Instruction/ maintenance manual of the product MC70 Symbol
Go to page of 166
User Guide MC70 Enterprise Digital Assistant.
.
MC70 User Guide 72E-71769-01 Revision B August 2006.
ii MC70 User Guide © 2006 by Symbol T echnologies, Inc. All righ ts reserved. No part of this publicatio n may be reproduced or used in any form, or by any electrica l or mechanica l means, without permission in writing from Symbol.
iii Revision History Changes to the original manual are listed below: Change Date Description A 1/2006 Initial release. B 8/2006 Add Revision History page. Chapter 2: Add vibrator feature information. Remove Green and Red Phone button remappi ng information.
iv MC70 User Guide.
T able of Contents Patents .................................................... .......................................... .......................... ... ii Revision History ................................................ ............................
vi MC70 User Guide Turning Off the WLAN Radio ..................................................... ....................... 1-12 Turning Off the Bluetooth a nd WAN Radios ................................................... .. 1-13 Chapter 2: Using the MC70 Introduction .
Table of Contents - vii Modes .................................................... .......................................... ........................... .. 3-4 Wizard Mode .................................... .........................................
viii MC70 User Guide Taking Notes .......................................................................................... ....................... 4-5 Using Speed Dial .................................................................................
Table of Contents - ix Magnetic Stripe Reader (MSR) ............................................. ........................................ 5-12 Attaching and Removing the MSR .......................................................................... 5-12 Using the MSR .
x MC70 User Guide.
About This Guide About This Guide Introduction This guide provide s info rm a tio n abou t us ing the MC70 Enter pri se Digital Assistant (EDA) and acc es sor ie s. Documentation Set The document ation set for the MC70 provides info rmation for specific user need s, and inc ludes: • Microsof t ® Windows Mobile 5.
xii MC70 User Guide Configurations This guide covers the following configurations: • MC7004 - Win dows ® Mobile 5.0 Operating System; EDGE GPRS quad-ba nd W AN radio; Bluetooth ® wireless technology (Class II); QVGA 3.
About This Guide xiii Chapter Descriptions T opics covered in this guide are as follows: • Chapter 1, Getting St arted provide s information on getting the ED A up and running for the first time.
xiv MC70 User Guide Related Documents • MC70 Quick S t art Guide , p/n 72-71770-xx • MC70 Microsof t Mobile 5.0 Regulatory Information , p/n 72 -71767-xx • MC70 Integrator Guide , p/n 72E-7176 8 -xx • Microsof t ® Applications for Mobile and CE 5.
About This Guide xv Asia/Pacific Symbol T echnologies Asia, Inc. (Singapore Branch) 230 Vi ctoria S treet #12-06/10 Bugis Junction Office T o wer Singapore 18802 4 T el: +65-6796-9600 Fax: +65-6337- 6488 Australia Symbol T echnologies Pty . Ltd. 432 S t.
xvi MC70 User Guide If you purchase d yo ur Symbol pr od u ct fro m a Symb ol Bus ine ss Par tn er , contact that Business Partn er for service. For the latest version of this guide go to: http://www .
Chapter 1 Getting Started Chapter 1 Getting Started Introduction This chapter lists the p arts and accessories for the EDA and explains how to inst all and charge the batteries, replace the strap, an d power on the EDA for the first time.
1 - 2 MC70 User Guide Figure 1-2 MC70 Rear Vi ew Unpacking Carefully remove all pr otective material from the EDA and save the sh ipping cont ainer for later storage and shipping.
Getting Started 1 - 3 Accessories T able 1-1 list s the accessories available for the MC70 EDA. T able 1-1 MC70 Accessories Accessory Description Snap-on Cables The EDA supports th e following cables: • AC line co rd (country -specific) an d power supply , charges the EDA.
1 - 4 MC70 User Guide Getting Started T o start using the EDA for the first time: • Install the main batter y and cover assembly . • Charge the ED A. • Power on the EDA. • Configure the EDA. Installing and Removing the Main Battery Installing the Main Battery Before using the EDA, inst all a lithium-ion battery .
Getting Started 1 - 5 3. With the battery cover latches open, insert the cove r , bo ttom first, then press d own on the top of the cover . Figure 1-4 Inserting th e Battery Cover 4. Close the battery cover latches on either side of the battery cover .
1 - 6 MC70 User Guide 4. Lift the top of th e battery c over and r emove. Figure 1-7 Removing the Battery Cover 5. Press the battery release latch on the bottom of the ba ttery to unlock, and lift th e battery out of the well.
Getting Started 1 - 7 The standar d cap acity ba ttery (1 900 mAh) fully char ges in less than fo ur hours. The extended cap acity ba ttery (3800 mAh) fully charg es in less than eight hours.
1 - 8 MC70 User Guide Charging T emperature Charge ba tteries in tem peratures from 0 o C to 40 o C (32°F to 104°F). Note that at temperatu res above 35 o C, charging is intelligently cont rolled by the EDA and the c harging accessory in order to ensure safe operation and optimize long -term battery life.
Getting Started 1 - 9 SIM Card GPRS phone service requires a Su bscriber Identification Module (SIM) c ard, or smar t card. Obtain this card from the phone service provider . The card fits into the EDA and can cont ain the following information: • Mobile phone service provider account det ails.
1 - 10 MC70 User Guide 7. Press the re d Power button. 8. Ta p Sta r t - Phone - Menu - Options - Network tab and verify that the se rvice provider appears in the Current netwo rk : field. 9. Make a call to verify connection. Adjusting the Handstrap The EDA handstrap is att ached to the bottom of the ba ttery cover .
Getting Started 1 - 11 Removing the Screen Protector A screen protector is appli ed to the MC70. Symbol reco mmends us ing this to minim ize wea r an d tear.
1 - 12 MC70 User Guide Changing the Power Settings T o set the EDA to turn off af ter a short period of non-use: 1. Ta p Sta r t - Settings - System tab - Power icon - Advanced ta b. 2. Select the On battery power: T urn off device if not used for check box and select a value from th e drop-down list.
Getting Started 1 - 13 T urning Off the Bluetooth and WAN Radios T o turn off the Bluetooth an d WAN radios : • T ap the Connectivity icon (on non-W AN devices) or the Antenna/Signal icon (on W AN device s) and sel e ct T urn on flight mode OR • T ap the Bluetooth icon and select Disable Bluetooth .
1 - 14 MC70 User Guide.
Chapter 2 Using the MC70 Chapter 2 Chapter 2 Using the MC 70 Introduction This chapter explains th e buttons, status icons, an d co ntrols on the EDA, and provides basic instructions for using the EDA, including powering on and resetti ng the EDA, and enterin g and capturing dat a.
2 - 2 MC70 User Guide WW AN Call missed. V o ice call. V o ice call in progress. Calls are forwarded. Call on hold. S peakerphone is on. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless of f. Antenna/signal icon: no service or sear ch ing.
Using the MC70 2 - 3 The comman d bar at th e bottom of the scr een can con tain the task tray ico ns listed in T abl e 2- 2 . Speaker Icon T o adjust the system volume using the Speaker icon in the navigation bar: 1. T ap the Speaker icon. The Vo l u m e dialog box appears.
2 - 4 MC70 User Guide Battery Icon Battery icons appear on the na vigation bar when the main battery or backup battery power falls below a predetermined level. A Battery dialog box also appears ind icating the status of the main or backup battery . Figure 2-2 Battery S tatus Dialog Box Also view the battery status using the Power window .
Using the MC70 2 - 5 WW AN Icon The WWAN ico n s indicate the status of the phone and antenna/signa l. Figure 2-4 WWANConnectivity Icon T ime Icon The Time icon displays the current time in a digital or analog format. T o change the time format, tap and hold the Tim e icon until a menu appears.
2 - 6 MC70 User Guide T o display current date, time, and appointments, t ap the Time icon to display the Time and Next Appointment dialog box. Figure 2-6 Time and Next Appointmen t Dialog Box The dialog box displays the current date and time, th e ba ttery status, and any upcom ing appointment s in the Calendar .
Using the MC70 2 - 7 E-Mail Icon The E-Mail icon notifies you when you receive incoming e-mails. Figure 2-8 New E-mail Messages Dialog Box Multiple Notifications Icon The Multiple Notifications icon appears whe n two or more message no tifications occur .
2 - 8 MC70 User Guide LED Indicators The MC70 has three L ED indicato rs. The S can/Decod e LE D indicates status for scanning. The Char ge S tatus LED indicates status for ma in battery charging. The Radio Power S tatus LED indicates radio status. T able 2-3 describes th e LED indic ations.
Using the MC70 2 - 9 Keypads The EDA of fers two modular keyp ad configurations: Numeric and QWERTY . Numeric Keypad Configuration The numeric keyp ad contains applicatio n keys, scroll keys, and function ke ys. The keypad is color-coded to indicate the alternate function key (blue) values.
2 - 10 MC70 User Guide T able 2-4 MC70 Numeric Keypad Descriptions Key Description Blue Key (lef t) Use this key to launch appli cations or access items ( shown on the keyp ad in blue). Press the Blue key once to activate this mode, followed by ano ther key .
Using the MC70 2 - 11 Alphanumeric In default st a te, produces the numeric value on the key . In Alpha sta te , produces the lower case alphabetic characters on the ke y .
2 - 12 MC70 User Guide 44 F 4 $ g h i G H I 55 F 5 % j k l J K L 66 F 6 ^ m n o M N O 77 F 7 & p q r s P Q R S 88 F 8 * t u v T U V 9 9 F 9 ( w xyzW X Y Z 00 F 1 0 ) .
Using the MC70 2 - 13 QWERTY Keypad Configuration The QWER TY keyp ad produces the 26-character alp hab et (A-Z, both lowercase a nd uppercase), numbers (0-9), and assorted char acters. The keyp ad is color-coded to indica te which modifier key to press to prod uce a particular characte r or action.
2 - 14 MC70 User Guide Orange Key (right) Accesses the secondar y layer of characters and actions (shown on the keypa d in orange). • Press the Orange key once to activate this mode tempor arily , followed by another key .
Using the MC70 2 - 15 Backlight T urns the display backlight on and off. Backspace Produces a backspac e. Enter Executes a select ed item or fu nc tion . S tar Produces an asterisk. OK Use this key in conjunction with the Blue ke y as an OK or close button.
2 - 16 MC70 User Guide Ii I = Oo O “ Pp P á ü O K Aa A # Ss S 4 Dd D 5 Ff F 6 Gg G ( Hh H ) Jj J / Kk K : Ll L ‘ BACKSP ACE Backspace Shift Shif t Zz Z 7 Xx X 8 Cc C 9 Vv V % Bb B & Nn N ! Mm M ? ,, <@ T AB T ab Back tab SP ACE S pace .
Using the MC70 2 - 17 Special Character Key T o add special characters using the MC70 áü key , type the related ch aracter first, then press the Orange + áü (P) key . Continue holding the Orange key and pressin g the áü key until the special character displays.
2 - 18 MC70 User Guide T u U y Y z Z $ / “ ( ) + ! . * @ % , # & _ ‘ ? : - T able 2-8 Special Characters (Continued) Key Special Characters.
Using the MC70 2 - 19 Function Buttons The EDA ’s buttons perfor m ce rtain func tions. Figure 2-13 Function Buttons • Power : Press the red Power button to turn the EDA screen on an d off. The EDA is in suspend mode when the screen is of f. For more information, see Powering On the EDA on p age 1-8 .
2 - 20 MC70 User Guide Using a Headset Y ou can use a stereo he adset for audio communication wh en using an audio- enabled application. T o use a headset, plug the he adset jack into the audio connec tor on the side of the EDA. Set the EDA ’s volume appropriately be fore putting the headset on.
Using the MC70 2 - 21 Linear Scanning EDAs with an integrated linear scanner have the followin g features: • Reading of a variety of ba r code sym bol og ie s, incl uding the most popular linear , postal, and 1-D code types. • Intuitive aim ing for easy point-and- shoot oper ation.
2 - 22 MC70 User Guide • Angle Scanning angle is import ant for promoting quick decodes . Wh en laser beams reflect directly back into the scanner from the bar code, this specul ar reflection can “ blind” the sc anner . T o avoid this, scan the bar code so that the beam does not bou nce dir ectly back.
Using the MC70 2 - 23 Imager Scanning 1. Ensure that a scan-enabled application is load ed on the EDA. 2. Aim the scan win dow at the bar code. Figure 2-18 Imager Scanni ng 3. Press the scan button. The red laser aiming p attern turns on to assist in aiming.
2 - 24 MC70 User Guide Figure 2-21 Pick List Mode with Multiple Bar Codes in Aiming Pattern 4. Release the scan button. Resetting the EDA There are two reset functions, war m boot and cold b oot . A warm bo ot restart s the EDA by closing all running programs.
Using the MC70 2 - 25 W aking the EDA The wakeup conditions define what actions wake u p th e EDA. These settings ar e con figur able and th e facto ry default settings shown in T able 2- 9 are subject to change/update. Locking the EDA Use the Device Lock feature to prevent use of the device .
2 - 26 MC70 User Guide T o unlock the device and free it for use, tap Unlock . Figure 2-23 Unlock Device Window Ta p Unlock on the Unlock Device window .
Chapter 3 Using Bluetooth Chapter 3 Using Bluetooth Introduction Bluetooth-equipped d evices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency ( RF) to transmit and receive dat a in the 2.4 GHz Industry Scientific an d Medica l (ISM) band (802.
3 - 2 MC70 User Guide Security The current Bluetooth specification defines security at the link level. Applicat ion-level security is not specified. This allows app lication deve lopers to de fine security mechanism s tailored to their spec ific need.
Using Bluetooth 3 - 3 Disabling Bluetooth T o disable Bluetooth, t ap Bluetooth icon - Disable Bluetooth . The Bluetooth icon changes to indicate that Bluetooth is disabled. Figure 3-1 Disable Bluetooth Enabling Bluetooth T o enable Bluetooth, t ap Bluetooth icon - Enable Bluetooth .
3 - 4 MC70 User Guide War m B o ot Performing a war m boot on the EDA r eturns Bl uetooth to the last state after initi a lization. Suspend Suspending the EDA turns of f Bluetooth. Resume When the EDA resumes, Bluetooth tu rns on if it was on prior to suspen d.
Using Bluetooth 3 - 5 3. Select an ac tion from the drop-down list. Option s include: • Explore Services on Remote Device • Pair with a Remote Device • Active Sync via Bluetooth • Browse Files.
3 - 6 MC70 User Guide 6. Select the Save As Favorite check box to save this service in the Favorite view . 7. In the Favorite Name text box, enter a name for this service that will appear in the Favorite list. 8. Ta p Next . The Connection Summary window appea rs.
Using Bluetooth 3 - 7 Y ou can also use the “tap a nd hold” tech nique to view availab le options. Scroll bars and view options are similar to those on the Wind ows deskt op.
3 - 8 MC70 User Guide 4. T ap and hold Remote Devices and select Discover Devices from the pop-up m enu . T he EDA searches for Bluetooth devices in the area. Figure 3-9 Discover Devices The discovered devices di splay in the Untrusted Devices folder .
Using Bluetooth 3 - 9 T o bond with a discovered Bluetooth device: 1. Discover remote devices. See Discovering Bluetooth Device(s) on page 3-7 . 2. In the Untrusted Devices fold er , tap and hold on a device to pair with. Figure 3-11 Pairing a Remote Device 3.
3 - 10 MC70 User Guide 6. The devices p air and the device name moves to the T rusted Devices folder . Figure 3-13 Bonded (Paired) Discovered Device Renaming a Bonded Device T o rename a bonded device: 1. Launch BT Explorer . 2. T ap and hold the device to rename.
Using Bluetooth 3 - 11 3. Select Rename in the pop- up menu. The Chan ge Device Name window appears. Figure 3-15 Change Device Name W indow 4. Enter a new name for the bonded device in the text box. T ap OK . Deleting a Bonded Device T o delete a device no longer needed: 1.
3 - 12 MC70 User Guide Accepting a Bond When a remote device want s to bond with the EDA, enter a PIN when req ue s ted to grant permission. 1. Ensure that the EDA is set to discoverable and connect able. See Bluetooth Settings on pa ge 3-25 . When prompted to bond with the remote device the PIN Cod e Request window appears.
Using Bluetooth 3 - 13 The EDA communicates with the remote de vice and lists the service s under the device name. Figure 3-19 List of Discovered Services Some examples of available services ar e: • File T ransfer Services • Dial-Up Networking Services • OBEX Object Push Services • Headset or Hands-Free Services • Serial Port Services.
3 - 14 MC70 User Guide 8. Select a folder . The contents of the folde r appear in the sub-window . Figure 3-20 Remote Device Folders 9. T ap and hold on the file. A pop-up men u appears. 10. Select the action to perform: • New - create a new file or folder on the remote device • Delete - delete the selected file on the remote device.
Using Bluetooth 3 - 15 Copying a File T o copy a file to a remote device: 1. T ap and hold on the file an d se lec t Put . The Send Local File window appears. 2. Navigate to the direc tor y to sa ve the file and select a file. 3. Ta p Open . The file copies from the EDA to the remote device.
3 - 16 MC70 User Guide Before setting up dial-up networking, obtain dial-up in formation an d other necessary setting s for the office network or ISP . T o crea te a new Blue to ot h co nn ec tio n: 1. Ensure the EDA is discoverable and connect able. See Bluetooth Settings on page 3-25 .
Using Bluetooth 3 - 17 10. In the User name: text box, enter the user na me for this connection. 11 . In the Pa ssword: text box, enter the passw ord for this connection. 12. In the Domain: text box, enter the domain fo r this connection, if required.
3 - 18 MC70 User Guide Adding a Dial-up E ntry T o add a dial-up entry: 1. In the Select Dial-up Networking En try window , tap and hold, then select Ad d E nt r y from the pop-up m enu. Figure 3-25 Add Dial-Up Entry The Add Phone Book Entry window appear s.
Using Bluetooth 3 - 19 Object Exchange Push Services Object Exchange (OBEX) is a set of pr otocols that allows sharing objects such as Cont act s or pictures using Bluetooth. T o exchange cont act information with another Bluetooth enabled device: 1. Ensure the EDA is discoverab le and conn ectable.
3 - 20 MC70 User Guide 8. Ta p . T h e Select Contact En try window appears. Figure 3-27 Select Contact Entr y Window 9. Select a cont act to send to the other device. 10. Ta p OK . 11 . Ta p OK to send the cont act to the other device a nd display a confirmation dialo g box on the other device to accept the contact.
Using Bluetooth 3 - 21 6. T ap an d hold on OBEX Object Push and select Connect . Th e OBEX Object Push window appears. Figure 3-28 OBEX Object Push Window 7. In the Action: drop-down list, select Send A Picture . 8. Ta p . T h e Send Local Picture window appears.
3 - 22 MC70 User Guide 4. Select the T rusted Dev ice s folder . 5. T ap the remote device folder . 6. T ap and hold on the remote device and select Exp lore . A headset service item appears. 7. T ap and hold on th e headset service n ame and select Connect .
Using Bluetooth 3 - 23 ActiveSync Using Serial Port Services Use the wireless Bluetooth ser ial port connection for Ac tiveSync just as you would a physica l serial cable connection. Y ou must conf igure the application that will use the connection to the correct serial port.
3 - 24 MC70 User Guide 9. Ta p OK . The mo bile comput er communi cates with th e host computer and ActiveSync initates. Personal Area Network Services Connect two or more Bluetooth devices to share files, collaborate, or pl ay multi-player games. T o establish a Personal Area Network conn ection: 1.
Using Bluetooth 3 - 25 Bluetooth Settings Use the BTExplorer Settin gs window to configure the oper ation of the BTExplorer application. T ap T ools - Settings . The BTExplorer Settings window appears. Device Info T ab Use the Device I nfo tab to configur e the EDA ’s Bluetooth connec tio n mo d es.
3 - 26 MC70 User Guide T o add a service: 1. Ta p Add . The Add Loca l Service window displays. Figure 3-35 Add Local Service Wi ndow 2. In the list, select a service to add. 3. Ta p OK . The Edit Local Service window displays for the selected service.
Using Bluetooth 3 - 27 File T ransfer Service File transfer allows ot he r Blue to ot h de vice s to browse files. Figure 3-37 File T rans fer Informa tion Window Hands-Free Service Hands-Free Service allows conn ection to hands-free device s. Figure 3-38 Hands-Fr ee Service Window Service Name Displays the na me of the ser v ice.
3 - 28 MC70 User Guide Headset Service Headset Service allows conn ection to headset devices. Figure 3-39 Headset Service Windo w OBEX Object Push Service OBEX Object Push allows othe r Blue to o th devices to pu sh contacts, business cards, pictures, appoin tments, and tasks to the EDA.
Using Bluetooth 3 - 29 Personal Area Networking Service Personal Area Networ king hosts a Personal Area Networ k which allows communicati on with other Bluetooth device s. Figure 3-41 Personal Area Networking W indow Serial Port Service Serial port allows other Bluetooth devices to access COM por t s.
3 - 30 MC70 User Guide Security T ab T o adjust the security settings for an individual service, select the Services tab first, then select the individu al service, then Propertie s . Figure 3-43 BTExplorer Settings - Security T ab Service Name Displays the na me of the service.
Using Bluetooth 3 - 31 Discovery T ab Use the Discovery tab to set and modify discovered devices. Figure 3-44 BTExplorer Setting s - Discovery T ab Virtual COM Port T ab Use the V irtual COM Port tab to select the COM port s for Bluetooth communication.
3 - 32 MC70 User Guide Miscellaneous T ab Figure 3-46 BTExplorer Settings - Miscellaneous T ab Highlight Connections Select the connection ty pe to highlight when connected. In th e Wizard Mode, the only options are Favorites or None . In t he Explorer Mode the options ar e None , T ree View Only , List V i ew Only , or Tr e e and List V iew .
Chapter 4 Using the MC7004/MC7094 Phone Chapter 4 Using the MC 7004/MC7094 Pho ne Introduction Use the MC7004 and MC7094 ph one to make phone calls, se t up speed dials, keep track of calls, and send text messag es. Y our wireless service provid er may al so provide other services such as voice mail, call forwarding, an d caller ID.
4 - 2 MC70 User Guide T o receive calls when the EDA is suspended, leave th e phone radio tu rned on and ensure the EDA is set to wake with any key . Making a Call Using the Keypad Dial phone calls from the ph one keypad using speed dial or from call history.
Using the MC7004/M C7094 Phone 4 - 3 Answering a Call A dialog box appear s on the EDA when it receives an in coming call. If the phone is s et to ring, a ring tone sounds. Answer or ignore the inco ming call. T o answer an incoming call tap Answer on the Phone - Incoming.
4 - 4 MC70 User Guide Incoming Call Features • If you receive a call wh ile in a call, tap Wai t to place the call in call waiting. • Y ou can use oth er programs on the EDA duri ng a call. T o switch back to Phone, tap Ta l k or t ap Sta r t - Phone .
Using the MC7004/M C7094 Phone 4 - 5 T a king Notes T o create a note during a call, t ap Note on the display , then enter the note. For more inform ation about creating notes see the Windows On-Device Help. T o access a note created during a call: 1.
4 - 6 MC70 User Guide Using Speed Dial Create speed dial numbe rs to dial fre quently calle d numbers wit h a single tap. Be fore creatin g a speed dial entry , ensure the phone numbe r exist s in Contacts. Adding a Speed Dial Entry T o add a speed dial entry from the phone keyp ad: 1.
Using the MC7004/M C7094 Phone 4 - 7 6. Ta p ok to add the co ntact to the sp ee d dial list . Figure 4-10 Speed Dial Cont act List 7. Ta p ok to exit the Spe ed Dial Contact List . T o add a speed dial entry from the Cont acts window: 1. Ta p Sta r t - Contacts .
4 - 8 MC70 User Guide 3. Ta p Add to Speed Dial . Figure 4-13 Speed Dial Cont act Location 4. T ap the up/d ow n ar ro ws to se lec t an av aila ble loca tio n to assig n as the ne w sp ee d dia l ent ry . The first speed dial location is reserved for voice mail.
Using the MC7004/M C7094 Phone 4 - 9 3. T ap an d hold the contact name. Figure 4-15 Speed Dial De lete Menu 4. Ta p Edit... . 5. Change the name, phone number , or location information. 6. Ta p ok . Deleting a Speed Dial Entry 1. Ta p Sta r t - Phone or press the green phone ke y on the EDA ’s keyp ad.
4 - 10 MC70 User Guide 5. Ta p Ye s to confirm permanently deleting the speed dial entry . Making a Speed Dial Call Use S peed Dial to call someone saved in the speed d ial directory . T o make a speed d ial call: 1. Ta p Sta r t - Ph one or press the green phone key on th e EDA ’s keypad.
Using the MC7004/MC7094 Phone 4 - 11 Using Call History Use Call History to call someone who wa s recently called, or recently calle d in. Call History provides the time and duration of all incoming, outgoing , an d missed calls . It also provides a summary of tota l calls an d easy access to notes taken during a call.
4 - 12 MC70 User Guide Managing Call History Change views, reset the call timer , and delete calls to manage the calls stored in Call History . Changing the Call Histo ry View 1. Ta p Sta r t - Ph one or press the green phone key on the EDA ’s keypad to displa y the Pho ne keypad.
Using the MC7004/MC7094 Phone 4 - 13 4. Select Call Timers... . Figure 4-21 Call History - Call Timers 5. Ta p Reset . (The All Calls: coun te r ca nn ot be reset.) 6. Ta p ok to exit the Call Timers window . Deleting Call History Items by Call Date 1.
4 - 14 MC70 User Guide Deleting All Call History Items 1. Ta p Sta r t - Ph one or press the green phone key on the EDA ’s keypad to displa y the Pho ne keypad. 2. From the Phone keypad, t ap Call History . 3. Ta p Menu . Figure 4-23 Call History - T ools Menu 4.
Using the MC7004/MC7094 Phone 4 - 15 3. T ap an entry in the list to see the date, time, and duration of a call. Figure 4-25 Call History - Detail 4. Ta p ok to exit.
4 - 16 MC70 User Guide Using Contacts Use Conta cts to make a call without loo k ing up or entering th e phone number . T o make a call from Con tacts: 1. Ta p Sta r t - Contacts . 2. From the cont act list, tap and hold the contact name. Figure 4-27 Contacts Menu 3.
Using the MC7004/MC7094 Phone 4 - 17 3. Ta p Hold to place the first number on hold. 4. Enter the second number and tap Ta l k . Figure 4-29 Call Conferencing - Conferencing 5. Ta p Swap to move from one call to the other . 6. Ta p End or press the red phone key on the EDA keypad to end each call.
4 - 18 MC70 User Guide 6. Ta p Menu - Co nference to place the two numbers in conference mode. Figure 4-31 Creating a Conference Call 7. Ta p End or press the red phone key on the EDA keypad to end the con ference call. T e xt Messaging Use the T ext Messages window to send and rece ive text messages to and from mobile phones.
Using the MC7004/MC7094 Phone 4 - 19 3. T ap and hold on a cont act and select Send T ext Message . Figure 4-32 T ools Menu 4. On the T ext Messages window , enter your message.
4 - 20 MC70 User Guide.
Chapter 5 Accessories Chapter 5 Accessories Introduction MC70 accessories, listed below , provide a variety of product su pport capabilities. Cables Snap one of the following cables on to t he EDA to connect an extern al device. • USB Client charge cable • RS232 charge cabl e • DEX cable • Modem inverter • Autocharge cable.
5 - 2 MC70 User Guide Headset Use the headset to communicate via V oice-Over-IP (VOIP) or for audio playback and teleph ony applications. T o connect the headset, remove the plug from the head set jack at the top of the EDA and inser t the headset connector .
Accessories 5 - 3 T o insert the MMC/SD card: 1. Power of f the EDA. 2. Remove the card cover on the side of the EDA by loosen ing the screws and lif ting the cover out of the slot. Figure 5-2 Card Cover Remo val 3. Insert the card with the card cont acts facing down and the cut corner on the right, until you feel a click.
5 - 4 MC70 User Guide Charging the EDA Battery Connect the cradle to power . Insert the ED A into the EDA slot to begin charging. Figure 5-3 EDA Battery Charging Charging the Spare Battery Figure 5-4 Spare Battery Charging NOTE Use only a S ymbol-approved power supply output rated 12 Vdc and minimum 3.
Accessories 5 - 5 Battery Charging Indicators The Single Slot USB/Serial Cradle charges the EDA ’s main battery and a sp are battery simultaneously . The EDA ’ s charge LED indicates the st atus of the battery charging in the EDA. See T a b l e 1- 2 on page 1-7 for charging status indicatio n s.
5 - 6 MC70 User Guide • Simultan eou sly charges up to four EDAs. Charging Insert the EDA into a slot to begin charging. Figure 5-5 EDA Battery Charging Battery Charging Indicators The EDA ’s cha r ge LED shows the status of the battery charging in the EDA.
Accessories 5 - 7 VCD7000 V ehicle Cradle This section describes how to use a VCD7000 vehicle cradle with the ED A. For cradle installation and communication setup pr ocedures refer to the MC70 Integrator Guide .
5 - 8 MC70 User Guide Removing the EDA T o remove the EDA, hold back the release lever on the cradle and pu ll the EDA up and out of the cradle. Figure 5-7 Removing the EDA Charging the Spare Battery Insert a sp are battery to begin charging: 1. Lift the battery rel ease lever .
Accessories 5 - 9 T o remove a spare batter y , hold back the battery releas e lever and lif t the battery from the spare battery slot. Figure 5-9 Removing t he Spare Battery Battery Charging Indicators The V ehicle Cradle charges the EDA ’ s ma in battery and a spare battery simulta neously .
5 - 10 MC70 User Guide Four Slot Spare Battery Charger This section describes how to use the Four Slo t S pare Battery Char ger to charge up to four MC70 spare batteries. MC70 Battery Shim Installation Before chargin g a spare batte ry , snap the MC70 sh im into the battery slot as shown in Figure 5-10 .
Accessories 5 - 11 Spare Battery Charging 1. Connect the charger to a power source. 2. Insert the spare ba ttery into a spare ba tter y charging well and gently press down on the battery to en sure proper cont act. Figure 5-11 Four Slot Spare Battery Charger Battery Charging Indicators The charger has an ambe r LED for each battery charging well.
5 - 12 MC70 User Guide Magnetic Stripe Reader (MSR) This section describes how to set up and use the snap-o n MSR with the EDA. The MSR snaps on to the bottom of the EDA and removes easily when not in use. When attach ed to the EDA, the MSR a llows the EDA to captur e data from ma gnetic stripe cards.
Accessories 5 - 13 Using the MSR The MSR3000 sample application illustrates how an applicat ion handles MSR input (refer to Symbol Applications User ’s Guide ). T o use the MSR: 1. Attach the MSR to the EDA. 2. Power on the EDA. 3. Install the MC70 Demo applicatio n onto the EDA.
5 - 14 MC70 User Guide Inserting the EDA into the T rigger Handle Slide the EDA into the T rigger Handle until it locks in place. The release secures the EDA to the T r igger Handle. Figure 5-14 Inserting the EDA into the T rigger Ha ndle Removing the EDA T o remove th e EDA, pr es s the rele as e do wn and pu ll th e EDA for w a rd.
Accessories 5 - 15 3. Pull the trigger on the handle. The Scan/Decode L E D lights and a be ep sounds to indicate a successful decode. Figure 5-16 Scanning with the T rigger Handle Using a Cradle T o .
5 - 16 MC70 User Guide Cables This section descri be s how to set u p and u se the ca bles . The cables are available with a variety of conne ction capabilities.
Accessories 5 - 17 Battery Charging and Operating Power The communication/charge cable s can charge the EDA battery and supply opera ting power . T o charge the EDA battery: 1. Connect the communication /charge cable power inpu t connector to the Symbol approved power source.
5 - 18 MC70 User Guide.
Chapter 6 Maintenance & T roubleshooting Chapter 6 Maintenance & Troublesho oting Introduction This chapter includes instruction s on cleaning and storing the EDA, and provides tr oublesho oting solution s for potential problems during EDA op eration.
6 - 2 MC70 User Guide T roubleshooting EDA T able 6-1 T roubleshooting the EDA Problem Cause Solution EDA does not turn on. Lithium- ion battery not charged. Charge or replace the lithium-ion batte ry in the EDA. Lithium-ion battery not installed properly .
Maintenance & Troubleshooting 6 - 3 T apping the window buttons or icons does not activate the corresponding feature . Screen is no t calibrated correctly . Re-calibrate the screen. See Calibra ting the Screen on p age 1-8 . The system is not responding.
6 - 4 MC70 User Guide Bluetooth Connection T able 6-2 T roubleshooting Bluetooth Co nnection Problem Cause Solution EDA cannot find any Bluetooth devices nearby . T oo far from other Bluetooth devices. Move closer to the other Bluetooth device(s), within a r ange of 10 meters.
Maintenance & Troubleshooting 6 - 5 Piconet (the connection between a Bluetooth master and one or more Bluetooth slaves) drops. The EDA suspends and the Bluetooth radio powe r turns of f.
6 - 6 MC70 User Guide Single Slot USB/Serial Cradle T able 6-3 T roubleshooting the Single Slo t USB/Serial Cradle Symptom Possible Cause Action LEDs do not light when EDA or spar e battery is inserted. Cradle is not receiving power . Ensu re the pow er cable is connecte d securely t o both the cradle an d to AC power .
Maintenance & Troubleshooting 6 - 7 Four Slot Ethernet Cradle T able 6-4 T roubleshooting the Four Slot Eth ernet Cradle Symptom Cause Solution Attempt by the EDA to ActiveSync failed. EDA removed from the cradle while the LED was blinking gr een.
6 - 8 MC70 User Guide V ehicle Cradle Four Slot Spare Battery Charger T able 6-5 T roubleshooting the V ehicle Cradle Symptom Possible Cause Action EDA battery charging LED does not light up. Cradle is not receiving power . Ensure the power input cable is securely conn ected to th e cradle’ s power port.
Maintenance & Troubleshooting 6 - 9 Cables Magnetic Stripe Reader T able 6-7 T roubleshooting the Ca bles Symptom Possible Cause Action EDA battery is not charging. ED A was disconn ected from AC power too soon. Connect the power cable correctly .
6 - 10 MC70 User Guide T rigger Handle During dat a communication, no dat a transmits, or transmitted dat a was incomplete. EDA detached from MSR during communications. Reatta ch EDA to MSR and retransmit. Incorrect cable configurat ion. See the system administrator .
Appendix A T echnical Specifications Chapter A Appendix A Technical Spec ifications MC70 T e chnical Specifications The following tables summarize the EDA ’s intende d operat ing environment and technical hardware sp ecifications. T able A-1 EDA T echnical Specifications Item Description Physical Chara cteristics Dimensions 6 in.
A - 2 MC70 User Guide Operating System Microsoft ® Windows Mobile™ 2005 Memory 64MB RAM/128MB ROM Interface/Communications RS-232, USB 1.1 User Environment Operating T emperature 14°F to 155°F / .
Technical Specifications A - 3 Linear 1D Scanner (SE800HP) Spe cifications Optical Resolution 0.005 in. minimum e l ement wid t h Roll +/- 30° from vertical Pitch Angle +/- 65° from normal Skew T olerance +/- 60° from normal Ambient Light Sunlight: 8,000 ft.
A - 4 MC70 User Guide MC70 Accessory Specifications T able A-2 Single Slot USB/Serial Crad le T echnical Specifications Feature Description Dimensions 4.
Technical Specifications A - 5 T able A-4 Four Slot Spare Battery Charge r T echnical Specifications Feature Description Dimensions 8.25 in. L x 6.0 in.
A - 6 MC70 User Guide.
Glossary A API. An interface by mean s of which o ne softwar e compone nt co mmunicates with or controls another. Usually used to refer to services provided by one soft ware componen t to another, usually via software interrupts o r function calls Aperture.
Glossary - 2 MC70 User Guide Bit. Binary dig it. One bit is the basic unit of bi nary inform a tion. Generally, eight consecutiv e bits compose one byte of data. The pattern of 0 and 1 values within the byte determ ines its me aning. Bits per Second (bps).
Glossary - 3 Code 93. An industr ial symbology compatible with Code 39 but of fering a full character ASCII set and a higher coding density than Code 39. Code Length. Number of data characte rs in a ba r cod e bet w ee n t he start and stop characters, not including those characters.
Glossary - 4 MC70 User Guide DTE. See Data Terminal Equipment . E EAN. European Article Nu mb e r. Th is Eur o pean /I nternatio nal ver sio n of th e UPC prov ides its own coding for mat an d symbology standards. Element dimen sions are specif ied metrically.
Glossary - 5 IEC. International Electrotechnical Commission. This internati ona l agency regulate s laser safety by sp ec ifying various laser operation classes based on po wer output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification.
Glossary - 6 MC70 User Guide K Key. A key is the specific code used by the alg o rithm to encrypt or decryp t the data. Also see, Encryption and Decrypting . L LASER. Light Amplification by Stimulated Emis sion of Radiation.T he laser is an inte nse light sour ce.
Glossary - 7 Mobile Compute r. In this text, mobile computer refers to th e Symbol Ser ies 9000 wirele ss portable computer. It ca n be set up to run as a stand-alone de vi ce, or it can be set up to communicate with a network, using wireles s radio technology.
Glossary - 8 MC70 User Guide Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approac h near 100%. PING. (Packet Internet Groper) An Internet utility used to deter mine whether a partic ular IP address is online.
Glossary - 9 Scanner. An electronic device u sed to scan bar code symbols and pr odu ce a digitized pattern that co rresponds to the bars and spaces of the symbol.
Glossary - 10 MC70 User Guide Symbol Length. Length of symbol me asured f rom the be ginning of the quiet zo ne (margin ) adjacent to the start character t o the end of the qu iet zone (m argin) adja cent to a st op chara cter. Symbology. The structural rules a nd conventions for representing da ta within a particu lar bar code type (e.
Glossary - 11 ignored, because there is no time to re transmit. If UDP is used and a reliab le delivery is required, packet sequence checking an d error notific ation mu st be written into the ap plications. UPC. Universal Product Code. A relatively comple x numeric symbology.
Glossary - 12 MC70 User Guide.
Index Numerics 1-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 A accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 auto charge cable .
Index - 2 MC70 User Guide turning on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 bonding, bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 boot cold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24, 3-3 warm .
Index - 3 ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, 2-4 bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 connectivity . .
Index - 4 MC70 User Guide key descriptions . . . . . . . . . . . . . . . . . . . . . . . . 2-13 R removing main battery . . . . . . . . . . . . . . . . . . . . . . . . 1-5 renaming bluetooth bond . . . . . . . . . . . . . . . . . . . . . 3-10 reset . .
Index - 5 wireless status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Z Zebra printer cable . . . . . . . . . . . . . . . . . . . . .
Index - 6 MC70 User Guide.
Thank you for your input—We value your comments. Tell Us What You Think... We ’d like to know what you think about this Manual. Please take a moment to fill out th is questionnai re and fax this form to: (631) 738-3318, or mail to: Symbol T echnologies, Inc.
.
.
Symbol T echnologies , Inc. One Symbol Plaz a Holtsville, New Y ork 11742-1300 http://www .symbol.com 72E-71769-01 Revision B - August 2006.
An important point after buying a device Symbol MC70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Symbol MC70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Symbol MC70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Symbol MC70 you will learn all the available features of the product, as well as information on its operation. The information that you get Symbol MC70 will certainly help you make a decision on the purchase.
If you already are a holder of Symbol MC70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Symbol MC70.
However, one of the most important roles played by the user manual is to help in solving problems with Symbol MC70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Symbol MC70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
