Instruction/ maintenance manual of the product SSE-X3348SR SUPER MICRO Computer
Go to page of 27
Release: 1.0c 1 / 27 Supermicro Switch Web GUI Quick Configuration Guide Switch Web GUI Quick Configuration Guide for SSE-G48-TG4 SSE-G24-TG4 SSE-X24S SSE-X24SR SSE-X3348S .
Release: 1.0c 2 / 27 Supermicro Switch Web GUI Quick Configuration Guide .
Release: 1.0c 3 / 27 Supermicro Switch Web GUI Quick Configuration Guide The information in this User’s Manual has been carefully rev iew ed and is believed to be accurate.
Release: 1.0c 4 / 27 Supermicro Switch Web GUI Quick Configuration Guide Contents 1 Introduction ................................................................................................................ . 5 2 Basic Configurations .
Release: 1.0c 5 / 27 Supermicro Switch Web GUI Quick Configuration Guide 1 Introduction This document is designe d to provide Supermicro switch users with the information required to configure the basic functionalities on the switch th rough its Web gra phical user in terface (GUI).
Release: 1.0c 6 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2 Basic Configurations 2.1 Login Page When you type the switch IP address into the bro wser, the following Login page appe ars. Fig 1: Login page Enter the User Name and Password and click on the Login butto n.
Release: 1.0c 7 / 27 Supermicro Switch Web GUI Quick Configuration Guide Middle Configuration Links Table Except for the Page Top LED Display section, the Home page is .
Release: 1.0c 8 / 27 Supermicro Switch Web GUI Quick Configuration Guide The Logout link provides a means of signing out of the manageme nt web application. It returns to the login screen requesting a user name and password for login.
Release: 1.0c 9 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.2.3 Left Side Tree The Left Side Tree display on the left side of t he page provide s qui ck acce ss to configuration pages. This tree is organized based on the featur es supported in th e swit ch.
Release: 1.0c 10 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.3 Management IP Address Note : The default management IP address fo r all Supermicro switch produ cts i s: 192.168.100.102 . Swit ch Management IP Interface SSE-G24-TG4 SSE-G48-TG4 The management IP address is configured for VLAN 1.
Release: 1.0c 11 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.3.1 Changing the Management IP Address & Gateway The management IP address and defaul t gateway can be configured in the System M gmt Management IP page .
Release: 1.0c 12 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.4 User Accounts The default administrative user name for all Super micro switch es is ADMIN and the pa ssword for all these switches is also ADMIN.
Release: 1.0c 13 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.5 Interface MTU and Jumbo Frames The interface MTU can be change d in Layer2 M gmt Port Manager Basic Settings page. The default MTU is 1500 bytes.
Release: 1.0c 14 / 27 Supermicro Switch Web GUI Quick Configuration Guide Interfaces can be given a description o r name in te xt. This helps users to identify or rememb er the interface connections with other co mpone nts on the network.
Release: 1.0c 15 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.7 Stacking The SSE-G24-TG4 and SSE-G48-TG4 switches support stacking of up to 16 switches. SBM- GEM-X2C, SBM-GEM-X2C+ sup port stacking of up to 8 swit ches.
Release: 1.0c 16 / 27 Supermicro Switch Web GUI Quick Configuration Guide Note: 1. Do not use the same switch ID for mul t iple switches on the stack. 2. All switches in the stack can only be configured through the master switch.
Release: 1.0c 17 / 27 Supermicro Switch Web GUI Quick Configuration Guide In the Upstream Interfaces field and Do wnstream Interfaces fields, list the po rts as comma separated without space chara cters.
Release: 1.0c 18 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.9 Saving Configurations Switch configurations can be save d on the System Mgmt File Management page. You can save a currently running swit ch configuration in one of thre e ways.
Release: 1.0c 19 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.10 Upgrading Firmware Switch firmware can be upgraded in the System Mgmt Firmware Upgrade page. Flash Area – The default selection is Normal to upgrade firmware i n normal flash area.
Release: 1.0c 20 / 27 Supermicro Switch Web GUI Quick Configuration Guide 2.11 Resetting to Factory Defaults Supermicro switches can be rese t to factory defaults in the System M gmt System Settings page. This page has a button that you c an press to allow a “Reset To Fa ctory Defaults”.
Release: 1.0c 21 / 27 Supermicro Switch Web GUI Quick Configuration Guide 3 VLAN Configurations The SSE-G24-TG4, SSE-G48-TG4, SBM-GEM -X2C, SBM-GEM-X2C+ and SB M-GEM-X3S+ switches support 1024 static VLANs.
Release: 1.0c 22 / 27 Supermicro Switch Web GUI Quick Configuration Guide Member Ports – Provide all the member ports of thi s VLAN including tagged and untagged member ports. Untagged Ports – These are the member po rts that need to be configured as u ntagge d ports.
Release: 1.0c 23 / 27 Supermicro Switch Web GUI Quick Configuration Guide 4 Link Aggregation (LA) Link Aggregation (LA) is a method of combinin g multiple parallel physi ca.
Release: 1.0c 24 / 27 Supermicro Switch Web GUI Quick Configuration Guide Fig 13: LA Status Page 4.2 Creating a Port Channel A port channel can be created in the Layer2 Mgmt LA Interface Setting s page.
Release: 1.0c 25 / 27 Supermicro Switch Web GUI Quick Configuration Guide Fig 14: Port Channel Page To create any port channel, enter the Port Channel ID in the page-top dialog bo x and click Add .
Release: 1.0c 26 / 27 Supermicro Switch Web GUI Quick Configuration Guide 4.3 Associating a Port Channel with Ports Once a port channel is created in the port chan nel page, it can be asso ciated with the require d physical ports.
Release: 1.0c 27 / 27 Supermicro Switch Web GUI Quick Configuration Guide 4.4 Configuring Port Channel Parameters Once a port channel is created and associate d with the required ports, y ou can config ure the port channel parameters.
An important point after buying a device SUPER MICRO Computer SSE-X3348SR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SUPER MICRO Computer SSE-X3348SR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SUPER MICRO Computer SSE-X3348SR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SUPER MICRO Computer SSE-X3348SR you will learn all the available features of the product, as well as information on its operation. The information that you get SUPER MICRO Computer SSE-X3348SR will certainly help you make a decision on the purchase.
If you already are a holder of SUPER MICRO Computer SSE-X3348SR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SUPER MICRO Computer SSE-X3348SR.
However, one of the most important roles played by the user manual is to help in solving problems with SUPER MICRO Computer SSE-X3348SR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SUPER MICRO Computer SSE-X3348SR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
