Instruction/ maintenance manual of the product W6313CB Sylvania
Go to page of 32
13-INCH COLOR TV/VCR W6313CB O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 01A1 1 13.Outdoor Antenna gr ounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 5 - EN 01A1 1 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
- 6 - EN 01A1 1 FEA TURES • Infrared remote control • Bilingual on screen menu displa y selectable in English or Spanish • Real time counter – This shows the elapsed record- ing or playback time in hours, minutes, and sec- onds.
- 7 - EN 01A1 1 OPERA TING CONTROLS AND FUNCTIONS - TV/VCR FR ONT P ANEL - 1 EARPHONE jack – Connects to earphones (not sup- plied) for personal listening. The size of jack is 1/8” monaural (3.5mm). 2 A UDIO input jack – Connect to the audio output jack of your audio equipment, video camera or another VCR.
- 8 - EN 01A1 1 - REAR VIEW - 28 27 ANT . 7 F .FWD button – Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button – • When setting program (for example: setting clock or timer program), press to determine your selec- tion and proceed to the next step you want to input.
- 9 - EN 01A1 1 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detach- able. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT .
- 10 - EN 01A1 1 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.
- 11 - EN 01A1 1 CLOCK SET UP (AUTO / MANUAL) Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance.
- 12 - EN 01A1 1 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “ CHANNEL SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”.
- 13 - EN 01A1 1 1 Select “ CHANNEL SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ ADD/DELETE CH ” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”.
- 14 - EN 01A1 1 TV OPERA TION W A TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
- 15 - EN 01A1 1 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 16 - EN 01A1 1 3 Select your desired item Press the PLA Y/ K or STOP/ L but- ton to point to your desired item. Then, press the F .FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically .
The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLA Y button. ALL REPEA T : Repeat playback from the beginning to the end of the tape. BLANK REPEA T : Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.
- 18 - EN 01A1 1 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .
- 19 - EN 01A1 1 STILL PICTURE Y ou can view a still picture on the TV screen during playback (the Still mode). Press the P AUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLA Y button to return to playback.
- 20 - EN 01A1 1 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel.
- 21 - EN 01A1 1 Push(es) Display Recording length 1 push (normal recording) 2 pushes 0:30 30 minutes 3 pushes 1:00 60 minutes 17 pushes 8:00 480 minutes 3 Begin O TR Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you press the REC/OTR button.
- 22 - EN 01A1 1 3 Set the channel number Press the PLA Y/ K or STOP/ L but- ton until the desired channel num- ber appears. (Example: CH61) Then, press the F .
- 23 - EN 01A1 1 TO CORRECT A PROGRAM • While setting a program; press the REW/ s but- ton to go back one step and enter the correct num- bers using the PLA Y/ K or STOP/ L button. • After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21.
- 24 - EN 01A1 1 1 Select “ W AKE UP TIMER ” Press the W AKE-UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. Press the F .FWD/ B or REW/ s button until [ON] appears. 2 Select “ TV ” or “ T APE ” Press the PLA Y/ K or STOP/ L but- ton until to point to “TV/T APE”.
- 25 - EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR.
- 26 - EN 01A1 1 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem.
- 27 - EN 01A1 1 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.119/FCC V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec.
- 28 - ES 01A1 1 1 T oma de auriculares (EARPHONE)– Para conec- tar los auriculares (no suministrados) y escuchar en pri- vado. La toma es mono y tiene un tamaño de 3,5 mm. 2 T oma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora.
- 29 - ES 01A1 1 28 27 ANT . • Púlselo para determinar los modos de ajuste desde el menúde la pantalla. • Púlselo para seleccionar un modo desde un menúpar- ticular . (Por ejemplo: IDIOMA o ADJUST DE USER) 8 Botón de grabación (REC)– Púlselo para iniciar la grabación manual.
- 30 - ES 01A1 1 CONEXIONES DE ANTENA/CABLE ANT. IN OUT ANT. Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) Antena UHF (no inclu.
- 31 - ES 01A1 1 PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.
LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: P ARTS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
An important point after buying a device Sylvania W6313CB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania W6313CB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania W6313CB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania W6313CB you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania W6313CB will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania W6313CB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania W6313CB.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania W6313CB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania W6313CB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
