Instruction/ maintenance manual of the product DVR4-1000 SW242-DU2 Swann
Go to page of 24
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
An important point after buying a device Swann DVR4-1000 SW242-DU2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swann DVR4-1000 SW242-DU2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swann DVR4-1000 SW242-DU2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swann DVR4-1000 SW242-DU2 you will learn all the available features of the product, as well as information on its operation. The information that you get Swann DVR4-1000 SW242-DU2 will certainly help you make a decision on the purchase.
If you already are a holder of Swann DVR4-1000 SW242-DU2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swann DVR4-1000 SW242-DU2.
However, one of the most important roles played by the user manual is to help in solving problems with Swann DVR4-1000 SW242-DU2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swann DVR4-1000 SW242-DU2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
