Instruction/ maintenance manual of the product GVDM-26 Bard
Go to page of 7
Manual 2100-520 Page 1 of 7 USER’S GUIDE For GeoT ec (GV Series) Packaged Geothermal Heat Pump Systems Manual: 2100-520 Supersedes: NEW File: T ab 8 Date: 03-10-09 GV Series Geothermal Heat Pump s s.
Manual 2100-520 Page 2 of 7 T ABLE OF CONTENTS General Information ........................................................ Page 3 Air Filters .................................................................... Page 3 Basic Operating Principles .....
Manual 2100-520 Page 3 of 7 GENERAL INFORMA TION This manual is intended to be a general guide for care and operation of typical systems and covers the most important features you should be aware of and are responsible for as the user of the equipment.
Manual 2100-520 Page 4 of 7 2. The compressor , which is a sealed pump that moves the refrigerant through the system. 3. The water coil where the heat that was absorbed from the indoor space is discharged to the circulating water supply . A pump is required somewhere in the system to move the water through the heat pump water coil.
Manual 2100-520 Page 5 of 7 AUT OMA TIC CONTROL SYSTEMS THERMOST A TS There are many types of thermostat s available to properly control your system, and these can vary in features and some functions depending upon the type of system (air conditioner , heat pump, etc.
Manual 2100-520 Page 6 of 7 PERIODIC MAINTENANCE Periodic maintenance must be conducted on your system to ensure maximum performance, especially during peak operating periods and conditions.
Manual 2100-520 Page 7 of 7 6. Heat pumps may have the system (compressor) run continuously at lower out door temperatures, and this is normal. The heat pump (compressor) mode is controlled by the 1 st & 2 nd stage of the thermostat, and delivers the most ef ficient heat.
An important point after buying a device Bard GVDM-26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bard GVDM-26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bard GVDM-26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bard GVDM-26 you will learn all the available features of the product, as well as information on its operation. The information that you get Bard GVDM-26 will certainly help you make a decision on the purchase.
If you already are a holder of Bard GVDM-26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bard GVDM-26.
However, one of the most important roles played by the user manual is to help in solving problems with Bard GVDM-26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bard GVDM-26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
