Instruction/ maintenance manual of the product 6313CE Sylvania
Go to page of 32
COLOR TV/VCR 6313CE (13 inch) 6319CE (19 inch) O WNER’S MANU AL If you need additional assistance f or set-up or operating after reading owner’ s manual, please call T OLL FREE : 1-800-968-3429. Or visit our WEB SITE at http://www .SylvaniaConsumerElectr onics.
1.Read instructions - All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions - The safety and operating instructions should be retained for future reference. 3.Heed W arnings - All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 13.Outdoor Antenna grounding - If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protec- tion against voltage surges and built-up static char ges. Article 810 of the National Electrical Code, ANSI/NFP A No.
AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 5 - EN T ABLE OF CONTENTS A NOTE ABOUT RECYCLING Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wastes. C IMPORT ANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS .
Rod Antenna (Supplied with 13"model only) PA R T NO. (0EMN00673, 0EMN01599 or 0EMN01755) 2 AA Batteries Remote Control Unit PA R T NO. (N0150UD or N0107UD ) FEA TURES • Infrared remote control .
- 7 - EN OPERA TING CONTROLS AND FUNCTIONS 1 VIDEO input jack– Connect to the V ideo output jack of a video camera or VCR. 2 A UDIO input jack– Connect to the Audio output jack of an audio equipment, video camera or VCR. 3 PO WER button– Hit to turn the unit on and of f.
- 8 - EN ANT . 29 30 17 DISPLA Y button– Hit to display the counter or the current channel number and current time on the TV screen. (Refer to page 25.) 18 ST OP button– Hit to stop the tape motion. L b utton– (Remote control) • Hit to select a mode or figure from the setting menu.
- 9 - EN PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS Note to CA TV system installer: This reminder is provided to call the CA TV system installer ’ s attention to Article 820-40 of the NEC that .
- 10 - EN USING FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the AUDIO/VIDEO input jacks on the front of the unit. Connect the Audio/V ideo output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.
- 11 - EN DEGAUSSING This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by any excess magnetism which happens to get too close to the TV . This circuit is designed to operate once when the set is first plugged in.
- 12 - EN SLEEP TIMER The Sleep T imer function turns off the unit without using [POWER] after a desired period of time. NOTE: • This function does not work during Recording mode. 1 Call up “SLEEP TIMER” setting Hit [W AKE-UP/SLEEP] repeatedly so that “SLEEP TIMER” appears.
- 13 - EN 3 After scanning The tuner stops on the lowest memorized channel. NOTES: • If there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. • The unit may recognize TV channels to be CA TV channels if reception condition is poor .
- 14 - EN 6 Select the hour Press [PLA Y/ K K ] or [STOP/ L L ] until your desired hour appears. (Example: “5”, “PM”) Then hit [F .FWD/ B B ] . 7 Select the minute Press [PLA Y/ K K ] or [STOP/ L L ] until the desired minute appears. (Example: “40”) 8 Start the clock Hit [MENU] .
- 15 - EN DA YLIGHT -SA VING TIME When Daylight-Saving T ime is ON, the clock will change automatically as follows: • First Sunda y of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.
Press [PLA Y/ K K ] or [STOP/ L L ] to select a rating with sub-ratings you wish to block, then hit [F .FWD/ B B ] twice. Press [PLA Y/ K K ] or [STOP/ L L ] to select a sub-rating, then hit [F .FWD/ B B ] to set it to [BLOCK] or [VIEW]. NOTE: • The blocked sub-ratings will appear next to the rating category in the “TV RA TING” menu.
- 17 - EN VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the stop mode, hit [STOP/EJECT P P N N ] on the unit.
- 18 - EN PLA YBACK NORMAL PLA YBACK Make sure ... • The unit must be turned on. 1 Insert a prerecorded tape If the erase-prevention tab has been removed, the unit will start playback automatically . 2 To begin playback Hit [PLA Y/ K K ] . NOTE: • If any menu is activated on the screen, [PLA Y/ K K ] does not func- tion.
- 19 - EN SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Hit [MENU] . Press [PLA Y/ K K ] or [STOP/ L L ] to point to “USER’S SET UP”, then hit [F .
- 20 - EN SEARCH Make sure ... • The unit must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: • Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
- 21 - EN - 21 - EN This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.) The “–” indication will appear when the tape has rewound further than “0:00:00” on the tape counter .
- 22 - EN This function enables you to set a recording length simply by hitting [REC/OTR] on the unit. Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase-prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.
2 Select your desired pr ogram position (1 to 8) Press [PLA Y/ K K ] or [STOP/ L L ] to select the desired program position, then hit [F .FWD/ B B ] . 3 Set the channel number Press [PLA Y/ K K ] or [STOP/ L L ] until the desired channel number appears (Example: CH61), then hit [F .
- 24 - EN AUTO RETURN W ith this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically . 1 Select “USER’S SET UP” Hit [MENU] . Press [PLA Y/ K K ] or [STOP/ L L ] to point to “USER’S SET UP”, then hit [F .
- 25 - EN ON SCREEN DISPLA Y To check the Counter , Clock and Channel number on the TV screen, hit [DISPLA Y] . Each time you hit [DIS- PLA Y] , the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains.
- 26 - EN TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your unit, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem.
- 27 - EN - 27 - EN SPECIFICA TIONS CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the unit.
- 28 - ES 1 T oma de entrada VIDEO– Conectela a la toma de salida de video de su videocámara u otra videograbadora. 2 T oma de entrada A UDIO– Conectela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora. 3 Botón PO WER– Presione para encender y apa- gar la unidad.
- 29 - ES ANT . 29 30 11 Botón REC/O TR– Presione para iniciar la grabación manual. Presione repetidamente para empezar la grabación instantánea (OTR). 12 Indicador de grabación– Parpadea durante la grabación. Se enciende en el modo de espera de la grabación con temporizador .
- 30 - ES 1 Enchufe el cab le eléctrico Enchufe el cable eléctrico de la unidad en un toma- corriente de CA del hogar . NOT A: • Si aparecen números en la esquina de la pantalla, pre- sione [POWER] sin desenchufar el cable eléctrico. 2 Encienda la unidad Presione [POWER] para encender la unidad.
- 31 - ES REPRODUCCION NORMAL Asegúrese ... • La unidad debe estar encendida. 1 Inserte una cinta pregrabada. Si la lengüeta para evitar el borrado está rota, la unidad empezará a reproducir automáticamente. 2 P ara empezar a reproducir Presione [PLA Y/ K K ] .
Printed in Malaysia 1EMN20215 T5514UQ / T7514UQ ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of char ge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP .
An important point after buying a device Sylvania 6313CE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6313CE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6313CE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6313CE you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6313CE will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6313CE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6313CE.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6313CE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6313CE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
