Instruction/ maintenance manual of the product mL450 Tally Genicom
Go to page of 232
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual.
Pub lica tio n No. GEG- 991 97 May 04 ii T allyGenicom mL450 Laser Printer User Ma nual T rademark s The fol lowin g are tradema rks or r egist ered tradem arks of their r espec tive o wners . Other prod uct na mes mentioned in this manual may al so be trademarks or r egistere d trademarks of their r espective owners.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual iii Chapter 1 Unpackin g and Installing Y our Printer How Th is Ma nual is O r ganiz ed This manual consists o f 7 cha.
Pub lica tion No. GEG- 99197 May 04 iv T allyGenicom mL450 Laser Printer User Ma nual How This Manual is Or ganized Appendix D Fr equently Used E thernet Commands This appendix lists some of the most frequently -used commands of the Print Ser ver command set.
May 04 Publicati on No. G EG-9919 7 Contents Pr eface We l c o m e -2 Features -2 Standar d Configurations -3 Base Configuration (for table-top use) -3 Extended Configuration (fl o or-standing) -4 Man.
Pub lica tion No. GEG- 99197 May 04 vi T allyGenicom mL450 Laser Printer User Manual Adding paper to the 500-sheet universal paper cas sette 1-10 Connecting th e Parallel C able 1-14 Connecting th e E.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual vii Media Si zes Suppor ted 3-4 Media T yp es suppo r ted 3-5 Pape r Orien tatio n 3-6 Paper Orientation in T ray s 1,.
Pub lica tion No. GEG- 99197 May 04 viii T allyGenicom mL450 Laser Printer Us er Manual Navigati ng the C ontr o l Panel Menus 4-4 Menu Structur e 4-6 Job Library 4-7 Job Accounting 4-8 Pape r Menu 4-.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual ix Daily Ma intenance 5-28 Preparing the Pri nter for a Perio d of Exte nded No n-Use 5-28 Relocating the Printer 5-30.
Pub lica tion No. GEG- 99197 May 04 x T allyGenicom mL450 Laser Printer User Manual Installing DRAM Memory DIMMS 7-2 Instal ling a FLASH DIM M Modu le 7-5 Using the Har d Di sk Option and User Flash D.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual xi Interpreter 7-41 Format 7-41 Serial Mode 7-41 Baud Rate 7-41 Data Bits 7-41 Stop Bits 7-41 Parity 7-41 DTR Read y/B.
Pub lica tion No. GEG- 99197 May 04 xii T allyGenicom m L450 Laser Printer U ser Manual Locatio n and E nvironment P r ecauti ons B-3 Fire, Smo ke and S hock Precaution s B-4 Paper Jam Pr ecautions B-.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual xiii User Publications E-6 Consumables E-6.
Pub lica tion No. GEG- 99197 May 04 xiv T allyGenicom m L450 Laser Printer U ser Manual.
May 04 Publicati on No. G EG-9919 7 Pr eface In this Chapter . . . “W elcome” on page 2 “F e atures” on p ag e 2 “Standard Conf igurations” on page 3 “Manu al Co nvention.
Pub lica tion No. GEG- 99197 May 04 2 T allyGenicom mL450 Laser Printer User Ma nual Features W elcome Thank you for selecting t he 45 PPM Las er Pri nter . In this ma nual y ou will find important infor ma- tion regarding operatio n and care of your printer .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3 Base Co nfiguration ( for table-top use) Stand ard Configuratio ns The 45 PPM L aser Printer can be ordered in the f.
Pub lica tion No. GEG- 99197 May 04 4 T allyGenicom mL450 Laser Printer User Ma nual Standard Configurations Extended Confi guration (floor-sta nding) Memor y: 64 Mbytes RAM Memor y Resolution.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5 Extended Configurat ion (floor -standing) Manu al Conv en tion s NOTE: Notes contain tips, extra inform ation, or important informat ion that deserves emphasis or rei t e r at i o n .
Pub lica tion No. GEG- 99197 May 04 6 T allyGenicom mL450 Laser Printer User Ma nual Manual Conven tions.
May 04 Publicati on No. G EG-9919 7 Chapter 1 Unpacking and In stalling Y our Printer In this Chapter . . . “ About this Chapter ” on pag e 1-2 “Installa tion Precauti ons” on page 1-2.
Pub lica tion No. GEG- 99197 May 04 1-2 T allyGenicom mL450 Laser Print er User Manual Installation Pr ecautions About this Chapter Describes a suitable location for your laser printer and how to unp a c k and install it. Be s ure to read this c hapter before setting up the prin ter .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-3 Space requir ements T op View of Printer (standar d configuration) Measurements in inches (mm) T op View of Printer (wh en options are installed) Measurements in inches (mm) 14.
Pub lica tion No. GEG- 99197 May 04 1-4 T allyGenicom mL450 Laser Print er User Manual Unpacking the Printer Unpacking the Printer 1. Cut the shipp ing straps off the exterior car ton. 2. Re mov e the four plastic inserts at the base of the ship ping container by pu lling on the tabs of eac h insert.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-5 Space requir ements 5. Re fer to the cautions below on how to car r y the printer . T hen, with the assistance of another person, lif t up the printer and p lace it on t he floor .
Pub lica tion No. GEG- 99197 May 04 1-6 T allyGenicom mL450 Laser Print er User Manual Installing the EP Cartrid ge When you unpack the printer , make sure that all the items shown below are included. If any items are mis sing or da maged, contact y our point of p urch ase.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-7 For standard configu ration T oner is not har mful to th e human b ody , but if so me toner has come into contact with y our skin, y ou can wash it off with w ar m water a nd soap .
Pub lica tion No. GEG- 99197 May 04 1-8 T allyGenicom mL450 Laser Print er User Manual Installing the EP Cartrid ge properly freed by shaking the car tridge, a noise may be heard when turning on the printer and the EP car tridge may be damag ed. 4. Open the front cover as indicated.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-9 For standard configu ration 5. While holding the orange handle with one hand, gently push the cartridg e all the way into the prin ter. I 1. Gently pull out the sealing tape in t he direction of the arrow .
Pub lica tion No. GEG- 99197 May 04 1-10 T allyGenicom mL450 Laser Printer Us er Manual Adding pa per to the 500-she et univer sal paper cassette 2. Close the front cove r and the upper left cover . NOTE: When closing th e upper lef t cover , do not use t he latch on th e cover .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-11 For standard configu ration 2. Pre pare a stack of pape r . Make su re th e to ps of th e she ets are pr oper ly ali gned . NOTE: Do not use paper with creases or wrinkles.
Pub lica tion No. GEG- 99197 May 04 1-12 T allyGenicom mL450 Laser Printer Us er Manual Adding pa per to the 500-she et univer sal paper cassette 4. While pressing down the gray handle, slide th e side guide all the w ay until it s tops . 5. Align the four cor ners of the paper an d place the paper in the ca ssette.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-13 For standard configu ration 6. Adjust the s ide guide to the pap er width. NOTE: Adjust the gui de to the paper size corr ectly; otherwi se pape r may not b e transp or ted corr ectly and may resu lt in a pape r jam.
Pub lica tion No. GEG- 99197 May 04 1-14 T allyGenicom mL450 Laser Printer Us er Manual Connecting th e Parallel Cable 8. Adjust the length guide to the paper length. NOTE: Ma ke sure the guide st opper is locked firmly in the guide hole on the bott om of the cass ette.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-15 For standard configu ration Connecting the Ethernet Cable 1. Attac h appropriate cable to your Ethernet hub . 2. Attac h the opposite end of the cable to the et her net port on the pr inter .
Pub lica tion No. GEG- 99197 May 04 1-16 T allyGenicom mL450 Laser Printer Us er Manual Connecting the Power Cor d 2. V erify that the power switc h of the printer is set to the [ O ] (of f) po siti on then inse rt the plug of the po wer cord into the A C outlet.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-17 For standard configu ration T urni ng the Printer On Set the po wer switch to the [I] po sition to turn on the prin ter.
Pub lica tion No. GEG- 99197 May 04 1-18 T allyGenicom mL450 Laser Printer Us er Manual Installin g Printer Drivers 1. From the R eady status, pr ess MENU , the control panel display will read: Menu Paper 2. Press PR EVIOUS or N EXT until the dis play reads: Menu System Menu 3.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-19 Installing Printer Driv ers for MacOS The UnixSW folder c ontains UNIX Printing Soft w are , which is an enha nced print filter and networ k so cket dr iver th at a llows yo u to take a d vanta ge of all of the printi ng features of y our printer .
Pub lica tion No. GEG- 99197 May 04 1-20 T allyGenicom mL450 Laser Printer Us er Manual Printing a Configuration Summary.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-21 Installing Printer Driv ers for MacOS Printing a T est Page Y our printer can p r int a test page that li sts the indicates, grey scale, resolu tion sett ings , pag e counter , and other relev ant infor mation about y our printer .
Pub lica tion No. GEG- 99197 May 04 1-22 T allyGenicom mL450 Laser Printer Us er Manual Printing PCL and PostScript Font Lists Printing PCL a nd PostScript Font Lists Y our printer has the capa bility of printing lists of all installed PCL or P ostScript fonts .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 1-23 Installing Printer Driv ers for MacOS 3. Press SELECT , the display will read: Functions Reset Printer 4. Press NEX T or PREVIOU S until the display reads: Functions Print Fonts 5.
Pub lica tion No. GEG- 99197 May 04 1-24 T allyGenicom mL450 Laser Printer Us er Manual T urni ng the Printer Of f.
May 04 Publicati on No. G EG-9919 7 Chapter 2 Printer and Options Par ts and Functions In this Chapter . . . “ About this Chapter ” on pag e 2-2 “Main Unit” on page 2-2 “Options.
Pub lica tion No. GEG- 99197 May 04 2-2 T allyGen icom mL450 Laser Printer User Manual Main Unit About this Chapter Describe s the parts of t he printer and pap er handling op tions and their fun ctions . A discussion of the paper path is also includ ed.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 2-3 Rear Vie w NOTE: The upper left cover can be closed only when t he E P cartridge is installed in the printer . Do not close it when the EP car tridge is not ins ide the printer .
Pub lica tion No. GEG- 99197 May 04 2-4 T allyGen icom mL450 Laser Printer User Manual Main Unit Operation Panel Display Sho ws error mess ag es an d other status infor mation .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 2-5 Inside the P r inter Inside the Pr inter 5 LED ON - Indicates Ethernet connection is active. 6 RJ45 Etherne t Port 1 Fuser Fixes toner onto the paper 2 EP Cartrid ge The integrated car tridge contains the toner and the photosensitive drum.
Pub lica tion No. GEG- 99197 May 04 2-6 T allyGen icom mL450 Laser Printer User Manual Options Options The above illustr ation show th e printer with the standard cassette feeders , duplexer , and face-up tray installed. 1 Duplexer For printing on both sides of a sheet.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 2-7 Inside the P r inter The above illustr ation sho ws the print er with the env elope feeder installed. The above illustr ation sho ws the print er with the Finisher/Stapler unit installed.
Pub lica tion No. GEG- 99197 May 04 2-8 T allyGen icom mL450 Laser Printer User Manual Options NOTE: Additional options such as network interfaces, m emory DIMMs, consumables and user publications are availab le for your print er .
May 04 Publicati on No. G EG-9919 7 Chapter 3 Understand ing Paper , Paper Paths, Paper Delivery and Paper Loadi ng In this Chapter . . . “ About this Chapter ” on pag e 3-2 “P aper” o.
Pub lica tion No. GEG- 99197 May 04 3-2 T allyGenicom mL450 Laser Printer User Ma nual Paper About this Chapter Pro vides information on paper qualities , paper size requirements , paper paths , paper out put deliv- ery and loading of paper in yo ur printer a nd options .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-3 Main unit Main unit High Capacit y Feeder Option (T ray s 3, 4, and 5) Paper Source Paper Size Simplex Printing Duplex Printing X (mm) Y(mm) Tr a y 1 Tr a y 2 A4 LEF 210 297 Y es Y es B4 SEF 364 257 Y es Y es 8.
Pub lica tion No. GEG- 99197 May 04 3-4 T allyGenicom mL450 Laser Printer User Ma nual Media Sizes Supporte d NOTE: 1. Differ ent size p apers c annot b e mixe d and loaded into the same pa per sour ce. 2. Duplex printing is possible only wh en the option al duplexer is installed.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-5 High C apacity Fee der Op tion (T ray s 3, 4, and 5) Media T yp es suppor ted NOTE: In the follo wing table s, SEF refers t o Shor t Edge Feed whereas LEF refers to Long E dge Feed.
Pub lica tion No. GEG- 99197 May 04 3-6 T allyGenicom mL450 Laser Printer User Ma nual Paper Orientation Paper Orienta tion Paper Orien tatio n in T ray s 1, 2, o r 3 Paper Orientat ion in T ray 4 T o.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-7 Pap er Or ientat ion i n T ray 5 Paper Orientat ion in T ray 5 T op View of Long Edge Feeds 1 represents dup l.
Pub lica tion No. GEG- 99197 May 04 3-8 T allyGenicom mL450 Laser Printer User Ma nual Paper Orientation Paper and Env elope Orient ation i n the By pass F eeder T op View of Short Edge Feeds (SEF) T .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-9 Paper and Envelope Orientation in the Bypass Feeder Long and Short Edge Duplex Bind ing in Po rtrait and Landscape.
Pub lica tion No. GEG- 99197 May 04 3-10 T allyGenicom mL450 Laser Printer User Manual Long and S hort Edge Duplex Bindin g in Por trait and L andscape Orie ntations Long Edge Duplex Bind in Landscape.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-11 Paper path fo r standard configuratio n Paper Paths Th e fo llowin g il lustr atio ns sh ow the paper path th rough the printer in its standard configuration and also when options are installed.
Pub lica tion No. GEG- 99197 May 04 3-12 T allyGenicom mL450 Laser Printer User Manual Paper Paths Paper p ath wh en option s are instal led The following illustration shows the printer with the optio.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-13 Paper path when options ar e installed installed 1. The paper is p ulled out of a paper cassette or the multi b ypass fee der . 2. The imag e is transfer red by the photosensitive drum.
Pub lica tion No. GEG- 99197 May 04 3-14 T allyGenicom mL450 Laser Printer User Manual Paper Deliv ery Paper output tray The standard output tra y enables printouts to emerge facing do wn.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-15 Face-up tray with the Dup l exer (option ) Face- up tray w ith the Duplexe r (o ption) When insta lled and selected, the face-up tray can store up to about 200 sheets of printouts coming out face do wn.
Pub lica tion No. GEG- 99197 May 04 3-16 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the 500-she et paper cass ette, T ray 1 or T ray 2 Fin isher/ Stapl er unit ( optio n) Adding paper to the 500-sh eet paper cassette, T ray 1 or T ray 2 1.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-17 Fini sher/ Stapl er uni t (opt ion) 2. Pre pare a stack of pape r . Make su re th e to ps of th e she ets are pr oper ly ali gned . 3. Gently lift up the length guide , and slide it all the wa y until it stops .
Pub lica tion No. GEG- 99197 May 04 3-18 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the 500-she et paper cass ette, T ray 1 or T ray 2 4. While pressing down the gray handle, slide th e side guide all the w ay un til stops . 5. Align the four cor ners of the paper an d place the paper in the ca ssette.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-19 Fini sher/ Stapl er uni t (opt ion) 6. Adjust the s ide guide to the pap er width. NOTE: Adjust the guide to the paper si ze corr ectly otherwise paper ma y not be tra nsported corre ctly and ma y resul t in paper ja m.
Pub lica tion No. GEG- 99197 May 04 3-20 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the multi bypa ss feeder 8. Adjust the length guide to the paper length. NOTE: Ma ke sure the guide st opper is locked firmly in the guide hole on the bott om of the cass ette.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-21 Fini sher/ Stapl er uni t (opt ion) 1. If ne cess ar y , pul l out t he ex tens ion t ray to a l ength desir ed fo r the pa per to be l oade d. 2. Place paper along the right side of the multi bypass feeder .
Pub lica tion No. GEG- 99197 May 04 3-22 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the HCF unit (2500 -sheet) 4. Insert the paper s tack as far as it c an go into the printer . T he pape r is no w ready for use . 5. When the paper is no longer required, remo ve it and p ush back the e xtension t ray if neces- sar y .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-23 T ray 3 (500-sh eet univers al paper casse tte) T ray 3 (500-sheet universal p aper cassette) 1. Pull out T ray 3 until it stops . 2. Pre pare a stack of pape r . Make su re th e to ps of th e she ets are pr oper ly ali gned .
Pub lica tion No. GEG- 99197 May 04 3-24 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the HCF unit (2500 -sheet) 3. Gently lift up the length guide , and slide it all the wa y until it stops . 4. While pressing down t he g ray handle , slide the si de guide all the way un til it stops .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-25 T ray 3 (500-sh eet univers al paper casse tte) 5. Align the four cor ners of the paper an d place the paper in the ca ssette. The paper sh ould enter easily between the guides .
Pub lica tion No. GEG- 99197 May 04 3-26 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the HCF unit (2500 -sheet) 7. Align the edges of the paper stack.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-27 T ray s 4 and 5 (A4/Let ter s ize paper compartment) 9. Insert a cor rect paper s ize label into the paper size sl ot on the cassette , then pus h the cassette all the wa y back into the printer until it latc hes.
Pub lica tion No. GEG- 99197 May 04 3-28 T allyGenicom mL450 Laser Printer User Manual Adding pa per to the HCF unit (2500 -sheet) 2. Pre pare a stack of pape r . Make su re th e to ps of th e she ets are pr oper ly ali gned . 3. Inser t paper into the compar tment.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 3-29 T ray s 4 and 5 (A4/Let ter s ize paper compartment) 4. Push T ray 4 bac k into the printe r . Loading enve lopes into the envelope feeder 1. Prepare a stack of env elopes .
Pub lica tion No. GEG- 99197 May 04 3-30 T allyGenicom mL450 Laser Printer User Manual Loading envelo pes into the en velope feeder 2. While lifting the env elope weight, in sert envelo pes with the flap-side up and the long e dges leading first. 3. Slide the side guide so that it slight ly touches the edges of the envelop e stack .
May 04 Publicati on No. G EG-9919 7 Chapter 4 Understanding and Navigating the Contr ol Panel Menus In this Chapter . . . “ About this Chapter ” on pag e 4-2 “Control P anel F eatures”.
Pub lica tion No. GEG- 99197 May 04 4-2 T allyGenicom mL450 Laser Printer User Manual Control Panel Features About this Chapter This chapter explains the contr ol panel and its functions , and also demonstr ates ho w to na vigate through th e control panel men us and submenu s that allow y ou to view and change the printer set- tings .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-3 Pushbu ttons Pushbu ttons The control panel pus hbuttons allow y ou to access and na vigate menu s , and also assist y ou in reco v ering from pr inter errors . The table below e xplains t he functions of the eigh t pushbuttons .
Pub lica tion No. GEG- 99197 May 04 4-4 T allyGenicom mL450 Laser Printer User Manual Navigating the Contr ol Panel Menus Navigatin g the Control Panel Menus When you press the MENU button on the contro l panel, y ou enter the print e r’ s m enu system.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-5 Pushbu ttons The fol lowi ng fi gure s hows the sequence of push buttons and d ispl ay messages that w ould a llo w you to change the number o f copies printed.
Pub lica tion No. GEG- 99197 May 04 4-6 T allyGenicom mL450 Laser Printer User Manual Menu Structure Menu Structur e Th e follow ing fi gure shows th e str uctur e of the cont rol pa nel m ain me nus and subme nus . Figure 4-3: Printer Menu Structure.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-7 Pushbu ttons NOTE: Additional menus and sub menus may appe ar in th e printer menu sy stem when other options ar e installed. Job Library 1. P ress the MENU button on the control panel.
Pub lica tion No. GEG- 99197 May 04 4-8 T allyGenicom mL450 Laser Printer User Manual Job Acc ounting Job Accoun ting The J o b A ccounting M enu pr ovid es access to funct i ons and s ettings related to t his feature. Use the following procedure to enter the Job Ac counting Menu to change the settings or access the func- tions : 1.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-9 Pushbu ttons Paper Menu The Paper M enu p rovide s acce ss to th e prin ter set tin gs for vario us pa per-hand ling funct ions. Use the following procedure to enter the paper menu: 1.
Pub lica tion No. GEG- 99197 May 04 4-10 T a llyGenicom mL450 Lase r Printer User Manual Paper Menu Media Siz e/T ype This submenu allows you to se t the media size and type for t he MBF T ray an d set th e medi al ty pe f or al l other tray s.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-11 Pushbu ttons Hole P unch This submenu allows you to turn the Ho le Punch fea tur e on an d off. This submenu is only available if the Finisher/Stapler is installed.
Pub lica tion No. GEG- 99197 May 04 4-12 T a llyGenicom mL450 Lase r Printer User Manual Interface Menu Inter face Menu The Interface Menu provides access to the printer interface settings . Use the following procedure to enter the in terface menu: 1.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-13 Pushbu ttons Parallel Setup This submenu allows you to set up the parallel interface.
Pub lica tion No. GEG- 99197 May 04 4-14 T a llyGenicom mL450 Lase r Printer User Manual Interface Menu Network Card 1 S etup This sub menu allows yo u to set up the Netw ork inter face.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-15 Pushbu ttons PS Menu The PS Men u provides access to the P os tScript settings . Use the following procedure to enter the PS Menu: 1. Press the MENU butto n on the con trol panel.
Pub lica tion No. GEG- 99197 May 04 4-16 T a llyGenicom mL450 Lase r Printer User Manual PCL Menu PCL Menu The PCL Me nu provides access to the PCL settings . Use the following procedure to enter the PCL me nu: 1. Press the MENU butto n on the con trol panel.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-17 Pushbu ttons Symb ol Set This submenu allows you to choose a symbol set.
Pub lica tion No. GEG- 99197 May 04 4-18 T a llyGenicom mL450 Lase r Printer User Manual PCL Menu FF Mode This submenu allows you to define the action pr ompted by a form fe ed—a form feed equ als either a form feed alone or a carriage return and a form fe ed together .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-19 Pushbu ttons Sy stem Menu The system menu pro vides access to system settings. Use t he following procedure to enter the sys- tem men u: 1. Press the MENU butto n on the con trol panel.
Pub lica tion No. GEG- 99197 May 04 4-20 T a llyGenicom mL450 Lase r Printer User Manual Sy st em Menu Wa i t T i m eo u t This submenu allows you to incr ease or decr ease the length of time (i n sec.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-21 Pushbu ttons Quality Menu The Quality Menu pro vides access to the prin ter settings that are related to pr int quality . Us e the following procedure to enter the Quality Menu: 1.
Pub lica tion No. GEG- 99197 May 04 4-22 T a llyGenicom mL450 Lase r Printer User Manual Fun ction s Menu Functions Menu The Functions Me nu pr ovides access to sev eral printer fu nctions t hat can supp ly you with in for ma- tion about th e printer and its settings .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-23 Pushbu ttons 6. Use the procedures in the following table to access and ch ang e the system settings: . DISK Menu NOTE: This menu selection will only ap pear if an optional har d disk d rive has been installed.
Pub lica tion No. GEG- 99197 May 04 4-24 T a llyGenicom mL450 Lase r Printer User Manual Status Menu 6. Use the procedures in the following table to access and ch ang e the system settings: .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 4-25 Pushbu ttons 4. Use the procedures in the follo wing table to view the status of the printer: Submenu Proced ure for Exec uting Func tion MBF This sub menu allows you to view the curr ent Medi a Size and Media T ype for the MB F tray .
Pub lica tion No. GEG- 99197 May 04 4-26 T a llyGenicom mL450 Lase r Printer User Manual Status Menu.
May 04 Publicati on No. G EG-9919 7 Chapter 5 Printer Consumables, Cleaning and Maintenance In this Chapter . . . “ About this Chapter ” on pag e 5-2 “Replacing the EP Cartridg e” on p.
Pub lica tion No. GEG- 99197 May 04 5-2 T allyGen icom mL450 Laser Printer User Manual Replacing t h e EP Cartridge About this Chapter Describes how to handle and re place the EP cart ridge, replaceme nt of transfer and feed rollers and perfo r mance of oth er steps as necessary for da y-to-day operati on of y our p rinter .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-3 Replacing the EP Cartridge When there is no more toner or the dr um must be replace d, an erro r messag e appears and the printer stops . Follo w the ste ps described in the following sections to replace the EP cart ridge with a new one.
Pub lica tion No. GEG- 99197 May 04 5-4 T allyGen icom mL450 Laser Printer User Manual Replacing t h e EP Cartridge 2. Open the front cover as indicated. 3. R emov e the EP car tridge. Li ft the orange handle on the cartridge to gently take it out . Then hold the handle and complete ly remov e the cart ridge.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-5 Replacing the EP Cartridge 4. R emo v e a new EP ca rtridge from the pac king, and pull out th e protecti ve pape r sheet from the drum shutter . 5. Hold the EP car tridge horizontally an d gently shake it 5 to 6 times to evenly distribute the toner inside .
Pub lica tion No. GEG- 99197 May 04 5-6 T allyGen icom mL450 Laser Printer User Manual Replacing t h e EP Cartridge 6. Open the front cover as indicated. 7. While holding the orange handle with one hand, gently push the cartridg e all the way into the prin ter.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-7 Replacing the EP Cartridge 8. Gently pull out the sealing tape in t he direction of the arrow . NOTE: If the tape i s pulled out at an an gle, it may b r eak po ssibly renderin g the car tridge u nusable.
Pub lica tion No. GEG- 99197 May 04 5-8 T allyGen icom mL450 Laser Printer User Manual Replacing t h e EP Cartridge Replacing the EP car tridge (when opt ions are install ed) 1. If the duplex printing u n it is installed, pull on its latc h to open it.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-9 Replacing the EP Cartridge 3. Open the front cover as indicated. 4. R emov e the EP cartridge. Lift the orange handle lev er on the cartridge to gently tak e it out.
Pub lica tion No. GEG- 99197 May 04 5-10 T allyGenicom mL450 Laser Printer User Manual Replacing t h e EP Cartridge 5. R emov e a new EP cartridge from the pac king, and carefully pu ll out the protecti ve paper sheet from the dr um shutter .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-11 Replacing the EP Cartridge 7. Open the front cover as indicated. 8. While holding the orange handle with one hand, gently push the cartridg e all the way into the prin ter.
Pub lica tion No. GEG- 99197 May 04 5-12 T allyGenicom mL450 Laser Printer User Manual Replacing t h e EP Cartridge 9. Gently pull out the sealing tape in the direction o f the ar row . NOTE: If the tape is pul led out at an an gle, it may break po ssibly renderin g the car tridge unu sable.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-13 Replacin g the Fu ser 11. Close the duplex print ing unit. Replacing the Fuser WARNING: The fuse r becomes very hot during operati on.
Pub lica tion No. GEG- 99197 May 04 5-14 T allyGenicom mL450 Laser Printer User Manual Replac ing the Fuser 1. Open the uppe r left cov er. 2. Open the front c ov er .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-15 Replacin g the Fu ser 3. Loosen the two locking screws indicated. (Y ou cannot remov e them completely .) 4. Hold the two ri ngs ind ica ted an d pul l out t he fu ser.
Pub lica tion No. GEG- 99197 May 04 5-16 T allyGenicom mL450 Laser Printer User Manual Replac ing the Fuser 5. Prepare a new fuser . While holding the two rings of the new fuser , push into th e printer as indicated. 6. Tighten the tw o locking scre ws .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-17 Replacin g the Fu ser 7. Re mov e and discar d the protecti ve co vers to expose the two metal fuser shipping screws 8.
Pub lica tion No. GEG- 99197 May 04 5-18 T allyGenicom mL450 Laser Printer User Manual Replac ing the Fuser 9. Complete ly remove and discar d the two meta l fuser ship ping screws 10.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-19 Replacing the T ransfer Roller Replacing the T r ansfer Roller 1.
Pub lica tion No. GEG- 99197 May 04 5-20 T allyGenicom mL450 Laser Printer User Manual Replac ing the Feed Rollers 3. Remo ve the transfer roller. 4. Inser t a new transfer roller and pr ess down to hold the roller in place . 5. Push the h andles to loc k th e transfer roller in place.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-21 Replac ing the Feed Rollers 1. R emo ve the top cassette f rom the prin ter unit. 2. While pressing the white tab , remov e the low er feed roller . NOTE: Be sure not t o remove the cou pling b ehind the fe ed roller .
Pub lica tion No. GEG- 99197 May 04 5-22 T allyGenicom mL450 Laser Printer User Manual Replac ing the Feed Rollers 3. Flip down the cov er and remove the upper tw o rollers with the same steps describ ed earlier . 4. While pressi ng the white ta b , remov e the uppe r tw o rollers .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-23 Replac ing the Feed Rollers 6. Inset a new low er feed roller . Tr a y 5 ( H C F U n i t ) 1.
Pub lica tion No. GEG- 99197 May 04 5-24 T allyGenicom mL450 Laser Printer User Manual Replac ing the Feed Rollers 3. Pull the roller cov er tow ards you. 4. While press ing the white tab , remove the three feed rollers NOTE: Be sure not t o remove the cou pling b ehind the fe ed roller .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-25 Replac ing the Feed Rollers 7. R e-insert the T ray 3. Tr a y 4 ( H C F U n i t ) 1. Pull out the left tr ay . 2. Open the low e r left cov er . Press down the roller co ver .
Pub lica tion No. GEG- 99197 May 04 5-26 T allyGenicom mL450 Laser Printer User Manual Cleaning NOTE: Be sure not t o remove the cou pling b ehind the fe ed roller .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-27 Cleani ng Clean the exte rior of the printer Clean the ex terior of the printe r about onc e a month. Use a so ft cloth s lightly moiste ned with water . F or stubborn stains , soak the cloth in a m ild deterg ent so lution before cleaning .
Pub lica tion No. GEG- 99197 May 04 5-28 T allyGenicom mL450 Laser Printer User Manual Daily Maintena nce Daily Main tenance At the end of the day , tur n off the printer by setting the powe r switch to [0]. If any error mes sage or status code appears, see ”Chapter 6 T roubleshooting” a nd turn off the printer pr operly .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-29 Preparing the Printer for a Period of Extend ed Non-Use 1. T urn off the printer by setting the po wer switc h to the [0] p osition. If any er ror m essage o r status code appear s , see ”Chapter 6 T roublesho oting” and tur n off the printer properly .
Pub lica tion No. GEG- 99197 May 04 5-30 T allyGenicom mL450 Laser Printer User Manual Relocating th e Printer 3. Remo ve any paper from the multi b y pass feeder as well as all the paper cassettes . Store the paper in a location t hat is not hum id and dus ty .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-31 Relocating the Printer NOTE: Remove any opt ions such as the dup lex prin ting unit be for e movin g the printe r . For instruc tions on how to remove the options, see the approp ri ate section.
Pub lica tion No. GEG- 99197 May 04 5-32 T allyGenicom mL450 Laser Printer User Manual Relocating th e Printer 3. Remo ve any paper from the multi b y pass feeder as well as all the paper cassettes .Store the paper in a location t hat is not hum id and dus ty .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 5-33 Relocating the Printer 5. Re mov e th e EP cartridg e inside the printer. If the printer is moved with the cartridg e inside, toner may sp ill out and soil the printer .
Pub lica tion No. GEG- 99197 May 04 5-34 T allyGenicom mL450 Laser Printer User Manual Relocating th e Printer.
May 04 Publicati on No. G EG-9919 7 Chapter 6 T r oubleshooting In this Chapter . . . “ About this Chapter ” on pag e 6-2 “Solving Print er Po wer -on Proble ms” on page 6-2 “Sol.
Pub lica tion No. GEG- 99197 May 04 6-2 T allyGen icom mL450 Laser Printer User Manual Solving Printe r Power-on Pro b lems About this Chapter Explains proc edures to isolate and solv e problems that ma y occur during us e of your printer .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-3 Solving Prin t Quality Pr oblems This section de scribe s quality pr oblems du ring pri nting . Go t hrough the list below to find t he con- diton tha t most cl osely rese mbles t he problem and follo w the r e commend ed action.
Pub lica tion No. GEG- 99197 May 04 6-4 T allyGen icom mL450 Laser Printer User Manual Solving P rint Quality Problems Charac ter void s Prin t media i s out side recommend ed specifications Use r ecommen ded print media . See ”Chapter 5 Printer Consumables, Cleaning and M ain tenan ce” .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-5 Part ial blanks Print media is moist Remove moist media and load new dry medi a. See ”Chapter 5 Printer Consumables, Cleaning and Maintenance” . Print media is outside recommend ed specifications Use r ecommen ded print media .
Pub lica tion No. GEG- 99197 May 04 6-6 T allyGen icom mL450 Laser Printer User Manual Clearing Paper Jams Clearing Paper Jams This section provide information for re movi ng paper ja ms from paper p ath areas of y our printe r and pape r handlin g options .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-7 Clearing Paper Jams from Ar ea A 2. Pull on the latch to open the upper left cov er . If the op tional face up tra y is insta lled instead o f the duplex er , lift to unhook and r emo v e the face up tray .
Pub lica tion No. GEG- 99197 May 04 6-8 T allyGen icom mL450 Laser Printer User Manual Clearing Paper Jams If the lea ding edge of the pap er is already in the paper output tray , p ull out the paper in the direction of the ar row .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-9 Clearing Paper Jams from Ar ea A If the paper is jammed at the indicated locati on, pull it out in the direction of the ar row . 4. Open the cover inside the dup lexer .
Pub lica tion No. GEG- 99197 May 04 6-10 T allyGenicom mL450 Laser Printer User Manual Clearing Paper Jams 6. Close the cov e r inside the duplexer 7. Close the duplexer . NOTE: When closing the duplexer, do not use the l atch on the c over . Ins tead, foll ow the inst ruction label on the c over and push t he recommend ed locati on.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-11 Clearing Paper Jams from Ar ea B 8. Close the duplexer or reinsert the face-up tra y as appropriate. Clearing Pap er Jams f r om Ar ea B 1. Pull on the latch to open the co ver t o Area B 2.
Pub lica tion No. GEG- 99197 May 04 6-12 T allyGenicom mL450 Laser Printer User Manual Clearing Paper Jams 3. If the paper is jamm ed at Area B , pull it out in the direction of the ar row as shown. If no paper jam is found consult th e LCD display of the control panel for inform ation about a pos- sible jam i n a paper tra y .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-13 Clearing Paper Jams from Area E Clearing Pap er Jams f r om Ar ea E Lift the handle of the Stapler/Stacke r docking cov er and rem ov e an y jammed paper found.
Pub lica tion No. GEG- 99197 May 04 6-14 T allyGenicom mL450 Laser Printer User Manual Clearing Paper Jams Clearing Pap er Jams f r om Ar ea H R emo v e any jamme d pape r found. Clearing Pap er Jams f r om T ray 1 Pull out T ray 1. Check the p aper feed area and carefully pull out any jamm ed paper found there.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-15 Clearing Pap er Jams from T ray s 3, 4 and 5 in the HCF un it 2. Pull out Tra y s 4 and 5 . 3. Check the paper feed area of T ray 5 and remov e any jammed paper foun d 4.
Pub lica tion No. GEG- 99197 May 04 6-16 T allyGenicom mL450 Laser Printer User Manual Clearing Paper Jams Clearing Pap er Jams f r om th e Multi-Bypass F eeder (MBF) 1. R emov e the jamm ed paper by p ull it out in the direction of the ar row as sho wn.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-17 Clearing Pap e r Jams fr om the Envelope Fee der 2. R emov e any jammed paper found.
Pub lica tion No. GEG- 99197 May 04 6-18 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages Code Class 1 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R M.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-19 Code Class 2 Code Cl ass 2 Code Cl ass 3 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ U.
Pub lica tion No. GEG- 99197 May 04 6-20 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages Code Cl ass 4 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-21 Code Class 4 4-5 FUSER ERROR CALL SERVICE Abnormally high Fuser temperature Service Call r equired 4-5 IRREG.
Pub lica tion No. GEG- 99197 May 04 6-22 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages 4-26 FINISH JAM CLEAR AREA F Remaining paper detected on TRANS POR T exit sensor Cle.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-23 Code Class 5 Code Clas s 5 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ UIRE D AC T I O.
Pub lica tion No. GEG- 99197 May 04 6-24 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages 5-92 FIN ERROR CALL SERVICE Finisher Stapler head home sensor failur e (see note 3) .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-25 Code Class 6 Code Cl ass 6 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ UIRE D AC T I O.
Pub lica tion No. GEG- 99197 May 04 6-26 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages Code Cl ass 7 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ UIRE D AC T I O N 7-1 COVER OPEN CLOSE DOOR G Finisher fr ont cover is open Close Finish er front cover – Door G 7-2 COVER OPEN FIN.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-27 Code Class 8 Code Cl ass 8 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ UIRE D AC T I O.
Pub lica tion No. GEG- 99197 May 04 6-28 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages Code Clas s 9 LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 6-29 Alphanume ri c Code Clas s Alphanumeric Code Clas s LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ER.
Pub lica tion No. GEG- 99197 May 04 6-30 T allyGenicom mL450 Laser Printer User Manual Contr ol Panel LCD Mess ages Contr oller Err or Messages LCD MESSAGE (LINE 1) LCD MESSAGE (LINE 2) CAUSE OF ERRO R MESSAG E REQ UIRE D AC T I O N SERVICE ERROR X (X IS A NUMBER) CALL SERVICE A fatal exception has occure d on the printer contro ller .
May 04 Publicati on No. G EG-9919 7 Chapter 7 Optional Extended Featur es In this Chapter . . . “ About this Chapter ” on pag e 7-2 “Installing DRAM Memor y DI MMS” on page 7-2 “.
Pub lica tion No. GEG- 99197 May 04 7-2 T allyGen icom mL450 Laser Printer User Manual Installing DRA M Memory DIMMS About this Chapter This ch apter de scribes the p rocedure s for i nstallation of DRAM Memory DIMMs and F LASH DIMMS. Al so desc ribes how t o use th e exte nd ed fe atures associated with these optio ns.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-3 3. T urn thumbscrews on controller assembly countercloc kwis e until loo se and gently pull con- troller assembly tow ards you to r emov e from printer .
Pub lica tion No. GEG- 99197 May 04 7-4 T allyGen icom mL450 Laser Printer User Manual Installing DRA M Memory DIMMS 5. R einstall t he controller assembly . Once fir mly in place , push and ha nd tighten the thumb- screws in a cloc kwise direction. 6.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-5 Inst alling a FLASH D IMM Mo dule 1. Ensure that t h e printer po wer switc h is se t to the OFF [ O ] positio n. 2. Disconnect the power cord from the wa ll outlet.
Pub lica tion No. GEG- 99197 May 04 7-6 T allyGen icom mL450 Laser Printer User Manual Installing a FLASH DIMM Module 4. Carefully inser t a FLASH DIMM module in FLASH DIMM slot as sho wn below . W hen properly seated, gen tly push down on the DIMM until the white braces close onto the ends of the DIM M.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-7 6. Connect the power cord to the wall outlet. 7. T urn the printer po wer switc h to the ON [ I ] position.
Pub lica tion No. GEG- 99197 May 04 7-8 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module Operat or Panel MENU Structur e When the Hard Di sk or U ser F lash opt ion is ins talled, the pr inter contr ol panel menu struc ture is enhanced as sh own in the following tab le.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-9 Using the Disk Me n u NOTE: 1. The Flash Menu and Disk Menu will only appear when the r espective FLASH SI MM and/or Hard Disk option is installed.
Pub lica tion No. GEG- 99197 May 04 7-10 T allyGenicom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module Format Fl ash This se lectio n will refo rmat the FLA SH SI MM. All files o n the FL ASH S IMM wi ll be dele ted if this fu n ctio n is sele cted.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-11 PostScript Operators Post Script Op erators All of the stand ard file-object related op erators (f ile, read, write, etc .
Pub lica tion No. GEG- 99197 May 04 7-12 T allyGenicom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module The fi rst feature is th e warmstart.ps f ile. Each time the printer is po wered on, either or bo th opti onal stora ge dev ices will b e chec ked fo r a fil e name d warmsta rt.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-13 Powe r -on File s De fined Using the Power -On Files Featur e Power-on F iles De fined If a F LAS H DI MM or ha r.
Pub lica tion No. GEG- 99197 May 04 7-14 T allyGenicom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module Collating, Saved Jobs, and Job A ccounting The featur es discuss ed in t his sectio n are designed to w o r k wit h the Har d Disk O ptio n.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-15 Collating Featur e 1. Pr e s s t h e Pr inting P rop erties button printer icon.
Pub lica tion No. GEG- 99197 May 04 7-16 T allyGenicom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 3. Click on the P a per Quality button and then the Advanced button. 4. Click on the Co py Coun t bu tton to enter the number of copies and make sure the Collat e button is checked.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-17 Saved Jo bs Featur e z PCL - All wi ndows platforms z P ostScript - W indows 2 000 and Windows XP There are three job types avail able, N ormal, Saved, and Private.
Pub lica tion No. GEG- 99197 May 04 7-18 T allyGenicom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 1. Yo u a r e n o w i n t h e Pri n t in g Pr o p e r t i e s menu, click on the Pr i n t i n g Pre fe re n c e button.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-19 Saved Jo bs Featur e 3. N ow scr oll down to th e Job T yp e Section of the menu. 4. When you click on J ob T ype, three job typ es are available. No r m a l , S a v e d , and Pri v a t e .
Pub lica tion No. GEG- 99197 May 04 7-20 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 5. If yo u w ant to Save your print jo b, enter a name you want to save the job as and it will be saved under U ser ID folder listed.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-21 Saved Jo bs Featur e 1. Pr e s s t h e MEN U button on the control panel. 2. P res s the NEXT button until the text “ Jo b L i b r a r y Me nu ” is shown on the second line of the display .
Pub lica tion No. GEG- 99197 May 04 7-22 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module Job N ame INCOR RECT PIN 1. If an incorrect PIN is entered, p ress PREVIOUS to re-enter t he correct PI N. Job N ame Copi es - Sele ct 1-99 1.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-23 Saved Jo bs Featur e We b Page Access U s ing the printer web page, yo u can de lete, prin t, or d ownload an y job fi les stored in the job library . Go to your web bro wser and type in your printe r web addre ss.
Pub lica tion No. GEG- 99197 May 04 7-24 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 3. The pr inter job info rmation will appear . If there is a PIN number associated with the fil e, you will be requ ired to enter the correct PIN number to access the pri nt file.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-25 Job Acc oun ting Featur e Use the procedures in the following table to access and ch ang e the system settings .
Pub lica tion No. GEG- 99197 May 04 7-26 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 1. Click on J ob Account ing.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-27 Job Acc oun ting Featur e 3. When you clic k on Enab le/Disa ble it will take you to the followin g screen. C lick Y es o r N o to Enable or Disab le Jo b Accounti ng.
Pub lica tion No. GEG- 99197 May 04 7-28 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 5. When y ou clic k on Display Job Accou nting Info it w ill brin g you th e fol lowing sc reen whic h disp lays a ll you r job infor matio n.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-29 Operator Panel Acc ess Using th e Custom Paper Size Feat ure There are two ways to work with the Custom P aper Size F eature. One is through the front panel menus , the oth er is throu gh the print er driver .
Pub lica tion No. GEG- 99197 May 04 7-30 T allyGen icom mL450 Laser Printer User Manual Using the Har d Disk Option and User Flash DIMM Module 3. Click on the Adva nce d button .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-31 Printer Dr iver Access 4. Click on the P aper Size button. 5. Scroll down to C ustom P age Size and click.
Pub lica tion No. GEG- 99197 May 04 7-32 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 6. Then enter the wi dth and height of your c ustom paper size . 7. Click the OKA Y button until you exit out of the driver menu.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-33 Resolu tion T o use the new form as the default form, f ollow these steps: WINDOWS NT In CO NTR O L P ANEL , do uble-cli ck PRINTERS . Right-click the pri nter you want to select, and then clic k DOCUME NT DEF A UL TS .
Pub lica tion No. GEG- 99197 May 04 7-34 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 Accessing the Pr inter W eb Page Y ou can access the printer web page by going to th e internet browser and typing th e IP address of your network printer (http://IP ADDRESS).
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-35 Resolu tion Main Page of Printer W eb Site Su bmenu 1 of Printer Web Site Submenu 2 of Printer Web Site Printer Setup Y ou can vi ew an d chan ge pr inter configuration.
Pub lica tion No. GEG- 99197 May 04 7-36 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 PCL Menu Provides access to the PCL settings.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-37 Resolu tion Console S ecurity Refr esh Rate Suppor t Link Supplies Link Admin. Na me Password Confirm Password File Management* Allows y ou to acc ess (p rint or delete) files stored on your Har d Disk or User Flash.
Pub lica tion No. GEG- 99197 May 04 7-38 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 NOTE: *These menus only appear if you have a Ha rd Disk or User Fla sh Option insta lled.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-39 Contro l Panel MENU structure Using the RS-232C/RS-422 Serial In terface This se ction l ists the Serial Inter face set up fe atur es and available sel ections via the co ntrol panel menus.
Pub lica tion No. GEG- 99197 May 04 7-40 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 NOTE: The structure of your display menus may vary slig htly depending on the options installed in your print er .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-41 Contro l Panel MENU structure Interpreter Format Serial Mode Baud Rate Data Bits Stop Bits Parity AV AILABLE SELE.
Pub lica tion No. GEG- 99197 May 04 7-42 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 DTR Read y/Busy DTR On/Of f DTR Error RTS Re.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-43 Disabling the Serial Inter face XON Error DTR Polarity RTS Pola rity Robust XO N Disabl ing the S erial In ter fa.
Pub lica tion No. GEG- 99197 May 04 7-44 T allyGen icom mL450 Laser Printer User Manual Custom Page siz e and Micr osoft Wor d, W or d 2000, and W ord 2003 RS-232C Serial Cable Pin Assignments Eight p.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual 7-45 Obtaining Help and Information and where x indi cates the netw ork slot where the ser ial interface i s installed.
Pub lica tion No. GEG- 99197 May 04 7-46 T allyGen icom mL450 Laser Printer User Manual The type of host comp uter you are using. .
May 04 Publicati on No. G EG-9919 7 Appendix A General Information “ About this Appendix ” on page A-2 “Specific ations” on pa ge A-2 “Printable Are a” on page A-3.
Pub lica tion No. GEG- 99197 May 04 A-2 T allyGenicom mL450 Lase r Printer User Manual Spec ifica tio ns About thi s Appen dix Provides printer specifications and infor mation on the EP cartr idge and the printable area of a pag e.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual A-3 Normal prin ting Do not remov e the EP car tridge from its packing until use . If it is removed, immediately put it bac k into the pac king . A void direct sunlight.
Pub lica tion No. GEG- 99197 May 04 A-4 T allyGenicom mL450 Lase r Printer User Manual Printable Area.
May 04 Publicati on No. G EG-9919 7 Appendix B Safety Notes and Regulatory Compliances In this Chapter . . . “ About this App e ndix” on page B-2 “Sa fet y Notes ” on pa ge B-2 “.
Pub lica tion No. GEG- 99197 May 04 B-2 T allyGenicom mL450 Laser Printer Us er Manual Safety Notes About thi s Appen dix Describes cautions to take when installing, transporting, or operati ng t he printer . Also includes applicable regulator y compliances of y our printer .
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual B-3 Location an d Envir onment Pre cautions Switch off the machine before connecting the interface c able or optional accessor y . Connec ting the cable or accessor y with a liv e ma ch ine can cause a sh oc k hazard.
Pub lica tion No. GEG- 99197 May 04 B-4 T allyGenicom mL450 Laser Printer Us er Manual Safety Notes Fir e, Smoke a nd Shock Pr ecautio ns Do not place any liquid container such as a vase or coffee cup on the mac hine . Spilled water can cause a fire or shock hazard.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual B-5 Class B Equipment Regulatory Compliances Class B Equ ipment This equipm ent has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of FCC Rules .
Pub lica tion No. GEG- 99197 May 04 B-6 T allyGenicom mL450 Laser Printer Us er Manual Regulatory Com pliances Since radiation emitted inside the printer is comple tely confined within the protective housin gs and external cov ers , the laser beam c annot esca pe from th e machine during any phase of u ser opera- tion.
May 04 Publicati on No. G EG-9919 7 Appendix C T allyGenicom Customer Suppor t an d Par t Number s In this Chapter . . . “ About this Appendix ” on page C-2 “Sources of Support” on pag.
Pub lica tion No. GEG- 99197 May 04 C-2 T allyGenicom m L450 Laser Print er User Manual Sources of Su ppor t About thi s Appen dix This appendix lists the part numbers for T allyGenicom Intelliprint mL450 pr inters , options , and consumables . T o order parts , contact y our loca l authorized T allyGenicom dealer.
May 04 Publicati on No. G EG-9919 7 T allyGenicom mL450 Laser Printer User Manual C-3 Printers T allyGenicom Intellip rint mL450 Part Numbers Prin ters Paper Handlin g and Othe r Options Network Inter.
Pub lica tion No. GEG- 99197 May 04 C-4 T allyGenicom m L450 Laser Print er User Manual T ally Genicom Intelliprint mL450 Par t Numbers DRAM, FLASH DIMM, Barc ode and Har d Disk Drive Opti ons Consuma.
An important point after buying a device Tally Genicom mL450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tally Genicom mL450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tally Genicom mL450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tally Genicom mL450 you will learn all the available features of the product, as well as information on its operation. The information that you get Tally Genicom mL450 will certainly help you make a decision on the purchase.
If you already are a holder of Tally Genicom mL450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tally Genicom mL450.
However, one of the most important roles played by the user manual is to help in solving problems with Tally Genicom mL450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tally Genicom mL450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
