Instruction/ maintenance manual of the product TED-262DH Tanaka
Go to page of 14
Owner’ Owner’ Owner’ Owner’ Owner’ s Man s Man s Man s Man s Man ual ual ual ual ual Model Numbers: TED-210, TED-262DH TED-210, TED-262DH TED-210, TED-262DH TED-210, TED-262DH TED-210, TED-2.
www.tanaka-usa.com 1 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Before using this unit: • Read the operator’s manual carefully. • Check that the cutt ing equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment.
www.tanaka-usa.com 2 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS 1. What is What? Since this manual coves several models, there ma y b e some difference between pictures and your unit. Use the instructions that apply to your unit.
www.tanaka-usa.com 3 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS 2. Warnings and safety instruc tions Operator safety • Always wear a safety fac e shield or goggles. • Always wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, s h ort pants, sandals or go barefoot.
www.tanaka-usa.com 4 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Assembly procedures Assembling (Fig. 1-1, 1B, 1C) 1. Assemble the handle (1), which is su pplied with the unit to the gear case. 2. Screw the chuck unit (2) into the drive shaft (clockwise) after the collar B (3) has been installed.
www.tanaka-usa.com 5 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Starting 1. Set ignition switch (1) to (RUN) position. (Fi g. 2-2, 2B) *Push priming bulb (4) several ti mes so that fuel flows through the bulb or return pipe ( 5).
www.tanaka-usa.com 6 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Drilling (Fig. 2-5,5B) • Always hold unit firmly with both ha nds on handles and body well bal anced. • Operate at a high engine speed and let the drill bi t do the work.
www.tanaka-usa.com 7 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS • To tighten the chuck more securely, set a 19mm spanner (1) between gear case and drill chuck to lock drive shaft. Turn on lock lever (2 ) first, then hit the m ounted chuck handle with a hammer to screw in (clockwise) the chuck.
www.tanaka-usa.com 8 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Maintenance MAINTENANCE, REPLA CEMENT, OR REPAIR OF THE EMISSION CONTROL D EVICES AND SYSTEMS MA Y BE PERFORMED BY ANY NON ROAD ENGINE RE PAIR ESTABLISH MENT OR INDIVIDUAL .
www.tanaka-usa.com 9 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Air filter (Fig. 3-2, 2B) The air filter must be cleaned f rom dust and dirt in order to avoid: • Carburetor malfunctions. • Starting problems. • Engine power reduction.
www.tanaka-usa.com 10 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Cleaning the cylinder fins (Fig. 3-6) When wood chips are caught between cylinder fins (1 ), the engine may overheat, resulting in lower output. To avoid this, always keep cylinder fins and fan case clean.
www.tanaka-usa.com 11 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Maintenance schedule Below you will find some general main tenance instructions. For further in formation, please contact your servicing dealer. Daily maintenance • Clean the exterior of th e unit.
www.tanaka-usa.com 12 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Specifications NOTE! Equivalent noise level/vibration level are calculated as the time-weighted en ergy t otal for noise/vibration levels under various working conditions with the followin g time distribution : ½ idle, ½ full speed.
www.tanaka-usa.com 13 contacttanaka@tanaka-ism.com Owner’s Manual TED-210/TED-262L/R/DH/HS Declaration of conformity Déclaration de conformité Dichiarazione di conform itá Konformitätser klärung Declaración de confor midad Konformitetsd eklaration We, Tanaka Kogyo Co.
An important point after buying a device Tanaka TED-262DH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tanaka TED-262DH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tanaka TED-262DH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tanaka TED-262DH you will learn all the available features of the product, as well as information on its operation. The information that you get Tanaka TED-262DH will certainly help you make a decision on the purchase.
If you already are a holder of Tanaka TED-262DH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tanaka TED-262DH.
However, one of the most important roles played by the user manual is to help in solving problems with Tanaka TED-262DH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tanaka TED-262DH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
