Instruction/ maintenance manual of the product ZEKTOR MAS3 Symphonic
Go to page of 16
ZEKTOR MAS3 Multi-channel Audio Switch Owner’s Manual www.zektor.com Rev: 2 03/12/04 TM.
2 Important Safety Instructions! Read all instructions for prior to installation of your product. Retain this User's Manua l fo r future refere nce. Adhere to all safety and operat ion instructions. Before cleaning this prod uct, unplug from the wa ll outlet.
3 A MAS3 Overview Operating the MAS3 is straig ht forward and simply a matter o f plugging th e MAS3’s po wer supply into an available A.C. outlet, and then plugging th e MAS3’s power supply into the back of the MAS3. To operate the MAS3 manually, press the power swit ch, located on th e very left of the MAS3 to cy - cle power.
4 12 3 4 5 6 7 89 0 PIP ENT TV VCR CBL / SA T DVD RCVR POWER VOL CH + + __ Using the MAS3 with a Remote Control Remote operations of the MAS3 ar e accomplished th ro ugh the use of just abo ut any re mote control.
5 Programming your Remote Control Setting up your Universal Remote Control For remote control oper ations, the MAS3 requires eithe r a Universal Remote control to be pro - grammed as one o f eight pre-progra mmed devices, or alter natively, the MAS3 can be taugh t to use most existing remote controls.
6 Using Different Remote Codes Using Alternate Compon ent Keys on your Remote The MAS3 will also respond to alte rnate component key codes. Allo wing you to use an unused TV, VCR, RCVR or one of the added AUX positions many re motes include. Setting up the MAS3 to respond to alte rnate comp onent codes is a two step process.
7 S TEP 1 1 Place the MAS3 in standby m ode. This is th e factory default mo de on power up, and if it has not been changed, you can unplug the MAS3 and plug it back in and it will power up in standby mode (at this point on ly the powe r indicator light is lit and glowing RED).
8 Learning New Remote Codes Teaching the MAS3 to us e new remote control keys If your remote does not have one of the pre-pr ogrammed componen t codes, or you simply want to re-map the MAS3 functions to ot her keys on your rem ote, the MAS3 can be taugh t to use new keys.
9 S TEP 4 4 The Power indicator blinks slow ly, and input 2 is selected. Press the key on your remote th at you want to use as the new key for S ELECT I N 2 . 1 BLINK S TEP 5 5 The Power indicator blinks slow ly, and input 3 is selected. Press the key on your remote th at you want to use as the new key for S ELECT I N 3 .
10 S TEP 11 11 After a pause, the Power indicator blinks 7 tim es, and repeats. Press the key on your remote th at you want to use as the new key for P OWER OFF . 7 BLINKS S TEP 12 12 The MAS3 will return to the standb y mode indicating a return to normal operations.
11 Bright / Dim / Auto-dimming Modes Setting the Display intens ity modes of the MAS3 The front panel disp lay of the MAS3 can be se t to Bright, Dim or an Auto-d imming mode where the display brightens for 4 seconds after an y function is selected and then auto-dims.
12 Setting Power On Defaults The MAS3 power on default mode When toggling between Standby mode and Po werOn the MAS 3 will remember all it’s current set - tings.
13 Restoring the MAS3 to Factory Defaults Restoring the MAS3 to the factory defaults There are many ways to program the MAS3’s re mote capabilities. Most learning modes require the MAS3 to be in standby mode before learn ing can begin.
14 Typical Application L SUB L R CENTER R DC input OUT 3 2 1 L SUB L R CENTER R L SUB L R CENTER R L SUB L R CENTER R SACD player DVD-A Player SACD Player # 2.
15 Warranty Information Warranty Policy ZEKTOR, LLC warrants this product against defects in material a nd workmanship u nder normal u se and service for one year from the original date of purcha se. ZEKTOR, at its option, shall repair or replace the defective un it covered by this warranty.
16 Customer Service Contact Information: ZEKTOR, LLC 12675 Danielso n Court Suite 401 Poway, CA 92064 Email: customerservic e@zektor.com.
An important point after buying a device Symphonic ZEKTOR MAS3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Symphonic ZEKTOR MAS3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Symphonic ZEKTOR MAS3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Symphonic ZEKTOR MAS3 you will learn all the available features of the product, as well as information on its operation. The information that you get Symphonic ZEKTOR MAS3 will certainly help you make a decision on the purchase.
If you already are a holder of Symphonic ZEKTOR MAS3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Symphonic ZEKTOR MAS3.
However, one of the most important roles played by the user manual is to help in solving problems with Symphonic ZEKTOR MAS3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Symphonic ZEKTOR MAS3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
