Instruction/ maintenance manual of the product SuperChassis 832T-R760B Supermicro
Go to page of 33
1.0a ® S UPER SC832/SC833 CHASSIS USER'S GUIDE MUTE RESET ! 2 1 R.
1-2 S UPER SC832/SC833 Chassis User’s Guide The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuraci.
1-3 Chapter 1: Safety Information and Technical Specifications Table of Contents Chapter I: Safety Information and Technical Specifications .......... 1 - 4 1-1. Electrical Safety Guidelines ............................................................
1-4 S UPER SC832/SC833 Chassis User’s Guide Chapter 1-Safety Information and Technical Specifications 1- 1 Electrical Safety Guidelines Warning: To avoid electrical shock, check the power cords as follows: Checking the Power Cords z Use the exact type of power cords as required.
1-5 Chapter 1: Safety Information and Technical Specifications Use rubber mats specifically designed as electrical insulators when working with computer systems. The power supply or power cord must include a grounding plug and must be plugged into grounded outlets.
1-6 S UPER SC832/SC833 Chassis User’s Guide 1-3 ESD Safety Guidelines Use a grounded wrist strap designed to prevent static discharge. Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use. Touch a grounded metal object before removing the board from the antistatic bag.
1-7 Chapter 1: Safety Information and Technical Specifications To avoid personal injury and property damage, please carefully follow all the safety steps listed below: Before accessing the chassis: 1. Turn off all peripheral devices connected to the SC832/SC833.
1-8 S UPER SC832/SC833 Chassis User’s Guide Before installing the chassis into a rack: 1. Make sure that the rack is securely anchored onto a unmovable surface or structure before installing the chassis into the rack. 2. Unplug the power cord(s) of the rack before installing the chassis into the rack.
1-9 Chapter 1: Safety Information and Technical Specifications A. The SC832/SC833 chassis contains the following: The SC832 chassis: 1-6 Packing List and the SC832/SC833 Specifications &RPSRQHQW.
1-10 S UPER SC832/SC833 Chassis User’s Guide D. The Power Supply Specifications of the SC832/SC833 The Accessory box contains the following: C. The Rail Packaging contains the following: Rail Packaging contains: B. The Accessory Box and the Rail Packaging contain the following: Power supply spec 760W series 550W Series Mfr.
1-11 Chapter 1: Safety Information and Technical Specifications E. The Serial ATA Back Panel (*SC832/SC833T Only) E-1 Jumper Settings and Pin Definitions E-2 Jumper Setting Locations A B F E C D BUZZE.
1-12 S UPER SC832/SC833 Chassis User’s Guide F. The SCSI Back Panel (*SC832/SC833S Only) F-1 Jumper Settings and Pin Definitions F-2 Jumper Setting Locations A D C B BUZZER RESET FAN#3 JP43 FAN#2 JP.
1-13 Chapter 1: Safety Information and Technical Specifications F-3 SCSI (Super) GEM Driver Installation (*for Windows OS) (*Note: This driver is not necessary for other Operating Systems. If you have two SCA backplanes, you will need to install the driver twice.
1-14 S UPER SC832/SC833 Chassis User’s Guide Notes.
2-1 Chapter 2: Chassis Description and Installation Instructions 2-1 Chassis Description A. Contents of the Accessory Kit: The following items are included in the Accessory Kit: Chapter 2: Chassis Description and Installation Instructions G H F F. Flat head M4 x 4 mm [0.
2-2 S UPER SC832/SC833 Chassis User’s Guide MUTE RESET ! 2 1 R B. Chassis Front View and the Front Control Panel LED Panel LED Button Definitions L. System Alert/Power Failure K. Overheat J. LAN2 I. LAN1 H. HDD Activity G. Power Indicator F. Alarm Reset (*Note) E.
2-3 Chapter 2: Chassis Description and Installation Instructions LED Button Descriptions /('%XWWRQ &RORU &RQGLWLRQ 'HVFULSWLRQ *UHHQ 2Q 6VWHP2Q 3RZHU .
2-4 S UPER SC832/SC833 Chassis User’s Guide C. Chassis Rear View and the Back Panel *I/O Back Panel Back Panel I/O Port Definitions E. Keyboard & Mouse SC832/SC833 Chassis Rear View Back Panel Devices A. Power Supply Modules (3) (*760W only) B. Back Panel I/O Ports C.
2-5 Chapter 2: Chassis Description and Installation Instructions Power Module LED Descriptions &RORU&RQGLWLRQ 'HVFULSWLRQ *UHHQ 3RZHU6XSSO'&2Q $PEHU.
2-6 S UPER SC832/SC833 Chassis User’s Guide B. Tools needed 2-2 Chassis Installation A. Important Safety Guidelines Stop This product shall only be accessed, assembled and serviced by technically qualified personnel or technicians.
2-7 Chapter 2: Chassis Description and Installation Instructions C. Accessing the SCA Drive Tray and Installing a HDD To install the SCA drive into the chassis, you need to first remove the SCA drive tray from the chassis.
2-8 S UPER SC832/SC833 Chassis User’s Guide D. Removing the Top Cover of the SC832/SC833 Chassis Before installing any components, replacing chassis fans or accessing the motherboard, you will first need to remove the top cover. Procedures 1. Press the release tabs to release the cover from its locking position.
2-9 Chapter 2: Chassis Description and Installation Instructions E. Accessing the Front Chassis Fans Procedures 1. Press the release tab located on the left side of the front chassis fan (when facing the front side of the fan) to release the chassis fan from its locking position as shown in the picture below: 2.
2-10 S UPER SC832/SC833 Chassis User’s Guide F-1. Accessing the 760W Power Supply (*For Triple Redundant Power Supply-3xPWS-0050M) Procedures 1. Locate the release tab on the left side of the power supply. 2. Push the release tab to the right to release the power supply from its locking position as shown below: 3.
2-11 Chapter 2: Chassis Description and Installation Instructions F-2. Accessing the 550W-Power Supply (*For Single PWS-0047) Procedures 1. Unscrew the screws to remove the metal plate.
2-12 S UPER SC832/SC833 Chassis User’s Guide ! Warning: For proper cooling, please be sure to install the air shroud and all the chassis covers before you operate the system. G. Installing the Air Shrouds AAa The SC832/833 chassis and the locations of the Large and Small Air Shrouds A B C D E E A.
2-13 Chapter 2: Chassis Description and Installation Instructions Procedures 2. Locate the six tabs (labelled J, K, L, M, N, and O) on the Small Air Shroud and the six corresponding holes (marked as j, k, l, m, n, and o) on the chassis as shown in the pictures below.
2-14 S UPER SC832/SC833 Chassis User’s Guide II. Installing the Large Air Shroud Procedures 1. Remove all the rear fans from the chassis if you have not done so. You can remove a rear fan from the chassis by pressing the release tab on the upper right corner of the fan and pulling the fan out of the chassis.
2-15 Chapter 2: Chassis Description and Installation Instructions H. Installing the Motherboard Be sue to disconnect the power supply before accessing or installing the mother- board into the chassis.
2-16 S UPER SC832/SC833 Chassis User’s Guide 3. Secure the motherboard to the chassis with Type A(6-32) screws as shown above. (*Please refer to Page 2-1 MB kit for the Type A screw.) 4. Secure the CPU heatsink mechanism to the motherboard. 2. Install standoffs to all the remaining mounting holes on the motherboard.
2-17 Chapter 2: Chassis Description and Installation Instructions Press the Locking Tab I. Installing Chassis Rails Please make sure that the chassis covers and chassis rails are installed on the chassis before you install the chassis into the rack. Procedures to Install Chassis Rails 2.
2-18 S UPER SC832/SC833 Chassis User’s Guide 3. Locate the five rail buttons on each side of the chassis and locate the five corresponding holes on each of the inner rail.
2-19 Chapter 2: Chassis Description and Installation Instructions J. Rack Installation After you have installed the inner rails on the chassis, you are ready to install the outer rails of rail assemblies to the rack. (* The rails are designed to fit in the racks with the depth of 28" to 33".
An important point after buying a device Supermicro SuperChassis 832T-R760B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Supermicro SuperChassis 832T-R760B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Supermicro SuperChassis 832T-R760B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Supermicro SuperChassis 832T-R760B you will learn all the available features of the product, as well as information on its operation. The information that you get Supermicro SuperChassis 832T-R760B will certainly help you make a decision on the purchase.
If you already are a holder of Supermicro SuperChassis 832T-R760B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Supermicro SuperChassis 832T-R760B.
However, one of the most important roles played by the user manual is to help in solving problems with Supermicro SuperChassis 832T-R760B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Supermicro SuperChassis 832T-R760B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
