Instruction/ maintenance manual of the product SI9031N Swan
Go to page of 13
.
Important safeguards 2 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only .
3 Parts and Features 1. W ater tank 2. Handle 3. Soleplate 4. Heating indicator light 5. Steam button 6. Steam button lock 7. Steam button 8. T emperature control dial 9. Power cord/Supply hose 10. Power cord 1 1. Handle Button 12. Heating indicator light (Power base) 13.
4 Fabric Setting Chart T emperature Setting Fabric SYNTHETIC WOOL SILK COTTON Linen Max Ironing Instruction Steam Selection T emperature control dial Synthetics, Silk, Nylon, Arcrylic, Acetate Wool, P.
1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied.
6 1. Check if the rating indicated in the rating plate corresponding to the main voltage in your home 2. Press handle buttons to lay handle down. Fig.1 (Note: When handle is up, the unit is shut off, it will be ON when handle is laid down.) 3. Remove any protective foil or sticker or card from the soleplate.
7 1. After power On, water tank indicator light will light up. W ater tank indicator light blinks to show that no water or not enough water is in the tank, please fill water to Max level. After filling with water , water tank indicator light will light up steadily for easy viewing of water level.
1. Connect the appliance to a suitable socket outlet. Press power switch on control panel, a Beep sound will be heard and the power indicator light lights up. It shows that the unit has been connected to the power supply .Press steam selection switch to turn off all 3 steam indicator lights ,it is ready for dry ironing.
9 How to use your steam generator Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from the hanged fabrics. (Fig.6) Press the steam button, and then will create vertical steam. This feature is especially used for removing creases from hanging clothes and curtains.
10 How to use your steam generator 1. A filter checking system is built into this appliance. It can detect the working time for the filter . Once the filter is invalid ,the filter replacement indicator light on control panel will continuously blink to indicate that the filter needs to be replaced (Fig.
11 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However , please note that the filter will not completely stop the natural process of limescales build-up.
1. Disconnect the appliance from the power supply and allow the appliance to cool down for 60 minutes at least. 2. After use, slide out the water tank and pour out all the remaining water . (Fig.16) 3. The iron should be place on the iron rest plate, and then stored.
13 Problems Iron won’t heat Droplets of water escape from the soleplate W ater tank decoration indicator light OFF All indicator light OFF Iron does not produce steam W ater tank light blinks. T wo BEEP sounds alarm when pressing the steam button. Possible causes Incorrect connection to the main socket Re-plug the unit to main socket.
An important point after buying a device Swan SI9031N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swan SI9031N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swan SI9031N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swan SI9031N you will learn all the available features of the product, as well as information on its operation. The information that you get Swan SI9031N will certainly help you make a decision on the purchase.
If you already are a holder of Swan SI9031N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swan SI9031N.
However, one of the most important roles played by the user manual is to help in solving problems with Swan SI9031N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swan SI9031N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
