Instruction/ maintenance manual of the product SCR2608 Sylvania
Go to page of 19
Under Cabinet CD Clock Radio with Remote MODEL SCR2608 INSERUCTION MANUAL Operating Instructions BEFORE OPERA TION THIS PR ODUCT , READ, UNDERST AND, AND FOLLOW THESE INSTRUCTIONS.
IMPOR T ANT SAFETY INSTRUCTIONS The Lightning fl ash with arrowhead symbol, with an equilateral tr iangle is intended to alert the user of the presence of uninsulated dangerous voltage within the product’ s enclosure that may be of suf ficient magnitude to constitute a r isk of electric shock to persons.
Object and Liquid en try-Care shou ld be taken s o that objects do no t fall and liquids are not spilled into the housing. Damage Requiring Service-The appliance shou ld be serviced by qualified servi.
IMPOR T ANT INFORMA TION REQUIRED BY THE FCC Since the Compact Disc (CD) circ uitry may cause interference to other radios near by , switch this set o ff when not in use or move it away from the affected r adios. This device com plies with Part 15 of the FCC Rules.
LOCA TION OF CONTROLS 1. LCD DISPLA Y - A (for CD, CLO CK AND RADIO) 2. VOLUME DOWN 3. VOLUME UP 4. CD DRA W ER 5. REMOTE SENSO R 6. POWER ON INDI CA TOR 7. POWER/ AL ARM OFF BU TTON 8. CD DRA W ER OPEN/CLOSE BUTT ON 9. LCD DISPLA Y B (FOR TIMER) 10. MINTUE S ET BUTTON (FOR TIMER) 11.
REMOTE CONTROL 1. OPEN /CLO SE KEY 2. PLA Y/P AUSE KEY 3. F AST FOR W ARD (SKIP > >|) BUTTO N 4. VOLUME UP KEY 5. VOLUME DOW N KEY 6. REWIND (SKIP |<<) BUTTON 7. RANDOM KEY 8. MUTE KEY 9. CD/ RADIO MEMOR Y KEY (MEM) 10. SNOOZE KE Y 11. ALARM SET KEY 12.
Under Cabinet Mounting I nstructions z T ools Req uired z Drill and 1/4” Drill Bit z Ruler or T ape Mea sure z Nail or A wl z Sci ssors z Screwdriver – Ph illips z Counte rsink ( Option al) z Mask.
1 – Mounting template Parts Packed with your unit 1. Spacers (3pcs of 1/4” , 3pcs of 1/2”, 3pcs of 1”) 2. W a shers (3pcs) 3. Phil lips head s cre ws (3pcs of 2 3/4 ”, 3pcs of 1 5/8 ”) 4.
Mounting Pr ocedure Step 1 . If your cabinet does not have a overhang: a) Position template in desired location on unders ide of cabinet, flush with front edg e. b) Then tape template in pace and go to step 2. If your cabinet have overhang: a) Measure the thi ckness of the ov erhang.
Helpful Hints: On wooden cabinets you may want to mark and start the drill holes with a nail or an awl. Be sure to hold th e drill very firmly against the cabinet to reduce “walking ” of the drill bit from the markings. Using masking tape above the hole locations on inside of wooden cabin et shelf to help reduce splintering.
FULL LCD DISPLA Y UNIT POWER SUPPL Y ( Mains 120V/60Hz) Connect the power cable plug to the (120V) wall outlet. Wa r n i n g : Before using the unit. Check th at the local mains supply is compatible with the HI-FI Sys tem (120V 60Hz) Do not plug or unplug the power cable when you r hands wet.
CLOCK SETTING 1. While in the CD or Radio mode, Press “Display /AL.Set” two time to enter the tim e mode. 2. Press and hold MEMOR Y/C- ADJ button for 2 seconds, enter to hour adjustment mode( Hour will begin to flash) 3. Press SKIP >>| or SKIP |<< butto n to desired tim e.
ALARM TIME SE TTING 1. While in the CD or Radi o mode, Press “Display/AL.S et” one time to enter t he alarm time set mode. (The bell icon “ ” will appear and begin to flash) 2. Press and hold MEMOR Y/C- ADJ button for 2 seconds, enter to alarm hour ad justment mode (Alarm hour will begin to flash) 3.
TO W AKE UP TO CD: a. Power on the unit by pressing the Power/AL. off button. b. Open the CD D RA W ER and insert a CD (with t he label side facing up) into the CD compartment. c. Close the CD DRA WER. d. Power off the unit by pressing the Power/AL. off butt on.
TIMER FUNCT ION (0:01 --------19:59) 1. Continue press the HOUR SET button (T/HOUR) adj ust the hour of the time. (from 19: --to 0: --) 2. Continue press the MINUTE SET button (T/MIN) adjust the minute of the time. (from --:59 to -- : 00) 3. When the count-down time reach to zero, the sy stem will alarm for 3 minutes 4.
RADIO SECTION RADIO RECEPTION NOTE: In Radio operation mode, press Display /AL.Set button to display the clock time. 1. Pre ss Power/AL. off bu tton to turn on the unit. 2. Press RADIO button to select radio. 3. Select AM/FM band by pressing the ST OP/BAND button.
OPERA TION OF CD PLA YE R Power ON in CD mode and ind icate the to tal tracks which contain in th e disc If open the CD DRA W ER or there is n o disc inside the unit , “0 0” display will be indicated on the display . PLA Y ING A CD 1. T urn on the unit by pressing the POWER/ AL.
SKIPPING TRACKS Press during play . Backward------------SKIP |<< button Fast Forward------------ SKIP >>| button Press SKIP |<< button twice to skip to the beginning of the previous track. Press SKIP >>| button once to skip to the beginning of the next track.
TROUBLE SHOOTING GUIDE Y ou experience a problem with this unit check the chart below before calling of service. S Y M P T O M C A U S E S O L U T I O N System will Not turn on ---AC Cord not connecte.
An important point after buying a device Sylvania SCR2608 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania SCR2608 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania SCR2608 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania SCR2608 you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania SCR2608 will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania SCR2608, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania SCR2608.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania SCR2608. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania SCR2608 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
