Instruction/ maintenance manual of the product DS2.0 Ver. 2.0240 Synology
Go to page of 123
User’s Guide （ Document #: SDS2.0-050915_enu ） Based on DS2.0 Ver. 2.0240.
Synology DS-101j Copyright Notice All title, copyright and othe r intellectual property right s in and to the Software Product (including but not limited to any relevant m edia, images, photographs, a.
Synology DS-101j Limited Warranty Synology provides limited warranty for its product only to the person or entity that originally purchased the product from Synology or its authorized distributor or retailer.
Synology DS-101j Safety W arnings and Instructions Please read this safety warnings and instru ctions carefully before use, and keep it well for your future reference. 1. Be sure to read and follow all warnin g notices and instruction s. 2. Do not place Synology DS-101j Di sk Station in direct sun light or near chemicals.
Synology DS-101j 7. There are slots on the side covers for ve ntilation. To make sure Synology DS-101j Disk Station is operating under normal c ondition, please do not block or cover those slots to avoid its being overheat. 8. The operation temperature is from 50°F to 90°F (10°C to 35°C).
Synology DS-101j Table of Contents Copyright Notice ................................................................................................................. 2 Trademark Notice ..................................................................
Synology DS-101j 3. Share ..................................................................................................................... 54 4. Time ................................................................................................
Synology DS-101j About this User’ s Guide This User’s Guide covers the Synolo gy DS-101j Disk Station’s hardware, installation, operation and tr oubleshooting, etc. Each chapter provides detailed information and helps you acquire clear c oncepts of the operation of the Synology DS- 101j Disk Station.
Synology DS-101j Chapter 1 Get to Know you r DS-101j Disk S tation 1.1 Introduction Congratulations on your purchase of Synology DS-101j Disk Station! Synology DS-101j Disk Station is a 6-in-1 server special ly designed for SOHO, home users, and workgroups.
Synology DS-101j In addition, the Synology DS-101j Disk Station also offers an FTP service. You can use the FTP service to upload a nd download files directly from the W eb management Graphic User Interface (GU I) of the Synology DS-101j Disk Station.
Synology DS-101j 11.
Synology DS-101j 1.2 Get Started Before use, please read this User’s Gu ide thoroughly and use the DS-101j Disk Station only in accordance with the instructi ons in the User’s Guide. Also keep this User’s Guide in a secure place where it can be referred to eas ily.
Synology DS-101j 1.3 Install HDD 1. Prepare a 3 1/2 “ IDE HDD which is bra nd new or never been formatted by DS- 101j Disk Station, and adjust th e jumper to “Master” position. 2. Screw up the two HDD holding bracke ts on both sides of the HDD. 3.
Synology DS-101j 5. Connect the power plug and IDE HDD cable to the HDD. 6. Attach the HDD brackets to the main board using 4 screws provided. 7. Attach the aluminum foil sticker be tween the hard disk and LAN port as described in the picture. This can also help to e lim inate electromagnetic waves.
Synology DS-101j 9. Tighten the last two screws on the back of the side cover to finish the HDD installation. Warning: Please do not have AC adapter connected to the power when installing th e HDD during above steps. 10. Connect the AC adapter and the LAN cab le to the DS-101j.
Synology DS-101j 1.4 Synology DS-101j Disk Station Applications With keen innovation and state-of-the-a rt design technology, DS-101j Disk Station is an ideal NAS device for the fo llowing applic ations.
Synology DS-101j family. The Synology DS-101j Disk Station is easy to install, configur e, and operate for home users. It’s a DHCP-enabled device. When it’s conne cted to an IP sharing Router, it will search for and acquire an IP address automatically.
Synology DS-101j 1.5 Synology DS-101j Disk Station Advantages 6-in-1 Server The Synology DS-101j Disk Station is a 6-in-1 server. A file server for file storing and file sharing; a backup server which.
Synology DS-101j • Automatic file backup for Windows c lients with installation of Synology Data Replicator • Easy to use Web-based Synology mana gement UI and user friendly Web- based help • Ne.
Synology DS-101j 1.6 Limitations 1. DS-101j supports up to 1 USB printer with a USB hub or without. 2. DS-101j supports up to 3 USB disks without a USB hub, and m ultiple card readers. 3. USBCopy function only supports USB disks under 4GB capacity. 4.
Synology DS-101j 1.7 Software Features Network Transport Protocols: TCP/IP AppleTalk Network File Protocols: Microsoft Networks CIFS Apple File Protocol AFP 3.0 Client Support: Microsoft Windows 98 / ME / NT 4.0 / 2000 / XP / Windows Server 2003 Apple Macintosh OS 7.
Synology DS-101j 1.8 Hardware Specificatio ns Processor: Intel IXP420BB Memory: 32MB SDRAM 2MB Flash IDE Port: 1 X IDE Port for HDD Network Connection: RJ-45 10/100Mbps Ethernet USB Support: USB 2.
Synology DS-101j Chapter 2 Install your DS -101j Disk S tation 2.1 Synology DS-101j Disk Station External Components Front Panel A. LED meanings POWER LED – The POWER LED light will blink when turning on and shutting down the DS-101j Disk Station. It will remain lit up while the machine is powered on.
Synology DS-101j C. USB COPY button with LED – The USB COPY button will light up when you plug in a USB device. Press this button and it will copy the data from th e connected USB device to the DS-101j Disk Station’s internal HDD.
Synology DS-101j 2.2 Table of LED Descriptions The table can help you get to how DS-101j Disk Station is w orking by LED status. LED Indication Color Status Description Blinking 1.
Synology DS-101j Chapter 3 Install your DS -101j Disk S tation 3.1. DS-101j Disk Station Quick Installation Step 1. Please check the following conditions for connecting DS-101j on the network. Condition 1, Office Network: 1. Connect the AC power adapter to the DS-101j Disk station, and plug the AC power cord into a power outlet.
Synology DS-101j Condition 3, Home Network without IP Sharing: 1. Connect the AC power adapter to the DS-101j Disk station, and plug the AC power cord into a power outlet. 2. Without IP sharing, you need to install a router to set up the network first.
Synology DS-101j Step 2. Run the setup utility – DSAssistant 1. Insert the DS Resource CD into your PC’s CD-ROM drive. 2-A Windows users: 1) An auto-run menu should appear after a few seconds. 2) If the auto-run menu does not appear, click Start button on the bottom left of the screen, and select Run.
Synology DS-101j 2-B Mac users: Warning: DS-101jj Disk Station does not support installing on Mac OS 9. 1) Double click on the icon of CD-ROM. 2) Double click on the icon to open it and select the operation system you use. 3) Double click on DSAssistant icon to run the program.
Synology DS-101j 3. The setup of the DS-101j Disk Station is performed using the following steps: Please perform the following steps to complete the setup of the DS-101j Disk Station. Connect the AC power adapter to the DS-101j Disk station, and plug the AC power cord into a power ou tlet.
Synology DS-101j 5. Press the power button on the DS-101j Disk Station’s front panel to turn the DS- 101j Disk Station on. Wait until the POWE R LED becomes solid in blue light. Click Next to run DSAssistant. 6. DSAssistant will help you to finish the setup s imply in a few clicks.
Synology DS-101j 10. Choose to set up the Disk Station step by step by yourself, or to complete the system configurations autom atically us ing One-Click Setup. The wizard will then automatically assign a DHCP IP for the system. 11. If you chose One-Click Setup, please refer to Step 17 to continue.
Synology DS-101j 13. Enter the administrator’s password (set the password by yourself) and re-enter to confirm it; then click Next to go on. Keep the password in mind for later use. 14. Now, select the network setting. You can get it automatically or you can set the IP manually.
Synology DS-101j 15. Please select the time zone of your loca tion. Then enter the date and tim e of the system. Then click Next to continue. 16. Check the settings again and if they are correct, click Finish .
Synology DS-101j 17. Refer to the window to check progress. 18. While the H DD is being formatted, the POW ER LED will start blinking again. Please wait until the POWER LED shows a c onstant blue light, and the S TATUS LED a constant green light. 19. Congratulations! The DSAssistant se tup has now completed successfully.
Synology DS-101j Step 3. You can start to use DS-101j Disk Station. Welcome to use the DS-101j Disk Station; and you can start to store your data. 3.1. After the DSAssistant setup completed, pl ease enter the adm inistrator’s password which you entered in 3-13, and you can st art to use the DS-101j Disk Station.
Synology DS-101j Step 4. Map drive of shared network folder that you will often access in the future. Warning: Map drive function is for Windows only. Mapping a shared folder as a mapped network drive makes it easy and quick to access the shared folder from My Computer on y our desktop.
Synology DS-101j 4.2. Map drive wizard will list the shared netw ork folders that you can access on the selected DS-101j Disk Station. Click on th e folder you want to connect, and click Next to continue. 4.3. Enter a user name in Account column, and password in Password colum n.
Synology DS-101j 4.4. You will see the following page if you ma p a network drive successfully. You can either enter the shared folder by clicki ng Finish button or through “My Computer” later on.
Synology DS-101j 3.2. Tips – Without DS Resource CD, you can also use and manage DS-101j easily with the following tips. 1. Copy or access data on DS-101j Disk Station from PC.
Synology DS-101j 1.3 Then you can see all shares that can be used, including the public share. Access “public” and then you can start to use this folder.
Synology DS-101j 2. Use Microsoft Internet Explorer to manage DS-101j Disk Station from PC or Mac. 2.1 Open your Microsoft Internet Explor er. (IE 6.0 or above for PC, 5.2 or above for Mac.) 2.2 Enter “http:// system-name:5000” (type two forward slashes followed by the system name; the system name should be the same as what you entered in 3-12.
Synology DS-101j 2.4 Then you can start to manage your DS-101j Disk Station from the management page. 43.
Synology DS-101j 3. Use Microsoft Internet Expl orer to change your user information on DS-101j Disk Station. 3.1 Open your Microsoft Internet Explor er.
Synology DS-101j 3.4 Then you can view your account inform ation on this Disk Station and modify it. 45.
Synology DS-101j Chapter 4 Manage your DS-101j Disk S tation Please note that the DS-101j Disk Station only supports browser based management using Internet Explorer 6.
Synology DS-101j 2. Status In this page you can see a summary of a ll system devices and their status. The information is only for y our reference. You will not be able to do any modifications here. If you want to cha nge any settings, please go to Wizard in Tools.
Synology DS-101j 3. Log In this page you can see five items, which are System log, Connection log, Current connection, Backup log, and USB C opy log. These five logs are just like a diary keeping a reco rd of all the actions and even ts on the DS-101j Disk Station.
Synology DS-101j 4. About In this page we have put our Copyrig ht Notice and Trademark Notice for your reference. 49.
Synology DS-101j 4.2 System (System Setting) 1. User In this page you may add or remove users who can access th e DS-101j Disk Station. A user account is assigned its na me and password by the administrator. This password is used to obtain the data in side the shared folder.
Synology DS-101j To create a new user Step 1 Click Create button to add a new user. Step 2 Enter the name of the user in the User name column; this shou ld reflect the us er added. Step 3 Enter the user’s full nam e in the User description colum n. The user description will help to identify different users on the DS-101j Disk Station.
Synology DS-101j 2. Group In this page you may classify users who can access to DS-101j Disk Station into groups. Setting up groups can help you assure data security. For example, a user group is a group of users with specific access privileges to a specific shared folder.
Synology DS-101j To create a new group Step 1 Click Create button to add a new user group. Step 2 Enter the name of the group in the Group name colu mn; this should reflect th e types of users added. Step 3 Enter a description of the group added in the Group description column.
Synology DS-101j 3. Share In this page you may create folders so th at you can store data on the DS-101j Disk Station via network. Meanwhile, you may also assign access privileges of users or groups on the local network. Access to shares can be controlled via Group and User permissions.
Synology DS-101j To create a new share Step 1 Click Create button to add a new share. Step 2 Enter the name of the share in the Share name colum n ; this should reflect the purpose of shares added. Step 3 Make some description about the share added in the Description column.
Synology DS-101j To assign privileges of users and groups to access shares: Warning: Before you assign access privileges, please note two following points: If your account name is not on the user list, th e system will automatically transform your account name into “guest”.
Synology DS-101j Step 1 Click Edit to turn on users or groups permi ssions. By assigning different access privileges you have the abil ity to secure a share. Step 2 You can assign different privileges to users or groups. There are three kinds of privileges which are No access (NA), Read only (RO), and Writeable (RW ).
Synology DS-101j Step 3 Click the privilege button you wish to assign to the users or groups you chose in the previous step, and click OK to apply all setting.
Synology DS-101j 4. Time In this page you may set up time. The tim e must be set to work on exact schedule and maintain proper logs. Choose the time z one first so the DS-101j Disk Station can configure the time correctly. You can either set the proper time and date manually or connect to an NTP (Network Time Protocol) time server.
Synology DS-101j 5. Hardware Manager In this page we provide three services. Power Recovery Check the checkbox to enable the Power Recovery function. The system will boot up automatically when power is supplied after the system shuts down abnorm ally because of power failure.
Synology DS-101j To set up the time Step 1 Click the Idle time column, and select the tim e you wish. Step 2 Click OK to apply all setting. 61.
Synology DS-101j 4.3 Network (Network Setting) 1. LAN In this page you will have to enter a serv er n ame for identifyin g the system on the network. Below this you need to choose an IP setting. By default, the DS-101 j Disk Station will attempt to obtain an IP address f r om a DHCP server.
Synology DS-101j 2. Win/Mac OS In this page, the setting of Wo rkgroup or AppleTalk Zone allows you to access the DS-101j Disk Station through “My Network Places.
Synology DS-101j Workgroup A Workgroup means a collection of com puters that are under the same network; setting workgroups allows you to manage network access easily.
Synology DS-101j 3. FTP Service DS-101j Disk Station offers a facility for downloading or uploading all kinds of data easily and efficiently using Micr osoft Internet Explorer 6.0 or above. This page allows you to control whether the FTP service is available.
Synology DS-101j 4. Web Service DS-101j Disk Station offers Synology P hoto Station as an online album, and Synology Web Station as a web server. Th e Synology Photo Station is an auto- build service that will genera te image files auto matically, al lowing users to easily create online albums.
Synology DS-101j 5. Mail (E-mail Notification) In this page you may enter your e-m ail address. The DS-101j Disk Station will send e-mails to notify th e administrator when any important and critical events or errors occur. Please enter the SMTP server and assign up to 2 e-m ail addresses for getting the notifications.
Synology DS-101j 4.4 Tools 1. Wizard In this page the Wizard will guide y ou through setting up the DS-101j Disk Station step by step. Click on the Run Wizard button to go through the settings. Step 1 System Setting . You will need to confirm your server name and your password.
Synology DS-101j Step 2 LAN Setting . You will need to choose whether you want to get the IP directly from a DHCP server or manually. Click Next to continue. Step 3 Time Setting . You will have to select the ti me zone of where you are, and set up the time of the DS -101j Disk Station.
Synology DS-101j Step 4 You will need to set up the workgr oup and code page. After going through all the steps, click Finish to apply all settings. It will take some tim e to apply settings you made.
Synology DS-101j 2. Configuration In this page you may backup the system se tting, and resto re the system setting in the future. You can backup the system conf iguration (not data; to backup data, please refer to “Backup.”) and save it as a .dss file, or you can also restore the configuration from a selected .
Synology DS-101j 3. Factory Default In this page you may replace all the system settings with factory default settings. However, you can choose if you want to keep the current settings or restore back to the original factory setti ngs when formatting the HDD.
Synology DS-101j 4. Update By connecting to Synology Website, you can check if the current firmware is the updated one; if it’s not, you can also link to Synology Website to download the latest version and update it from this page. To update the firmware of the DS-101j Disk Station, please perform the following steps.
Synology DS-101j 5. Backup This page allows the DS-101j Disk Station’ s data to be backed up to an attached USB HDD. Backing up data is important in the event that the DS-101j Disk Station is being damaged. Without b acki ng up, you will have the risk of losing data if a catastrophe happens.
Synology DS-101j After the USB HDD is formatted for data backup, you will see the page below. You can select shares you want to backup first and then choose whether to backup immediately, or to set a time so that th e data will be backed u p according to a schedule.
Synology DS-101j 4.5 Device (USB Settings) 1. USB Disk An attached USB disk can be configured as an additional shared f older. If the USB disk is setup as a backup disk, it cannot be shareable and accessible. As a USB backup disk, the DS-101j Disk Station will format the attached USB disk.
Synology DS-101j Connecting USB disks to DS-101j Disk St ation will enlarge th e capacity of the DS-101j Disk Station. The data on the USB di sk can be shared if the name of the data starts with “usbshare.” This sha r e will be removed automatically when the USB disk is ejected from the system.
Synology DS-101j 2. USB Printer You may see this page before you plug in your USB printer. An USB printer can be used if you connect it with a hub. For more instructions for using a USB shared printer, please go on to the next page.
Synology DS-101j By connecting a USB printer to DS-101j Disk Station, you will be able to share the USB printer through the network. Clic k Refresh button and USB printer status will become active as shown in the p age below. Refresh the USB printer status Click Refresh for updated status of the USB printer.
Synology DS-101j Steps for setting up US B printer in Windows 1. Open Computers Near Me in My Network Places and double click on your DS- 101j Disk Station. 2. Double click on usbprinter ; the system will prompt you to install a co rrect driver. 3. Click Finish when the setup is done.
Synology DS-101j Steps for setting up USB printer in Mac OS 10.2.X running AppleTalk Warning: For Mac users, DS-101j Di sk Station only supports USB printers with PostScript.
Synology DS-101j 2. Find Print Center and double click on it to open a dialog box. 3. Select Add to set up a new printer. 82.
Synology DS-101j 4. Select the correct server a nd choose the type AppleTalk. 5. Select Generic for Printer Model. 83.
Synology DS-101j 6. Click Add to finish. 84.
Synology DS-101j Steps for setting up USB printer in Mac OS 10.2.X running TCP/IP 1. Follow the path as Go / Application s / Utilities . 85.
Synology DS-101j 2. Find Print Center and double click on it to open a dialog box. 3. Select Add for setting up a new printer. 4. Choose the type IP printing .
Synology DS-101j 5. Enter the printer’s address. 6. Uncheck Use default queue on server , and enter ‘ usbprinter ’ for Queue Name. 7. Select Generic for Printer Model.
Synology DS-101j Steps for setting up USB printer in Mac OS 10.3.X running AppleTalk 1. Follow the path as Go / Application s / Utilities . 88.
Synology DS-101j 89.
Synology DS-101j 2. Find the Printer Setup Utility , and click it to open a dialog box. 3. Select Add for setting up a new printer. 90.
Synology DS-101j 4. Choose AppleTalk . 5. Select the correct server. 6. Select Generic for Printer Model. 7. Click Add to finish. 91.
Synology DS-101j Steps for setting up USB printer in Mac OS 10.3.X running TCP/IP 1. Follow the path as Go / Application s / Utilities . 92.
Synology DS-101j 2. Find Printer Setup Utility , and click it to op en a dialog box. 3. Select Add for setting up a new printer. 4. Choose IP Printing .
Synology DS-101j 5. Select LPD/LPR for Printer Type. 6. Enter the printer’s address. 7. Enter ‘ usbprinter ’ for Queue Name. 8. Select Generic for Printer Model.
Synology DS-101j Steps for setting up USB printe r in Mac OS 9 running AppleTalk 1. Click on Chooser . 2. Under the LaserWriter 8 , click the server. 3.
Synology DS-101j 4. Finish. 96.
Synology DS-101j Steps for setting up USB printe r in Mac OS 9 running TCP/IP 1. Launch Desktop Printer Utility . 2. Select Printer (LPR) and click OK .
Synology DS-101j 3. In the LPR section, click Change to bring up the Inte rnet Printer window. 4. Enter the IP address or its domain name of DS-101j Disk Station. 5. Enter usbprinter for Queue Name. 6. Click on Verify to make sure the printer was found.
Synology DS-101j 8. Go to File menu and select Save . 9. Enter a name and location f or th e desktop printer icon and click OK . The default name is the printer’s IP address, and the default location is at the desktop.
Synology DS-101j 10. Finish. 100.
Synology DS-101j 3. USBCopy By connecting a USB device to the front panel USB port of the DS-101j Disk Station, all data can be copied to the in ternal hard disk by pressing the USBCOPY button on the front panel of the DS-101j Disk Station. You can choose a share folder for storing data copied from the USB device here.
Synology DS-101j To access the data you copied from your US B device, please follow the instructions below. Step 1 Go to My Network Places . Step 2 Double click on Computers Near Me . Step 3 Double click on your system na me of DS-101j Disk Station. Step 4 Double click on the specified share.
Synology DS-101j Step 5 Double click on USBCopy . Step 6 You will see the folders named by the da te and time the Copy button on the front panel was pressed.
Synology DS-101j Chapter 5 Use Data Replicator Having data backed up is one of the methods to ensure data completeness. However, people are often too busy to do backup regularly.
Synology DS-101j 5.1 Before You Begin 1. Install DS-101j Disk Station Before using Data Replicator, you must make sure the following thing: Your computer and DS-101j Disk Sta tion have the same encoding setting.
Synology DS-101j If the window above didn’t appear, please go to Start on the left botto m of the screen and select Run. Enter D:autorunmenu.exe (where D is the letter of your CD-ROM drive) in the Open: box and click OK. The auto-run menu should appear.
Synology DS-101j 5.2 Use Data Replicator 1. Backup Windows clients’ data to DS-101j Disk Station 1.1 Uploading A. All files At the first time running Data Replicator, you need to backup a ll the files in the selected folders to DS-101j Disk Stat ion.
Synology DS-101j b. Select which DS-101j Disk Station you want to backup the file to. And click OK . c. Check the folders you want to backup and monitor in the “ Source ” list, an d click “ Upload ” to go on.
Synology DS-101j d. Make sure the “ All Files ” option is selected, and click “ OK ” to start the upload. If this file version has a special repr esentative meaning, you can select the option .
Synology DS-101j C. Modified files since a designated time If for personal reason you have to upload f iles modified after a specified tim e, select the “ Modified files since a designated time ” and click “ OK .
Synology DS-101j 1.2 Monitoring After first-time backup, you can continue monitoring the folders in your com puter. Any changes made to the files in th e folders will be uploaded to the DS-101j Disk Station automatically.
Synology DS-101j 2. Restore data to your computer 2.1 Select the “ Restore ” tab. 2.2 Select the destination where the fi le will be restored to in the “ Restore to ” section. 2.3 Select files or folders you want to restore, and click the “ Restore ” button, or right-click the files or folders and select “ Restore .
Synology DS-101j 2.4 Choose which file version or tag to restore. Please refer to “ 3. Tag Management ” for the usage of “ tags .” 1. If you restore the files one by one, you can only choose which file version to restore.
Synology DS-101j 3. Tag Management Data Replicator allows you to create tags up to 20. The purpose of creating a tag is to keep “the status of all files and folder on the DS-101j Disk Station at a specific time” on record. For example, if a software engineer has already com pleted program version 1.
Synology DS-101j For example, if there are “file A” and “file B” on DS-101j Disk Station at the time you create “tag 22 222” by uploading “file 1” and “file 2,” then “tag 22222.
Synology DS-101j 4. Click “ OK ” to finish. 116.
Synology DS-101j 4. Preferences 4.1 Files Uploading A. Upload before monitoring. When this option is checked, each tim e “Monitor” is executed, the program will check if there are files th at have no t been uploaded. If there are, the sy stem will automatically upload these files.
Synology DS-101j 4.2 File Copy A. Copy with compression In order to save storage space, when this option is enabled, the program will compress all backup files stored on the DS-101j Disk Station.
Synology DS-101j Chapter 6 T r oubleshootin g Here we have listed a few questions you might have when operating the Synology DS- 101j Disk S tation, and we have listed some possible solutions to each question. 1. The DS-101j Disk Station does not w ork after the HDD was installed.
Synology DS-101j The USB device is not defective. Change for another one if it’s defective. Your USB device is not connected through a USB hub device. Change for another USB device. The DS-101j Disk Station doesn’t support USB storage devices through a USB hub.
Synology DS-101j 7. I can’t find DS-101j Disk Station on my computer. Check Solution If you’ve unblocked DSAssistant in the firewall on your computer that is running Windows XP or protected by anti- virus programs. Click unblock button when the security alert message pops out.
Synology DS-101j Appendix A Suggested Periphery Suggested HDD Brand Model Size Seagate ST3200822A 200GB Samsung SV1604N 160GB Samsung SV1203N 120GB Hitachi IC35L180AVV207-1 185GB Hitachi HDS722525VLAT.
Synology DS-101j Appendix B T echnical Support 1. Hardware Problem If you need any assistance on hardware, please contact your local authorized Synology dealer or the suppliers. 2. Firmware Update If you need to upgrade your system, please visit www.synology.
An important point after buying a device Synology DS2.0 Ver. 2.0240 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Synology DS2.0 Ver. 2.0240 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Synology DS2.0 Ver. 2.0240 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Synology DS2.0 Ver. 2.0240 you will learn all the available features of the product, as well as information on its operation. The information that you get Synology DS2.0 Ver. 2.0240 will certainly help you make a decision on the purchase.
If you already are a holder of Synology DS2.0 Ver. 2.0240, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Synology DS2.0 Ver. 2.0240.
However, one of the most important roles played by the user manual is to help in solving problems with Synology DS2.0 Ver. 2.0240. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Synology DS2.0 Ver. 2.0240 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
