Instruction/ maintenance manual of the product 350 SWR Sound
Go to page of 12
S WR BA SS 350 USER GUIDE S WR 8860 E. Chaparral Rd. Suite 100 Scottsdale, AZ 85250-2618 USA PHONE: (480) 596-9690 FAX: (480) 367-5262 EMAIL: custserve@fenderusa.
IMPORT ANT SAFET Y INSTRUC TIONS CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE P ARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. A. Read Instructions: All safety and operation instr uctions should be read befor e the product is operated.
S WR BA SS 350 USER GUIDE INTRODUC TION The SWR Bass 350 Bass Amplifier was designed for the player who prefers a simple and straightfor war d preamp combined with a power amp capable of delivering enough power and headroom for most live applications.
S WR BA SS 350 — SPECIFICA TIONS Note: All measurements wer e taken with a line voltage of 120V AC. All noise specifications ar e “unweighted.” All voltages and watts are “RMS.” All measur ements were taken with tone contr ols set flat, Aural Enhancer at minimum.
Note: If you want to overdrive the first TUBE stage, use an exter nal pr eamp between your instr ument and the Passive input. T o obtain optimum sound when tr ying this, make sur e the preamp clip LED is not activated. If this occurs, tur n down your Gain contr ol until the LED does not light.
AC TIVE T ONE CONTROL SEC TION BASS CONTROL The Bass Control employs a shelving type cir cuit and boosts or cuts the bass response +/–15dB, from about 30 Hz to 100 Hz. Star ting at mid-center click-position, tur ning the control counter clockwise cuts the bass response and tur ning the contr ol clockwise boosts the bass response.
The Ef fects Blend functions only when the Ef fects Loop is being used. It is activated when a 1/4" phone plug is inser ted into the Ef fects Receive jack (see the “Ef fects Loop” section for mor e infor mation). Note: Pulling the Ef fects Blend control knob outwar d defeats the inter nal limiter circuit.
REAR P ANEL FEA TURES BALANCED XLR OUT The Balanced XLR out is a tr ue electr onically balanced recor d out. The signal appearing at the XLR out is gover ned by the position of the Line/Direct switch.
SEND Run a shielded patch cord fr om the SEND jack to the INPUT of your ef fects unit. The output impedance of the Ef fects Send Jack is 100 ohms. This jack can be used as a line level output for use in conjunction with a slave power amp such as SWR’s Power 750.
Recommended SWR Speaker combinations for use with the Bass 350 include: • (2) Goliath IIIs • (2) Goliath Junior IIIs (8 ohm version) • (2) Son Of Ber thas • (1) Goliath Junior III & (1) So.
9 Aur al Enhancer Bass Frequency Lev el T reble Midrange 0 0 0 500 +15 -15 200 800 min max +15 -15 +15 -15 Aur al Enhancer Bass Frequency Lev el T reble Midrange 0 0 0 500 +15 -15 200 800 min max +15 .
BA SS 350 LIMITED W ARRANT Y The BASS 350 f r om FMIC is wa r ranted to the original consumer pu r chaser for TWO YEARS from the date of purchase, against defects in materials and workmanship and provided that it is purchased from an Authorized SWR Dealer.
An important point after buying a device SWR Sound 350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SWR Sound 350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SWR Sound 350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SWR Sound 350 you will learn all the available features of the product, as well as information on its operation. The information that you get SWR Sound 350 will certainly help you make a decision on the purchase.
If you already are a holder of SWR Sound 350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SWR Sound 350.
However, one of the most important roles played by the user manual is to help in solving problems with SWR Sound 350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SWR Sound 350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
