Instruction/ maintenance manual of the product 6727DB Sylvania
Go to page of 64
27-INCH COLOR TV/D VD/VHS 6727DB O WNER’S MANU AL If you need additional oper ating assistance after reading this owner’ s manual or to order replacement accessories, please call T OLL FREE : 1-800-968-3429. Please read before using this equipment INSTRUCCIONES EN ESP AÑOL INCLUID AS.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 1B15 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/DVD/VHS, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
- 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 5 - EN 1C29 A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your TV/DVD/VHS, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
- 6 - EN 1C29 T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELEC- TRICAL SHOCK AND FIRE . . . . . . . . . . . . .5 W ARNING .
- 7 - EN 1C29 • Hi-Fi system – The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter . • Rotary 4-head Record/Pla yback System – Four heads ensure excellent picture quality and special effects playback.
- 8 - EN 1C29 DV D ¡ Dolby Digital sound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback V arious playback modes are available including still pic- tures, fast forward/reverse, slow motion and step frames.
- 9 - EN 1C29 OPERA TING CONTROLS AND FUNCTIONS 6. OPEN/CLOSE button Press to insert discs into or remove them from the tray . 7. Disc loading tray 8. DVD indicator Lights on during DVD mode. 9. SELECT button Press to change to TV/VCR mode or DVD mode.
- 10 - EN 1C29 1 ANT. L AUDIO OUT R COAXIAL 46 47 48 49 20. A UDIO L/R input jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE b utton Press to adjust the picture. 23. Number b uttons TV Mode: Press two digits to directly access the desired channel.
- 11 - EN 1C29 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustration. By using this connection you can also record scram- bled channels.
- 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/DVD/VHS channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box.
- 13 - EN 1C29 CONNECTING T O A STEREO SYSTEM (for DVD) 1 L AUDIO OUT R COAXIAL T o Right (red) and Left (white) A UDIO OUT jacks (only D VD A UDIO OUT) Stereo system T o ANALOG AUDIO INPUT jac ks NOTES: • Be sure to turn off the power to all components in the system before connecting another component.
- 14 - EN 1C29 CONNECTING TO A DOLBY DIGIT AL DECODER OR DTS DECODER (for DVD) If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround or DTS surround format, the TV/DVD/VHS outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack.
- 15 - EN 1C29 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3).
- 16 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/DVD/VHS. 1 Select “ CHANNEL SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ CHANNEL SET UP ” . Then, press the Arrow B button.
- 17 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “ AUTO CLOCK SET- TING ” . If it is not, follow “ MANUAL CLOCK SET- TING ” .
- 18 - EN 1C29 MANUAL CLOCK SETTING Make sure ... • TV/DVD/VHS power must be turned on. In the example below , the clock is to be set to: DA TE May 1st, 2001 SETTING TIME 5:40PM 1 Select “ SETTING CLOCK ” Press the SETUP button on the remote control.
- 19 - EN 1C29 TV OPERA TION DEGAUSSING Magnetism from nearby appliances might affect the color of the TV picture. If this happens, move this unit away from the appli- ance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.
- 20 - EN 1C29 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 21 - EN 1C29 V -CHIP SET UP V -CHIP enables parents to prevent their children from watching inappropriate material on TV . V -CHIP reads the ratings for programming (except for news and sports progr.
- 22 - EN 1C29 4 Select your desired item Press the Arrow K or L button to point to your desired item. Then, press the Arrow B button to select [BLOCK] or [VIEW]. • When you select the rating cate- gory and turn it [BLOCK], the higher rating will turn [BLOCK] automatically .
- 23 - EN 1C29 MTS(Multi-Channel T elevision sound)SYSTEM Y ou can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the TV/DVD/VHS tuner channel you are watching, the status shown below will appear when you press the DISPLA Y button on the remote control.
- 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VHS power must be turned on. TO SELECT HIFI MODE 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ USER ’ S SET UP ” .
- 25 - EN 1C29 VIDEO CASSETTE This TV/DVD/VHS will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VHS.
- 26 - EN 1C29 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/DVD/VHS power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically . 2 T o begin playbac k Press the PLA Y button.
- 27 - EN 1C29 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “ USER ’ S SET UP ” .
- 28 - EN 1C29 SEARCH Make sure ... • TV/DVD/VHS power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
- 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of T imer recording and OTR.
- 30 - EN 1C29 RECORDING Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This unit will ONL Y record and view the same channel.
- 31 - EN 1C29 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VHS. Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.
- 32 - EN 1C29 TIMER Y ou may set the TV/DVD/VHS to start and end a recording while you are away . Y ou can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to r ecord: DA TE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure .
- 33 - EN 1C29 T o shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 32. 3)Press the RECORD button and select the desired program using the Arrow K or L button. 4)Press the RECORD button again.
- 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “ TIMER PROGRAMMING ” is pointed. 4)Press the Arrow B button. The details of programs appear on the TV screen.
- 35 - EN 1C29 ON SCREEN DISPLA Y T o check the Counter , Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains.
– 36 – EN 01A1 1 ABOUT THE DISCS The following discs can be played back on this DVD player . This player conforms to the NTSC color system. Y ou can- not play discs recorded in other color systems such as P AL or SECAM. ¡ Some discs include region codes as shown below .
– 37 – EN 01A1 1 USING THE TITLE MENU W ith a DVD containing a title menu, you can select desired titles from the menu. 1 Press the TITLE button. ¡ The title menu will appear . 2 Select the desired title. ¡ Press the arrow buttons ( L / K / B / s ) to change the setting, and then press the ENTER button.
– 38 – EN 01A1 1 P AUSING PLA YBACK OR DISPLA YING A STILL PICTURE 1 Press the P A USE b utton during playbac k. ¡ Playback will pause, with sound muted. 2 Press the PLA Y button to resume pla yback. CD DVD Pause F Play B STEPPING THROUGH FRAMES 1 Press the P A USE/STILL b utton while play- back is paused.
– 39 – EN 01A1 1 PLA YING FROM A DESIRED TITLE OR CHAPTER Y ou can also press the SEARCH MODE button, use the numeric buttons to enter the chapter number . ¡ Perform the title search and the chapter search after setting them on the same screen at the same time.
– 40 – EN 01A1 1 REPEA T 1 Press the REPEA T button. For DVDs ¡ A single title or chapter is played back repeatedly . ¡ Pressing the REPEA T button cycles the display on the screen as follows. For audio CDs ¡ The whole disc or a single track is played back repeatedly .
– 41 – EN 01A1 1 ZOOM PLA YBACK (enlargement onscreen) Images can be enlarged four times on the screen to your taste. Press the ZOOM button during pla yback. ¡ An image will be enlarged at the center of the screen. ¡ Press the ZOOM button again, and the image will be back to the previous size.
– 42 – EN 01A1 1 SETTINGS CHANGING THE AUDIO LANGUAGE OR SOUND MODE The DVD player has a function which allows you to select the desired audio language and sound mode. For DVDs Press the A UDIO button during playbac k, and then press the A UDIO button to select the desired audio language.
– 43 – EN 01A1 1 CHANGING THE SUBTITLE LANGUAGE The DVD player has a function which allows you to select the desired language for subtitles. Press the SUBTITLE button during pla yback, and then press the SUBTITLE button to select the desired subtitle language.
– 44 – EN 01A1 1 CHANGING THE ON-SCREEN DISPLA Y DVD Play Repeat [Chapter] Title 1 Chapter 18 Time 0:17:52 -1:38:46 Bit Rate Chapter 18 / 30 Title 1 / 5 Time 1:56:38 Audio 1.English / 4 • Picture in play back Playback Setup Window Info. Window Elapsed time of the current title and Remaining time of the current title.
– 45 – EN 01A1 1 1 Press the SETUP button. ¡ The setup screen appears. 2 Press the K / L buttons to select Language, and then press the ENTER button. 3 Press the K / L buttons to select an item, and then press the ENTER button. (V oice is played back in selected language.
– 46 – EN 01A1 1 4 Press the K / L buttons to select a desired item, and then press the ENTER button. 5 Press the SETUP button. ¡ The setup mode will be canceled and the ordinary screen will appear . 1 Press the SETUP button. ¡ The setup screen will appear .
– 47 – EN 01A1 1 Down Sampling (Default : 48kHz) Set the output for the DVD recorded in PCM 96kHz (96kHz or 48kHz) 4 Press the K / L buttons to select a desired item, and then press the ENTER button.
– 48 – EN 01A1 1 CONTROL LEVELS ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back. ¡ Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.
– 49 – EN 01A1 1 1 Afar 4 7 4 7 2 Abkhazian 4 7 4 8 3 Afrikaans 4 7 5 2 4 Amharic 4 7 5 9 5 Arabic 4 7 6 4 6 Assamese 4 7 6 5 7 Aymara 4 7 7 1 8 Azerbaijani 4 7 7 2 9 Bashkir 4 8 4 7 10 Byelorussi.
– 50 – EN 01A1 1 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV/VCR TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No power .
– 51 – EN 01A1 1 CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/DVD/VHS is showing • Y ou are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected.
– 52 – EN 01A1 1 Symptom Cause Remedy No power . • Loose power plug. • Insert the power plug firmly into the wall out let. The player does not • The remote control is not aimed • Aim the remote control directly at the sensor respond to the • at the sensor on the TV/DVD.
– 53 – EN 01A1 1 EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD.
– 54 – EN 01A1 1 CR T : 27 inch in-line gun, 90 ˚ deflection tube T elevision system : NTSC-M Closed caption system : § 15.119/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec.
– 55 – EN 01A1 1 MEMO "TD370_35-55 01.5.23 11:45 AM Page 55.
– 56 – ES 1D18 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 56 P ANEL FRONT AL DEL televisor/DVD/VHS . . . . . . . . . 56 MANDO A DIST ANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 56 VIST A POSTERIOR . . . . . . . . . . . . .
– 57 – ES 1D18 23. Botones de númer os Modo del televisor: Pulse dos dígitos para tener acceso directamente al canal deseado. Recuerde pulsar "0" antes de elegir un canal de un solo dígito. Botón +100 Púlselo para seleccionar canales de televisión por cable cuyo número sea igual o superior al 100.
– 58 – ES 1D18 fuente a las tomas AUDIO L/R y VIDEO de este tele- visor/DVD/VHS. Y luego pulse el botón SELECT hasta que "VIDEO" aparezca en la pantalla.
– 59 – ES 1D18 Fabricado bajo licencia de Dolb y Laboratories. “Dolby” y el símbolo de la D doble son mar cas de fábrica de Dolby Laboratories. T rabajos confidenciales sin publicar . ©1992-1997 Dolby Labor atories, Inc. T odos los derechos reser vados .
– 60 – ES 1D18 1 Conecte el cable de alimentación a una toma de CA convencional. NOT A: Si aparecen algunos dígitos en la esquina de la pantalla, pulse el botón POWER sin des- enchufar el cable de alimentación. 2 Pulse el botón POWER para encender el televisor/DVD/VHS.
– 61 – ES 1D18 REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO P ara empezar Conecte la alimentación del televisor , amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto.
– 62 – ES 1D18 MEMO TD370UAES 01.5.23 11:47 AM Page 62.
– 63 – ES 1D18 MEMO TD370UAES 01.5.23 11:47 AM Page 63.
Printed in Malaysia 0EMN01859 TD370UA ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: P AR TS: FUNAI CORP .
An important point after buying a device Sylvania 6727DB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6727DB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6727DB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6727DB you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6727DB will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6727DB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6727DB.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6727DB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6727DB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
