Instruction/ maintenance manual of the product T6D Suunto
Go to page of 59
USE R GUIDE SU UNT O t6d en.
MODES & VIEWS • weekday • seconds • dual time • altitude row 1: distance row 2: speed views: • altitude • ascent • average speed • chrono • descent Time T raining display 1* row .
1 Introduction ............................................................................ 5 2 Getting started ......................................................................... 6 2.1 Basic settings ............................................
4.4 Configuring TRAINING mode displays .................................... 23 4.5 Setting reference altitude ................................................. 26 4.6 Setting heart rate limits ................................................... 27 4.7 Selecting log parameters .
7 Troubleshooting ...................................................................... 45 Pairing your transmitter belt ................................................. 45 8 Care and maintenance .....................................................
1 INTRODUCTION Thank you for choosing Suunto t6d as your training companion. Suunto t6d is a high-precision heart rate monitor designed to make your training as beneficial as possible. Suunto t6d gives you extremely accurate feedback on your fitness level.
2 GETTING STARTED 2.1 Basic settings Press any button to activate your Suunto t6d. You will be prompted to set your PERSONAL settings: your physical characteristics and activity class. The device suggests a default fitness METS level, but if you know your real fitness METS, you should use that value.
NOTE: All the PERSONAL settings can be fine tuned later. 2.2 Setting activity class The activity class ( ACT CLASS ) is a rating of your current activity level. Use the following classifications to help you determine your activity class. Activity class 1 If you do not participate regularly in recreational sports or heavy physical activity, use 1.
● 1-3 hours, use 6. ● over 3 hours, use 7. Activity classes 7.5 - 10 If you train on a regular basis or participate in competitive sports, and your weekly exercise is: ● 5-7 hours, use 7.5. ● 7-9 hours, use 8. ● 9-11 hours, use 8.5. ● 11-13 hours, use 9.
2.3 Menu navigation Access the settings menu by keeping [Mode] pressed. Scroll through the menus and sub menus with [Lap +] and [Light -]. Enter a menu and a sub menu, or accept a setting value with [Mode]. Return to the previous menu with [View Back].
2.4 Modes and views Modes There are two modes: TIME and TRAINING . Switch between modes with [Mode]. The indicators on the left-hand side of the screen show which mode is enabled. TRAINING mode has two displays, DISPLAY 1 and DISPLAY 2 . You can customize each TRAINING display.
Views Each mode has different views containing supplementary information, such as the altitude in TIME mode or calories in TRAINING mode. Go to DISPLAYS settings to define which views are shown in the TRAINING mode displays. Change views in TIME and TRAINING modes with [View Back].
When the buttons are locked, you can still change views and turn on the backlight. We recommend you lock the buttons, for example, after you have started a training session or are storing the device in a travel bag.
3 USING TIME MODE In TIME mode you can view the time of day in two time zones: the time at your actual location and in another time zone (dual time). The current date is displayed on the top row of the screen.
3.1 Setting time To set time: 1. In the settings menu, enter TIME . 2. Scroll to TIME with [Lap +] and [Light -] and enter with [Mode]. 3. Change the time with [Lap +] and [Light -] and accept with [Mode]. 4. Reset seconds with [Light -]. To set specific seconds, keep [Lap +] pressed.
NOTE: We recommend that you set the current time at your current location as the main time because the alarm clock operates according to the main time. 3.3 Setting date To set the date: 1. In the settings menu, enter TIME . 2. Scroll to DATE with [Lap +] and [Light -] and enter with [Mode].
When the alarm sounds, acknowledge it by pressing any button. If you do not acknowledge the alarm, it will automatically stop sounding after 30 seconds. TIP: You can use one alarm on workdays and the others on weekends. You can also use the extra alarms as reminders or snooze options.
4 SETTINGS BEFORE TRAINING Before you start training, you need to define PERSONAL and UNITS settings. To be able to measure your altitude, you should also set the reference altitude.
Description Value Setting Maximum heart rate according to selected units in UNITS settings 000 max hr Fitness METS value 00.0 fitness METS To change PERSONAL settings: 1. In the settings menu, enter PERSONAL . 2. Scroll through the settings with [Lap +] and [Light -] and enter with [Mode].
4.1.2 Fitness METs level Fitness METs (metabolic equivalents) value shows how much energy your body is able to consume compared to the energy consumption at rest. Roughly, the better your fitness level, the higher your maximum MET value is. Suunto t6d suggests a default fitness METS level, but if you know your real METs, you should use that value.
Description Value Setting Altitude measurement units: meters or feet m/ft alti Ascent units: meters per second, minute, or hour / feet per second, minute or hour m / s, m / min, m / h, ft / s, ft / mi.
4.3 General settings In the GENERAL settings you can set button tones and icons on or off, modify backlight settings, and pair HR belts and PODs. Define the GENERAL settings according to your own preferences.
2. Scroll to TONES with [Lap +] and [Light -]. 3. Set the tones on or off with [Mode]. 4. Press [Start Stop] to exit. 4.3.2 Setting icons When the icons are enabled and you switch to a mode, a mode icon is briefly shown on the screen before the main display opens.
● OFF : The light cannot be switched on by pressing a button or during alarm. ● NIGHT USE : The light is switched on when you press any button and stays on for a short while after the last press of a button and when an alarm sounds. NIGHT USE significantly reduces battery lifetime.
Description Content Total ascent: vertical movement upwards during training according to selected units in UNITS settings ascent Average heart rate of training session avg HR Average speed of training.
Description Content Covered distance during current lap (if paired with a wireless speed and distance POD) lap dist Average speed of current lap (if paired with a wireless speed and distance POD) lap .
TIP: If you want to disable a training display, choose EMPTY for ROW 1 and ROW 2 . 4.5 Setting reference altitude To ensure you get correct altitude readings, you first have to set an accurate reference altitude.
2. Change the value with [Lap +] and [Light -]. 3. Accept the setting with [Mode]. 4. Press [Start Stop] to exit. Possible real life situation: Using altitude measurement during training You participate in half marathon. Before you start the race you set the correct reference altitude to your Suunto t6d.
Description Value Setting Lower heart rate limit according to selected units in UNITS settings 000 / % Low To change the heart rate limit settings: 1. In the settings menu, enter TRAINING . 2. Scroll to HR LIMITS with [Lap +] and [Light -] and enter with [Mode].
4.7 Selecting log parameters Before you start recording your training sessions, select the type of data you want to save in your log or view during your workout. The parameters you select can be analyzed in more detail in the Suunto Training Manager software.
3. Scroll through the parameters with [Lap +] and [Light -] and set the parameters on or off with [Mode]. 4. Press [Start Stop] to exit. TIP: If you record altitude information during your training, you will be able to analyze the effect of altitude changes to your heart rate with the Suunto Training Manager software.
5 USING TRAINING MODE In TRAINING mode you can measure all your training activity. NOTE: Even though both Suunto t6d and the transmitter belt are water-resistant, the radio signal does not carry in water, which makes the communication between Suunto t6d and the transmitter belt impossible.
WARNING: If you have a pacemaker, defibrillator, or other implanted electronic device, you use the transmitter belt at your own risk. Before using it, we recommend an exercise test with your Suunto heat rate monitor and belt under a doctor ’ s supervision.
Countdown timer Countdown timer functions as a start timer. It measures remaining time and upon reaching zero, it alerts you when the countdown has reached zero and automatically starts the timer/log. Use the countdown timer for example to exclude the warm-up session from the training log.
5.3 Using Training Effect Training Effect (TE) is a unique feature of Suunto t6d that measures the real effect of a workout on your physical fitness. With Training Effect, you can be sure that your workouts have the intended result.
Description Result Training Effect Extremely high effect on aerobic performance if adequate recovery allowed; should not be done often. Over-reaching 5.0 NOTE: It is important to note that the numerical TE values do not mean that a workout with a lower numerical value is somehow worse or less significant than a workout with a high value.
Heart beat analysis technology producing Training Effect is provided and supported by Firstbeat Technologies Ltd. 5.4 Using EPOC EPOC (Excess Post-exercise Oxygen Consumption) indicates the amount of extra oxygen that your body needs to recover after exercise.
training session itself starts when you start the log recorder and ends when you stop it. Using log recorder By default, the log recorder ( CHRONO ) is displayed on the top row of the DISPLAY 1 . You can personalize the TRAINING mode displays in the DISPLAYS settings.
● Switch between the two TRAINING displays to view various data about your exercise. ● Set HR limits on or off by keeping [View Back] pressed in TRAINING mode. 5.7 After training 5.7.1 Viewing logbook While the log recorder is running, your Suunto t6d collects various data about the session, such as EPOC and calories burned.
To erase logbook information: 1. In LOGBOOK , scroll to ERASE with [Lap +] and [Light -] and enter with [Mode]. 2. Scroll to the log you want to erase with [Lap +] and [Light -] and select the log with [Mode]. 3. Erase the log with [Ligh -] or cancel with [View Back].
6 USING PODS You can use various Peripheral Observation Devices (PODs) with your Suunto t6d. These include Foot POD, Bike POD, Cadence POD, GPS POD and generic Speed POD (see Section 6.1 Pairing a POD ). After you have paired a POD with the device, Suunto t6d gives you additional information during your training.
6.2 Using autolap With AUTOLAP , you can define laps in distance instead of time (interval training). When autolap is turned on (and your speed and distance POD is activated), your Suunto heart rate monitor shows total distance, average lap speed, and lap time for each lap.
6.3 Using distance intervals You can set distance intervals for interval training after you have paired your Suunto t6d with a speed and distance POD. When you start the stopwatch, your Suunto t6d alerts and records lap times and other data after every completed interval.
Description Value Setting Upper speed limit 00:00 upper To set the speed limits: 1. In the settings menu, enter SPD/DST . 2. Scroll to SPD LIM with [Lap +] and [Light -] and enter with [Mode]. 3. Set the limits on or off with [Lap +] and [Light -] and accept with [Mode].
6.6 Calibrating your POD A Suunto POD that measures speed and distances needs to be calibrated to give you accurate readings. The calibration procedure differs for each POD type, and you will need to read the POD user guide to get detailed instructions.
7 TROUBLESHOOTING Suunto t6d uses coded transmission to prevent reading disturbances. However, exercising near overhead power lines or powerful magnetic / electronic devices may cause interference with the signal. If you lose the signal, try the following: ● Exit and then re-enter TRAINING mode.
The same procedure can be used if you experience problems with Suunto POD signal reception. 46.
8 CARE AND MAINTENANCE 8.1 General guidance For all Suunto Training devices: ● Only perform the procedures described in Suunto guides. ● Do not disassemble or service your device yourself. ● Protect your device from shocks, hard and sharp objects, extreme heat and prolonged exposure to direct sunlight.
8.2 Replacing wristop battery Replace the battery as illustrated here: 1 2 3 4 5 6 7 TIP: Use the Suunto battery compartment opening tool to avoid cover damage.
NOTE: Replace the battery with extreme care to ensure your Suunto heart rate monitor remains water resistant. Careless replacement may void the warranty.
9 SPECIFICATIONS 9.1 Technical data General ● Operating temperature: -20°C to +60°C / -5°F to +140°F ● Storage temperature: -30°C to +60°C / -22°F to +140°F ● Weight (device): 55 g ● Transmission frequency (belt): 2.465 GHz Suunto ANT compatible, 5.
● Lap/split times: 199 per session (log) ● Resolution: 0.1 second Heart rate ● Display: 30 to 240 ● Limits: 30 to 230 ● Maximum for percentage display: 240 9.2 Trademark Suunto and its product names, trade names, trademarks and service marks whether registered or unregistered are protected by Suunto or respective third party owners.
This document content is subject to change at any time without notice. Suunto shall not give any warranties, whether express or implied, including without limitation that this documentation is accurate, comprehensive or error-free. The latest version of this documentation can be downloaded at www.
9.7 Patent notice This product is protected by the following patents and patent applications and their corresponding national rights: US 11/432,380, US 11/169712,US 11/808,391, US 10/523,156, US 10/515,170. Additional patent applications have been filed.
10 DISCLAIMERS 10.1 User ’ s responsibility This instrument is intended for recreational use only. Suunto heart rate monitors must not be used as a substitute for obtaining measurements that require professional or laboratory-quality precision.
Index A alarm, 15 autolap, 41 autopause, 43 B backlight, 22 C calibrating PODs, 44 D distance intervals, 42 dual time, 14 E EPOC, 36 F fitness METs, 19 H heart rate limits, 27 I icons, 22 L logbook, 3.
TRAINING, 31 P pairing a POD, 40 PODs autolap, 41 autopause, 43 calibrating, 44 distance intervals, 42 pairing, 40 R reference altitude, 26 replacing belt battery, 49 wristop battery, 48 S setting ala.
Training Effect, 34 TRAINING mode displays, 23 using, 31 transmitter belt pairing, 45 putting on, 31 replacing battery, 49 V views TIME mode, 13 TRAINING mode, 23 57.
Co pyr ig ht © Su unt o Oy 4 /2 010 . Su unt o is a r eg ist er ed t ra de mar k of Su un to O y. Al l Ri ght s re se r ve d. SUUNTO HELP DESK Global +358 2 284 1160 USA (toll free) 1-800-543-9124 Canada (toll free) 1-800-267-7506 www.
An important point after buying a device Suunto T6D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Suunto T6D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Suunto T6D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Suunto T6D you will learn all the available features of the product, as well as information on its operation. The information that you get Suunto T6D will certainly help you make a decision on the purchase.
If you already are a holder of Suunto T6D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Suunto T6D.
However, one of the most important roles played by the user manual is to help in solving problems with Suunto T6D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Suunto T6D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
