Instruction/ maintenance manual of the product 1-PortPower-over-Ethernet Symbol Technologies
Go to page of 2
T o the Installer This guide is intended for th e technician responsib le for installing t he Symbol Power Injector . It assumes the technician is familiar with basic Ethernet LAN-based networking and device installation concepts. This guide provides spec ifications, procedures and guidelines to use during the installation process.
(8) (10) (12) (14) (7) (9) (11) (13) Ensure the cable length from the Ethernet source (host) to the Po wer Injector and Symbol device receiving converged power and Ethernet does not exceed 100 meters (333 ft). The Power Injector has no On/Off power switch .
An important point after buying a device Symbol Technologies 1-PortPower-over-Ethernet (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Symbol Technologies 1-PortPower-over-Ethernet yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Symbol Technologies 1-PortPower-over-Ethernet - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Symbol Technologies 1-PortPower-over-Ethernet you will learn all the available features of the product, as well as information on its operation. The information that you get Symbol Technologies 1-PortPower-over-Ethernet will certainly help you make a decision on the purchase.
If you already are a holder of Symbol Technologies 1-PortPower-over-Ethernet, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Symbol Technologies 1-PortPower-over-Ethernet.
However, one of the most important roles played by the user manual is to help in solving problems with Symbol Technologies 1-PortPower-over-Ethernet. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Symbol Technologies 1-PortPower-over-Ethernet along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
