Instruction/ maintenance manual of the product SRDV495 Sylvania
Go to page of 108
• Remote control (NB 118 UD) with two AA batteries • RF cable ( WPZ 0901 TM 002 )• Audio/Video cables (WPZ 0102 TM 015 or WPZ 0102 LT E 01 ) If y ou need additional operating assistance after r eading this o wner’ s manual, please call T OLL FREE : 1-800-968-3429 Befor e y ou use this unit, y ou need to complete connections.
Pr ecautions Befor e y ou star t Laser Safety 2 This unit employs a laser . Only a qualified service person should remove the co ver or attempt to ser vice this device, due to possible ey e injur y .
Befor e you start Español Changing the SETUP menu Pla ying discs VCR functions Connections Getting started Recording Editing Others Befor e y ou star t 3 Impor tant Safeguar ds 1. Read Instructions - All the saf ety and operating instructions should be read befor e the appliance is operated.
4 Pr ecautions (cont’ d) Befor e y ou star t Installation Location F or safety and optim um performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything dir ectly on top of the unit. Do not place the unit directl y on top of the TV .
5 Befor e y ou star t Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español F eatures Recording This unit is compatible with both D VD-R W , which is r ewritable, and D VD-R, which is a vailable for recording once.
6 Ta b le of contents Befor e y ou star t VCR functions . . . . . . . . . . . . . . . . . . . 50 Pla yback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Recording and One-touch timer r ecording . . . . 50 Recording . . . . . . . . .
Functional o ver view Befor e y ou star t Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 7 Front P anel ONE TOUCH DUBBING CHANNEL VCR RECORD DVD RECORD DVD -RW/-R OPEN/CLOSE PLAY REW POWER F.
Functional o ver view (cont’ d) Befor e y ou star t POWER REC SPEED AUDIO ZOOM SKIP SKIP OPEN/CLOSE T OP MENU SP ACE VCR SETUP CM SKIP TIMER PROG. RETURN 123 456 78 0 9 STOP PLA Y CH VIDEO/TV SLOW PA USE .@/: ABC DEF GHI JKL MNO PQRS REC/OTR REC MONITOR MENU/LIST CLEAR/C.
Functional o ver view (cont’ d) Befor e y ou star t Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 9 Using a rem.
10 Connection to a TV Connections DVD D VD/VCR ANTENNA IN A UDIO OUT A UDIO IN S-VIDEO A UDIO OUT DIGITAL A UDIO OUT COAXIAL COMPONENT VIDEO OUT VIDEO OUT VIDEO IN L Y IN OUT C B C R L R L R R OUT (Back of TV) Plug in the A C power cor d of this unit.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 11 Connections D VD/VCR ANTENNA IN OUT RF Cable (supplied) (Back of.
12 Connections Connection to an Audio System • Befor e changing the connections, all devices should be turned off. • Refer to each owner’ s manual for further information on other devices.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 13 Getting star ted Functional o ver view Guide to On Screen Menus The unit uses the following types of on scr een menus for most operations.
14 Getting star ted Functional o ver view (cont’ d) DISPLA Y men u First: Press DISPLA Y button to call up the displa y menu. This menu will give y ou the information on the pla ying disc . Some operations are a vailable while disc is playing. Details are on page 34 .
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 15 Getting star ted Functional o ver view (cont’ d) Front P anel Display Guide 1 . Curr ent status of the unit : Appears when disc/tape pla y is paused.
Getting star ted Channel settings 16 It is recommend that y ou preset a vailable channels in your ar ea using “Auto Preset” in the Channel Preset of the SETUP men u. Presetting channels automatically 1 Press PO WER button to turn on the unit. 2 T urn the TV on and be sur e to select the input to which the D VD/VCR is connected.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Getting star ted Channel settings (cont’ d) 17 4 Select “Manual Preset” using K / L buttons, then press ENTER button.
18 Getting star ted Setting the clock Set the clock befor e you try timer r ecor ding. If a Public Br oadcasting Station (PBS) is a vailable in your area, f ollow Auto Clock Setting below . If not, follow Manual Clock Setting on pages 19-20 . Auto Clock Setting Mak e sure • The antenna/cable TV connec- tions are cor rect.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 19 Getting star ted Setting the clock (cont’ d) Manual Clock Setting 1 Press SETUP button to dis- pla y SETUP/DISC menu.
20 Getting star ted Setting the clock (cont’ d) 7 Press K / L buttons to select AM or PM, then press ENTER button. Clock menu will appear , then the settings will be activated. Setup > Clock Clock Setting Auto Clock Setting Daylight Sa ving Time Auto ON VCR DV D 8 Press SETUP button to e xit.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 21 Getting star ted Setting the clock (cont’ d) 4 Select “Da ylight Saving Time” using K / L buttons, then press ENTER button.
22 Getting star ted Selecting the TV aspect ratio Yo u can select the TV aspect ratio to match the formats of what y ou are pla ying with the unit and your TV screen ( 4:3 standar d or 16:9 widescreen TV). “ 4:3 Letter Box” has been select- ed as the default.
23 Selecting TV ster eo or SAP Getting star ted Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Y ou can select stereo or SAP . “Stereo” has been selected as the default.
RF con verter output Getting star ted 24 Change fr om CH 3 to CH 4 Y ou can watch TV programs thr ough the tuner of the unit. (Usually channel 3 or 4 of the TV is a vailable for the RF converter setting.) Be sure to connect the unit to a TV using the RF cable .
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Changing the SETUP menu T our of the SETUP menu 25 Note : Setup • If you change a setting in SETUP menu, the information of contents sta ys on even when the po wer is s witched off.
26 Languag e settings Changing the SETUP menu 26 1 Press SETUP button to displa y SETUP/DISC menu. SETUP/DISC menu will appear . 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear . 3 Select “Pla yback” using K / L / { / B buttons, then press ENTER button.
27 Languag e settings (cont’ d) Changing the SETUP menu Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Setup >.
28 Changing the SETUP menu Displa y settings 1 Press SETUP button to displa y SETUP/DISC menu. SETUP/DISC menu will appear . 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear . 3 Select “Displa y” using K / L / { / B buttons, then press ENTER button.
29 Displa y settings (cont’ d) Changing the SETUP menu Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Setup >.
30 Changing the SETUP menu Audio settings Setup > Playbac k TV Aspect Parental Loc k Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control F ast Forward with A udio .
31 Audio settings (cont’ d) Changing the SETUP menu Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Setup > Pl.
32 Changing the SETUP menu Pa r ental contr ol settings 1 Press SETUP button to displa y SETUP/DISC menu. SETUP/DISC menu will appear . 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear . 3 Select “Pla yback” using K / L / { / B buttons, then press ENTER button.
33 Pa r ental contr ol settings (cont’ d) Changing the SETUP menu Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español.
34 Information on D VD pla y Pla ying discs Befor e you attempt to pla y D VD discs, read the follo wing information. Pla yable discs This unit is compatible with following discs. To pla y a D VD , make sur e that it meets the require- ments for Region Codes and Color Systems as described below .
35 Basic pla yback Pla ying discs Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Title List •F or D VD-R (Video mode) and D VD-R W (Video mode) discs which are alr eady final- ized, a title list will be dis- pla yed instead of thumbnails.
36 Basic pla yback (cont’ d) Pla ying discs 36 1 In stop mode, press T OP MENU button to bring up the MP 3 menu. •T o exit the men u, press T OP MENU button again. 2 Press K K / L L buttons to select a desired f older (gr oup) or track, then press ENTER button.
37 Basic pla yback (cont’ d) Pla ying discs Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : D VD Disc Menu • Menus vary among discs. Refer to the information accompanying the disc f or details.
38 Basic pla yback (cont’ d) Pla ying discs Note : D VD Disc Menu • The T OP MENU button will not alwa ys active with all D VDs. • Menus vary among discs. Refer to the information accompanying the disc f or details. Pla ying discs using the title menu Some D VDs ha ve a title men u, which lists the titles a vailable .
Special pla yback Pla ying discs Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 39 Resume pla y Y ou can resume pla y from wher e y ou stopped pla ying the disc last.
Special pla yback (cont’ d) Pla ying discs 40 Skipping TV commercials during pla y Y ou can skip TV commercials b y pressing CM SKIP button, so that y ou can enjo y the recorded pr o- grams with limited interruption. 1 During pla yback, press CM SKIP button.
41 Special pla yback (cont’ d) Pla ying discs Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Step b y step pla yback 1 During pla yback, press PA USE F button. Pla yback will pause and sound will be muted.
42 Special pla yback (cont’ d) Pla ying discs Note : Zoom •W hen selecting a smaller factor than the curr ent one, the zoom area will not be displa yed. •T o remov e the zoom menu, press ZOOM button again at step 1 . •T o cancel the zoom function, select x 1.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 43 Sear ch Pla ying discs Title/Chapter sear ch Using SKIP H / G buttons 1 During pla yback, press SKIP G button to skip the cur- r ent title or cha pter and mo ve to the next.
44 Sear ch (cont’ d) Pla ying discs T rack search Using SKIP H / G buttons 1 During pla yback, press SKIP G button to skip the cur- r ent track and mo ve to the next. The track will mov e forwar d one at a time. To go back to the previous track, press SKIP H button.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 45 Repeat/Random/Pr ogram pla y Pla ying discs Note : Repeat • The A-B Repeat pla yback can only be set with in the cur- r ent title (f or D VDs), or cur- r ent track (f or Audio CDs).
46 Repeat/Random/Pr ogram pla y (cont’ d) Pla ying discs Note : Pr ogr am Playback •T o erase tracks y ou selected, press CLEAR/C.RESET but- ton. •Y ou can mak e up to 50 pro- gram settings. •T o cancel pr ogram pla yback, press ST OP C button twice during program pla yback.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 47 Selecting audio and video formats Pla ying discs Note : Dual Audio Sound Tr acks • Some discs will only allow y ou to change the sound- track from the disc’ s menu.
48 Selecting audio and video formats (cont’ d) Pla ying discs Note : Subtitle • Some discs will only allow y ou to change the subtitle from the disc’ s menu.
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 49 Selecting audio and video formats (cont’ d) Pla ying discs Swi.
50 Pla yback VCR functions Recording 1 Press PO WER button on the r emote contr ol or the front panel of the unit. When you ar e playing a ta pe , turn the TV on and be sur e to select the input to which the D VD/VCR is connected. Press: 2 Insert a prerecor ded tape , then press PLA Y B button to begin pla yback.
51 Recording and One-touch timer r ecording (cont’ d) VCR functions Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español This featur e allows y ou to set the r ecording length simply by pr essing REC/O TR button on the remote control or the fr ont panel of the unit.
52 Sear ch (cont’ d) VCR functions Time sear ch Note : T ape Search • These functions are not a vail- able during recor ding. •P r ess ST OP button to stop the search. • If the end of the tape is r eached during a Sear ch, this unit will cancel the search and re wind the tape.
53 Other operations VCR functions Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español First: To cue or re view pictur e during pla yback (Picture Sear ch): Press g / h buttons during pla yback.
54 Easy D VD recor ding Recording The following will help y ou to understand easily how to recor d to D VD discs. Note: Mak e sure batteries ar e in the remote contr ol and you ha ve connected this unit to the TV correctl y .
55 Easy D VD recor ding (Cont’ d) Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Step 5 :P r ess REC/O TR TOP MENU SP ACE VCR SETUP TIMER PROG.
56 Information on D VD r ecording Recording Information This unit can recor d to D VD-R and D VD-R W discs. When recor ding, you will need to select a r ecording f ormat betw een Video mode and VR mode depend- ing on the disc format. The disc format for D VD-R is alwa ys “Video format, ” so the recording f ormat will be “Video mode”.
57 Information on D VD r ecording (cont’ d) Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Information on cop y contr ol Some satellite broadcasts include cop y-protected information.
58 Fo rmatting a disc Recording Choosing the recor ding format of a blank disc When inserting a blank disc , the unit will initialize the blank disc. After initialization, you can r ecord to the disc with the recor ding for- mat selected in SETUP menu.
59 F ormatting a disc (cont’ d) Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 6 Select “Auto Chapter” using K / L buttons, then press ENTER button. Option window will appear .
60 F ormatting a disc (cont’ d) Recording If you ar e using a D VD-R W disc, by default it will be Video mode . Y ou can change this to VR mode from SETUP men u. 1 Place D VD-R W disc into the unit. Press SETUP button to dis- pla y SETUP/DISC menu. SETUP/DISC menu will appear .
61 Basic r ecording Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Recor ding • Recording starts immediately and continues until the disc is full or you stop r ecording.
62 Basic r ecording (cont’ d) Recording Note : Sound Quality •Y ou cannot check the r ecord- ing sound quality with the Rec monitor function. Y ou can confirm the recording pic- ture quality with the r ecording speed you ha ve selected bef ore attempting to recor d to a D VD disc.
63 One-touch timer r ecording Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Automatic T urn Off • The remaining r ecording time will appear on the displa y panel during an O TR.
64 Timer r ecording Recording Y ou can program the D VD/VCR to r ecord up to 8 pr ograms, up to a y ear in advance. Daily or weekly pr o- gram recor dings are also a vailable . • Be sure to set the clock bef ore making a timer programming. • Insert a recordable disc or a videotape with a r ecording saf e- ty tab.
65 Timer r ecording (cont’ d) Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 8 Select the channel number to r ecor d using K / L buttons, then press B button.
66 Recording Timer r ecording (cont’ d) When some pro gramming hav e been made at the end time of the pro gramming currently being recor ded: A program with a lo wer pr ogram number (PR OG. 2 ) has priority . PROG. 1 PROG. 2 Actual recor ding PROG. 1 PROG.
67 Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Settings for an e xternal sour ce Connect the external source pr operly to the unit by using input jacks either LINE 2 (Fr ont) or LINE 1 (Rear).
68 Recording Settings for an e xternal sour ce (cont’ d) Befor e recor ding from an external sour ce , see the instruction for the connection on page 67 . VCR VCR D V D - RW DV D-R W VR D V D - RW DV D-R W Video D V D - R DV D-R Recording fr om an external sour ce 1.
69 Dubbing Mode Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Impor tant Y ou can copy a D VD disc to a videotape or cop y a videotape to a D VD disc . This function will be possible only if the D VD disc or the videotape is not cop y protect- ed.
70 Dubbing Mode (cont’ d) Recording 5 Select “VCR ⇒ D VD” using K / L buttons, then press ENTER button. 6 Press SETUP button to e xit SETUP menu. Mak e sure to select a r ecording speed using REC SPEED button. Press: 7-a Press PLA Y B button on the unit, and then press P A USE button at the point you wish to start recording.
71 Finalizing the discs Recording Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Finalizing • Finalizing discs in Video mode automatically cr eate title menus.
72 Setting a disc to pr otect Recording Impor tant To pre vent accidental recor ding, editing or erasing of titles, you can protect them b y going to the DISC menu and follo wing the steps bellow . 1 Press SETUP button to dis- pla y SETUP/DISC menu. SETUP/DISC menu will appear .
73 Information on disc editing Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Guide to a title list Title list allows y ou to easily check the titles r ecord- ed on the disc.
74 Information on disc editing (cont’ d) Editing Editing original titles The following items can be used to edit the original titles. •D eleting titles (Refer to page 78 ) • Deleting parts of ti.
75 Editing D VD-R W discs in Video mode Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Deleting titles When the last title in the title list in Video mode is deleted, the disc space a vailable for recording will be increased.
76 Editing D VD-R W discs in Video mode (cont’ d) Editing 7 Y ou can put title names on titles and change the title names from this menu. The names you put on the titles will be displa yed on a titlelist. First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
77 Editing D VD-R W discs in Video mode (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Markers •Y ou cannot place mark ers bey ond the length of a title .
78 Editing D VD-R W discs in VR mode (Original) Editing When a title is deleted from an original list in VR mode , the disc space a vailable for recording will be increased. First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
79 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 3 4 5 6 1 Yo u can delete part of a title , the disc space a vailable for recording will be increased.
80 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Naming Titles Y ou can put title names on titles and change the title names from this menu. The names you put on the titles will be displa yed on a titlelist. First: 1 Press SETUP button.
81 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 3 Select “Original” using { / B buttons, then press ENTER button.
82 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Setting or clearing chapter mark ers Y ou can put chapter markers in each title. Once a chapter is mark ed, you can sear ch for it using the chapter sear ch feature. Y ou can put a chapter marker anywher e you want.
83 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español <Delete>: • Y ou cannot delete the first chapter mark er of each title .
3 Select “Original” using { / B buttons, then press ENTER button. Original list will appear . 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear . 5 Select “Index Picture Set” using K / L buttons, then press ENTER button wher e y ou would lik e to capture the thumbnail imag e.
85 Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
Editing D VD-R W discs in VR mode (Original) (cont’ d) Editing 86 Y ou are allow ed to release the titles from pr otection. First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear . 2 Select “Edit” using K / L but- tons, then press ENTER but- ton.
87 Editing D VD-R W discs in VR mode (Pla ylist) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español In VR mode , ev en when a title is deleted from a Pla ylist, the original title will remain in the Original list.
88 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Deleting parts of titles Y ou can delete par t of a title . Even when a title is deleted fr om the pla ylist, the original title will r emain. First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
89 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 7 Select “Delete” using K / L buttons, then press ENTER button.
90 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Pla ylist menu will appear . 5 Select “Edit Title Name” using K / L buttons, then press ENTER button.
91 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Setting or clearing chapter mark ers POWER REC SPEED AUDIO ZOOM SKIP SKIP OPEN/CLOSE T OP MENU SP ACE VCR SETUP CM SKIP TIMER PROG.
92 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing <Delete>: • Y ou cannot delete the first chapter of each title. 7 S elect “Y es” using { / B but- tons, then press ENTER button. A chapter mark er will be added. <Add>: The chapter mark er which you selected will be deleted.
93 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 3 Select “Pla yList” using { / B buttons, then press ENTER button.
94 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Y ou can add or delete a title in the pla ylist as you pref er . Y ou can add titles to a Pla ylist up to 99 . First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
95 Editing D VD-R W discs in VR mode (Pla ylist) (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Note : Deleting Playlist •D eleting a Pla ylist will not increase the a vailable recor d- ing time on disc.
96 Editing D VD-R discs Editing Y ou can delete titles which you do not need, howe ver the disc space a vailable for recording on the disc will not be changed. First: 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button.
97 Editing D VD-R discs (cont’ d) Editing Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Y ou can name titles and change the names from this men u. The title names will be displa yed on a titlelist.
98 Tr oubleshooting Others Befor e requesting service for this unit, check the table below for a possible cause of the pr oblem you are experiencing. Some simple corrections ma y eliminate the problem and r estore pr oper operation. Symptom Remedy Po w e r The pow er does not turn on.
99 Tr oubleshooting (cont’ d) Others Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Symptom Remedy Recording/Timer r ecording/Editing The channel cannot be changed from the channel you ar e recording.
100 Others Tr oubleshooting (cont’ d) Symptom Remedy Remote control The remote contr ol does not function. • Batteries are w eak. • There ar e obstacles between the remote contr ol and the unit. • The remote contr ol is far from the unit. • There ar e no batteries in the remote contr ol.
101 Others Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Recording Err or Disc is full. Recording Err or Y ou cannot r ecord more than 99 titles on one disc. Recording Err or Y ou cannot r ecord more the 999 chapters on one disc.
102 Glossar y Others Analog audio An electrical signal that directl y r epr esents sound. Compare this to digital audio which can be an electrical signal, but is an indirect r epr esentation of sound. See also Digital audio . Aspect ratio The width of a TV scr een relative to its height.
103 Specifications Others Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español System VCR video heads Pow er requirement.
Fácil grabación de D VD Español 104 Estas instrucciones le a yudarán a entender fácilmente cómo grabar discos D VD . Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado cor rectamente esta unidad y el TV .
Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español Fácil grabación de D VD (cont.) Español 105 P aso 5 : Pr esione el bóton REC/O TR TOP MENU SP ACE VCR SETUP TIMER PROG.
Repr oducción con videograbadora Español 106 1 Presione el botón PO WER en el mando a distancia o el panel frontal de la unidad. Cuando repr oduzca una cinta, conecte el TV y asegúr ese de seleccionar la entrada donde se conecta la unidad. Presione: 2 Coloque una cinta pregraba- da y presione el botón PLA Y B para empezar la repr oduc- ción.
Grabación y grabación con temporizador de un toque (VCR) Español Changing the SETUP menu Pla ying discs VCR functions Befor e you start Connections Getting started Recording Editing Others Español 107 Nota • Para ver un canal mientras graba en otro 1 ) Mientras está grabando en la unidad, presione el botón VIDEO/TV .
1VMN20233 / E9413UD ★★★★★ Printed in China 90 Da y Full Warranty If this (product) e xperiences any f ailure due to a defect in material or workmanship within 90 da ys from the date of purchase, return it to your nearest Sears P ar ts & Repair Center , and Sears will repair it free of charge.
An important point after buying a device Sylvania SRDV495 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania SRDV495 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania SRDV495 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania SRDV495 you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania SRDV495 will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania SRDV495, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania SRDV495.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania SRDV495. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania SRDV495 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
