Instruction/ maintenance manual of the product SI9030N Swan
Go to page of 11
Instruction Manual steam generator Model: SI9030N.
Important safeguards 2 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only .
3 Parts and Features 1. W ater tank; 2. Handle 3. Soleplate; 4. Heating indicator light 5. Steam button 6. Steam button lock 7. Steam button 8. T emperature control dial 9. Power cord/Supply hose 10. Power cord 1 1. Handle button 12. W ater tank release 13.
4 Fabric Setting Chart T emperature Setting Fabric SYNTHETIC WOOL SILK COTTON LINEN Max Ironing Instruction Steam Selection T emperature control dial Synthetics, Silk, Nylon, Arcrylic, Acetate Wool, P.
1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied.
6 1. Check if the rating indicated in the rating plate corresponds to the mains voltage in your home. 2. Press handle button to lay handle down. Fig.1 3. Remove the protective foil or sticker or card from the soleplate. 4. Fully unwind and straighten the power cord and the supply hose.
7 1. After power On, water tank indicator light will light up for easy viewing of water level. 2. W ater tank indicator light will not light up when water tank or filter are not properly installed. No steam will be produced even if steam button is pressed.
1. Connect the appliance to a suitable socket outlet. W ater tank indicator illuminates to indicate that the unit has been connected to the power supply 2. Set temp setting knob to desired position according to above ironing temperature setting guide or fabric setting chart.
9 Press down steam button lock and then push it backwards, steam button will automatically lock . Steam will be produced continually. If you want to stop steam, please push steam button lock forward.
10 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However , please note that the filter will not completely stop the natural process of limescale build-up.
11 Problems Iron won’t heat W ater tank indicator OFF and no steam Droplets of water escape from the soleplate Possible causes Incorrect connection to the main socket Re-plug the unit to main socket. T emperature control dail is set at“MIN” position.
An important point after buying a device Swan SI9030N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swan SI9030N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swan SI9030N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swan SI9030N you will learn all the available features of the product, as well as information on its operation. The information that you get Swan SI9030N will certainly help you make a decision on the purchase.
If you already are a holder of Swan SI9030N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swan SI9030N.
However, one of the most important roles played by the user manual is to help in solving problems with Swan SI9030N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swan SI9030N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
