Instruction/ maintenance manual of the product SuperChassis 213LT-600LPB Supermicro
Go to page of 70
SC213 Chassis Series SC213A-R900UB SC213A-R900LPB SC213A-R720UB SC213A-R720LPB USER’S MANUAL 1.0a S UPER ®.
SC213 Chassis Manual ii Manual Revision 1.0a Release Date: August 7, 2009 The informati on in this User ’s Manual has been carefu lly reviewed and is bel ieved to be accurate.
iii Preface Preface This manu al is writt en fo r prof essional system integrators and PC techni cians. It provides i nformation for the install ation and use o f the SC213 ch assis. Installati on and mainten ance should be per formed by experienc ed technicians onl y .
SC213 Chassis Manual iv Manual Organization Chapter 1 Introduction The introdu ction provides a lis t of the main compo nents included with this chassis and describes the primary features of the SC213 chassis. This chapter also includes contact information.
v Preface Append ix C This section provides detailed information on the SAS-213A backplane. Additional information can by found on our Web site, at www .
SC213 Chassis Manual vi T able of Contents Chapter 1 Introductio n 1-1 Overview ......................................................................................................... 1- 1 1-2 Shipping List ..........................................
vii Preface Installation Complete ..................................................................................... 4-1 5 4-1 1 System Fans ................................................................................................. 4-1 6 4-12 Power Supply .
SC213 Chassis Manual viii Notes.
Chapter 1 Introduction 1-1 Overview Supermicro’s SC213 chassis provides 16 hot-swappable 2.5” SAS/SA T A hard drive bays, one 5.25” hard drive, one slim DVD and one slim oppy drive in an efcient 2U form factor , designed for the most frequently encountered applications.
SC213 Chassis Manual 1-2 1-3 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
1-3 Chapter 1: Introduction 1-4 Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required be - fore a ny warranty service will be rendered. Y ou can obtain service by ca lling your vendor for a Returned Mer chandise A uthorization (RMA) number.
SC213 Chassis Manual 1-4 Notes.
2-1 Chapter 2: System Safety Chapter 2 System Safety 2-1 Overview This chapter provides a quick setup checkli st to get your chassis up and running. Following the steps in the order provided should enable you to have your chassis setup and operational within a minimal amount of time.
SC213 Chassis Manual 2-2 2-4 Electrical Safety Precautions Basic electr ical safety precaut ions should be follow ed to protect yourse lf from harm and the SC213 from damage: Be aware of the locations of the p ower on/off switch on th e cha ssis as well • as t he room’s emergency power-off switch, disconnec tion switch or electrical outlet.
2-3 Chapter 2: System Safety DVD-R OM l aser: CAUTI ON - this server may have come equipped with a • DVD-ROM d rive. T o pr event direct exposure t o the laser beam and hazardous radiation exposure, do not open the enclosure or use the unit in any uncon - ventional way .
SC213 Chassis Manual 2-4 T o uch a grounded metal obje ct bef ore re moving any boa rd fr om its antis tatic • bag. Do not let components or PCBs come into contact with your clothing, which may • retain a charge even if you are wearing a wrist strap.
3-1 Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview There are s everal LEDs on the c ontrol panel as well as o ther LEDs on t he drive carriers to k eep you constantly informed of the ove r-all status of the sys tem, as well as the activ ity an d hea lth of spec ic co mponents.
SC213 Chassis Manual 3-2 Powe r: • Ind icat es powe r is bei ng sup plie d to the sys tem's po wer sup ply uni ts. Thi s LED shou ld nor mally b e illum inated w hen the sy stem is op erati ng. HD D: • In di cat es ID E ch an ne l a cti vi ty .
3-3 Chapter 3: System Interface Power Failure: • When this LE D ashes, it indicat es a power failure in the power supply . N I C 1: • Ind icate s net work ac tiv ity o n GL AN1 whe n ashin g. NI C2: • Ind icate s net work ac tiv ity o n GL AN 2 when ashing .
SC213 Chassis Manual 3-4 3-4 Drive Carrier LEDs Y our cha ssis uses SAS or SA T A, but not both at the same time. SAS/SA T A Drives Each SAS/SA T A drive carrier has two LEDs. Green or Blue: • E ach hard dis k dr ive c ar rie r ha s ei ther a g reen or a bl ue LE D, dep endi ng u pon the har d dis k dr ives an d bac kpl ane use d.
4-1 Chapter 4: Chassis Setup and Maintenance Chapter 4 Chassis Setup and Maintenance 4-1 Overview This chapter covers the steps required to install components and perform mainte - nance on th e SC213 chassis.
SC213 Chassis Manual 4-2 4-3 Removing the Chassis Cover Removing the Chassis Cover the Chassis Cover Press both release tabs at the same time to release the cover from the locked 1. position. Once the to p cover has been r eleased, slide the cover backwa rds, toward the 2.
4-3 Chapter 4: Chassis Setup and Maintenance 7 4-4 Installing Hard Drives The SC213 comes equipped with sixtee n hot -swappable hard drives. Only SAS or enterprise SA T A HDDs are recommended for use in the SC213 chassis. Removing Hard Drive Trays from the Chassis Press the release button on the drive carrier .
SC213 Chassis Manual 4-4 Figure 4-3: Chassis Drive T ray Figure 4-4: Proper Installation of the Hard Drive into the Hard Drive Bay Installing a Hard Drive into a Drive Carrier Insert a drive into the carrier with the PCB side facing down and the connec - 1.
4-5 Chapter 4: Chassis Setup and Maintenance I/O Shield The I/O shield holds the motherboar d ports in place. Install the I/O shie ld before installing the mother board. If the mother board you purch ased did not include a standard I/ O shield, contact the motherboa rd vendor for a co mpatible shield.
SC213 Chassis Manual 4-6 Figure 4-6: Chassis Standoffs Permanent and Optional Standoffs Standoffs prevent short circuits by creating space between the motherboa rd and the chassis surface. The SC213 chass is includes perman ent standoffs in locatio ns used by most motherboards.
4-7 Chapter 4: Chassis Setup and Maintenance 4-7 Installing the Motherboard Installing the Motherboard Review the documentatio n that came with yo ur motherboard. Be come familiar 1. with component placement, requirements, precautions, and cable connec - tions.
SC213 Chassis Manual 4-8 Figure 4-8: Installing the UIO Motherboard Secure the CPU(s), heat sinks, and other co mponents to the mo therboard as 8. described in the motherboard documentation. Connect the cables between th e motherboard, back plane, chassis, fr ont 9.
4-9 Chapter 4: Chassis Setup and Maintenance 4-8 Installing the Add-on Cards Add-on card installation in the SC213 chassis differs between the UIO and low- prole chassi s models.
SC213 Chassis Manual 4-10 Figure 4-1 1: Installing the UIO Riser Card Bracket Installing Riser Cards and Add-on Cards in UIO Models Installing the Riser Card - UIO Chassis Models Remove the chassis cover . 1. Remove the riser bracket. 2. Install the riser card onto t he riser bracket.
4-1 1 Chapter 4: Chassis Setup and Maintenance Figure 4-12: UIO Add-on Card Installed Installing the Add-on Cards in UIO Chassis Models Ensure that the riser card an d riser card bracke t have been correc tly installed 1. in the chassis. Remove the blank bracket from the rear slot in the chassis.
SC213 Chassis Manual 4-12 4-9 Installing the Air Shroud Air shro uds concentrate airow to maximize fan efc iency . The SC213 ch assis air shroud does not require screws for installation. Installing the Air Shroud in the Chassis Installing the Air Shroud Lay the chassis on a at, stable surface and remove the chassis cover .
4-13 Chapter 4: Chassis Setup and Maintenance Figure 4-14: UIO Air Shroud Installation An additiona l a ir shroud is required for high-powered CPUs, to provide extra cooling.
SC213 Chassis Manual 4-14 4-10 Checking the Air Flow Checking the Server's Air Flow Make sure t here are no object s to obstruct airo w in and out of th e server . In 1. addition, i f you are using a front bezel, make sure th e bezel's lter is replaced periodically .
4-15 Chapter 4: Chassis Setup and Maintenance Installation Complete In most cases, the chassis power supp ly a nd fa ns a re p re-installed. If you need to install fans continue to the Systems Fan section of this chapter . If the chassis will be installed into a rack, continue to the next chapter for rack installation instructions.
SC213 Chassis Manual 4-16 Three heavy duty fans p rovide cooli ng for the c hassis. These fans circulate air through the chassis as a means of lowering the chassis internal temperature. The SC213 fans are hot-swappable, enabling the fans to be re placed without powering -down the system.
4-17 Chapter 4: Chassis Setup and Maintenance Figure 4-16: Placing the Low Prole System Fan Figure 4-17: Placing the UIO System Fan.
SC213 Chassis Manual 4-18 The SC213 chassis has two redundant 720 or 900 W att power supplies. The power modules are ho t-swappable, enabling the pow er supplies to b e changed without powering dow n the system. These power sup plies are auto-switch ing capable.
4-19 Chapter 4: Chassis Setup and Maintenance 4-13 Installing the Power Distributor The power distributor provides failover and power supply redundancy and is pre-install ed in the chassis. In t he rare eve nt that you have to rep lace the po wer distributor, follow the steps below .
SC213 Chassis Manual 4-20 Figure 4-20: Removing the Screws at the T op of the Backplane 4-14 Removing the Backplane The SC213 chassis backplane is loc ated beh ind the hard drives and in fron t of the front syst em fans. In ord er to change ju mper settings o n the backplane, it may be necessary to remove the backplane from the chassis.
4-21 Chapter 4: Chassis Setup and Maintenance Loosen but do not remov e the three screws in the sprin g bar , located on th e 6. oor of the chassis, indicated by the arrows below .
SC213 Chassis Manual 4-22 1 4-15 Installing the Backplane Installing the Backplane into the Chassis Ensure that all of the hard drive trays have been removed from the bays in 1. the front o f the chassis and that the spri ng bar has been lo osened as directed in the previous section.
5-1 Chapter 5: Rack Installation Chapter 5 Rack Installation 5-1 Overview This chapter provides a quick setup checkli st to get your chassis up and running. Following these steps in the order given should enable you to have the system operational within a minimal amount of time.
SC213 Chassis Manual 5-2 5-4 W arnings and Precautions Rack Precautions Ensure that t he leveling jacks on t he bottom of the rack are f ully extended to • the oor with the full weight of the rack resting on them. In single rack installations, stabilizers should be attached to the rack.
5-3 Chapter 5: Rack Installation Always keep the rack's front door and all panels and component s on the servers • closed when not servicing to maintain prop er cooling.
SC213 Chassis Manual 5-4 5-6 Rack Mounting Instructions This sectio n provides informat ion on installing th e chassis into a ra ck unit with the rails provid ed. There are a var iety of ra ck units o n the mark et, which may mean that the assemb ly proce dure wil l differ slightl y from the instruc tions pr ovided.
5-5 Chapter 5: Rack Installation Figure 5-2: Extending and Releasing the Inner Rail 1 2 1 1 1 3 1 4 Locking T abs Each inner rail has a locking tab. This tab locks the chassis into place when installed and p ushed fully into th e rack. Thes e tabs also lock the chas sis in place when fully extended from the rack.
SC213 Chassis Manual 5-6 Figure 5-4: Inner Rails Installed on the Chassis (The chassis above are an example only . Actual chassis may differ slightly) Figure 5-3: Installing the Inner Rails Installing The Inner Rails on the Chassis Installing the Inner Rails Conrm that the left and right inner rails have been correctly identied.
5-7 Chapter 5: Rack Installation Installing the Outer Rails on the Rack Installing the Outer Rails Press upwar d on the locking t ab at the rear end of the middl e rail. 1. Push the middle rail back into the outer rail. 2. Hang the hooks of the front of the outer rail onto the slots on the front of 3.
SC213 Chassis Manual 5-8 Figure 5-6: Installing into a Rack Standard Chassis Installation Installing the Chassis into a Rack Conrm that the inner rails are properly installed on the chassis. 1. Conrm that the outer rails a re correctly instal led on the rack.
5-9 Chapter 5: Rack Installation Optional Quick Installation Method The follo wing quick inst allation method may be used to install the chas sis o nto a rack. Installing the Chassis into a Rack Install the whole rail assembly onto the rack as described on page 5-7.
SC213 Chassis Manual 5-10 Notes.
A-1 Appendix A: Chassis Cables Appendix A SC213 Chassis Cables A-1 Overview This appendix list s support ed cables for your chassi s system. It only include s the most commonly used comp onents and congurations. For more compa tible cables, refer t o the manu facturer of the m otherboard you a re using a nd our Web si te at: www .
SC213 Chassis Manual A-2 A-3 Compatible Cables These cables are compatible with the SC213 Chassis. Description: This c able ha s one SF F-8484 (32 pin) connec tor on one end and 4 SAS connect ors (7 pins each) at t he other. Th is cable c onnects f rom the Ho st (motherboard or other controller) to the backplane SAS hard drive port.
A-3 Appendix A: Chassis Cables Extending Power Cables Although Supermicro chassis are designed to be efcient and cost-effective, some compatible motherboards have power connectors located in different areas. T o use these motherboards you may have to extend the power cables to the moth - erboards.
SC213 Chassis Manual A-4 Notes.
B-1 Appendix B: Power Supply Specications Appendix B SC213PowerSupplySpecications This appendix lists power supply specications for your chassis system. SC213A-R900UB, SC213A-R900LPB 900W MFR Part # PWS-902-1R with PDB Rated AC V oltage 100 - 240V 60 - 50Hz 1 1 - 4.
SC213 Chassis Manual B-2 Notes.
C-1 Appendix C: SAS-213A Backplane Specications Appendix C SAS-213A BackplaneSpecications T o avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components.
C-2 SC213 Chassis Manual C-3 A Note to Users All images and layouts shown in this user's guide are based upon the latest PCB • Revision av ailable at the time of publishing. The card yo u have received may or may not look exactly the same as the graphics shown in this manual.
C-3 Appendix C: SAS-213A Backplane Specications JumperSettingsandPinDenitions C-5 Front Connectors and Jumpers Front Connectors Y2 C6 C5 C47 C44 C201 C197 JP78 JP69 JP13 JP10 JP46 JP.
C-4 SC213 Chassis Manual C-6 Front Connector and Pin Denitions 1. Upgrade Connectors The upgrad e connectors are designated JP69, and JP78 are used for manufacturer's diagnos - tic purposes only .
C-5 Appendix C: SAS-213A Backplane Specications 1 1. - 12. ACT_IN: The activity LED connectors , designated JP26, an d JP2 7 are u se d to ind ic ate th e act ivi ty stat us o f e ach SAS drive. The activit y LE D connector is located on the front panel.
C-6 SC213 Chassis Manual 13. JP80 I 2 C Addr On C0, Off C2 (Not populated) 14. Chip Reset JP36 1-2 Reset, 2-3 No Reset (Not populated) 15. Buzzer Reset* JP18 16.
C-7 Appendix C: SAS-213A Backplane Specications I 2 C and SGPIO Modes and Jumper Settings This backplane can utilize I 2 C or SGP IO. S GPIO is the de fault mode and can be used without making changes to your jumper . The following information details which jumper must be congured to use SGPIO mode or restore your backplane to I 2 C mode.
C-8 SC213 Chassis Manual Y2 C6 C5 C47 C44 C201 C197 JP78 JP69 JP13 JP10 JP46 JP48 JP37 JP52 JP95 JP96 JP35 JP36 JP84 R132 R131 R125 R123 R392 R169 R351 R365 R124 R126 R302 R303 R624 JP18 JP80 F3 C213 .
C-9 Appendix C: SAS-213A Backplane Specications RP3 RP6 R301 R90 R89 R87 R86 R83 R468 R467 R466 R465 R464 R461 R460 R435 R428 R253 R251 R250 R215 R214 R213 R180 R179 R178 R175 R174 R173 R165 R164 R.
C-10 SC213 Chassis Manual Rear LED Indicators Rear LED Hard Drive Activity Failure LED SAS #0 D12 D5 SAS #1 D22 D23 SAS #2 D40 D37 SAS #3 D102 D107 SAS #4 D13 D6 SAS #5 D24 D29 SAS #6 D41 D38 SAS #7 D.
C-1 1 Appendix C: SAS-213A Backplane Specications Notes.
C-12 SC213 Chassis Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life sup- port systems, medical equipment, nuclear facilities or systems, airc.
An important point after buying a device Supermicro SuperChassis 213LT-600LPB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Supermicro SuperChassis 213LT-600LPB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Supermicro SuperChassis 213LT-600LPB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Supermicro SuperChassis 213LT-600LPB you will learn all the available features of the product, as well as information on its operation. The information that you get Supermicro SuperChassis 213LT-600LPB will certainly help you make a decision on the purchase.
If you already are a holder of Supermicro SuperChassis 213LT-600LPB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Supermicro SuperChassis 213LT-600LPB.
However, one of the most important roles played by the user manual is to help in solving problems with Supermicro SuperChassis 213LT-600LPB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Supermicro SuperChassis 213LT-600LPB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
