fig. 2-1) WARNING! The chainsaw is equipped with a two- st roke engine. Always run the engine on fuel, which is m ixed with oil.
www.tanaka-usa.com 7 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN ADJUSTMENT OF CHAIN OIL SUPPLY The chain oil quantity discharged through the lubricatio n s ystem is factory-adjusted to the maximum. Adjust the quantity in accordan ce wi th the operating condition.
www.tanaka-usa.com 8 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Starting (Fig. 2-5) CAUTION! Before starting, ma ke su re the cutting attachment does not touch anything. 1 . Set ignition switch ( 1) to ON position. (Fig.
www.tanaka-usa.com 9 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN SAFE OPERATION • Review the area to be trimmed. Look for hazard s that could contribute to unsafe conditions. DO NOT operate unit if any wires(power, teleph one, cable, etc.
www.tanaka-usa.com 10 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN 5. Maintenance MAINTENANCE, REPLA CEMENT, OR REPAIR OF THE EMISSION CONTROL D EVICES AND SYSTEMS MAY BE PERFORMED BY ANY N ONROAD ENGINE REPAIR ESTABLISHMENT OR INDIVIDUAL.
www.tanaka-usa.com 11 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Spark plug (Fig. 3-3) The spark plug condition is influenced by: • An incorrect carburetor setting. • Wrong fuel mixture (too much oil in the gasoline) • A dirty air filter.
www.tanaka-usa.com 12 custsvc@tana ka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Side case (Fig. 5-3) Always keep the side ca se and drive area clean of saw dust and debris. Periodically apply oil or grease to this area to protect from corro sion as some trees contain high levels of acid.
www.tanaka-usa.com 13 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN LOWERING DEPTH GAUGES WITH A FILE 1) If you sharpen your cutters with a file holder, check and lower the depth. 2) Check depth gauges every third sharpening.
www.tanaka-usa.com 14 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Maintenance schedule Below you will find some genera l maintenance instructions. For further information please contact your service dealer. Daily maintenance • Clean the exterior of the unit.
www.tanaka-usa.com 15 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Note: Sound level are calculated as the time-weighted energy total under various working conditions with the following time distribution: ½ idling, ½ racing.
www.tanaka-usa.com 16 custsvc@tanaka-ism.com Owner’s Manual TPS-2501,TPS-2510.TPS-250PN,TPS-270PN Declaration of conformity Tanaka Kogyo Co., Ltd., 3-4-29 Tsudanuma, Naras hino, Chiba, Japan TPS-250.
An important point after buying a device Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN you will learn all the available features of the product, as well as information on its operation. The information that you get Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN will certainly help you make a decision on the purchase.
If you already are a holder of Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN.
However, one of the most important roles played by the user manual is to help in solving problems with Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tanaka TPS2501, TPS-2510, TPS250PF/PN, TPS-270PF/PN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
