Instruction/ maintenance manual of the product HRS-SAT4C Sunfire
Go to page of 16
User's Manual High Resolution Series Satellite and Center Loudspeakers HRS-SA T4 and HRS-SA T4C HRS-SA T4 HRS-SA T4C.
User's Manual 2 Important Safety Instructions W ARNING: THIS LOUDSPEAKER IS CAP ABLE OF PRO- DUCING VERY HIGH SOUND PRESSURE LEVELS. YOU MUST T AKE EVERY PRECAUTION TO PROTECT YOUR HEARING FROM PERMANENT DAMAGE. 1. Read Instructions. 2. Keep these Instructions.
User's Manual 3 Introduction Features Location Installation Features • Perfectly matched to the HRS subwoofers to form a complete system • HRS-SA T4 can be wall-mounted, or stand on a cabinet or shelf.
User's Manual 4 Overview The HRS-SA T4 and HRS-SA T4C are high performance loudspeakers, speci - cally designed to provide high output and high performance for your home theater . Y ears of research and decades of ex- perience have gone into these amazing loudspeakers.
User's Manual 5 1. Mounting Brackets The satellite loudspeaker has one keyhole bracket that allows for wall mounting and tting onto the optional stand. The center channel loudspeaker has two keyhole brackets, and can be mounted horizontally or vertically .
User's Manual 6 The details below show various sys- tems incorporating the loudspeakers, with a subwoofer to handle the low frequency range. Ideally , all of the surround loudspeak- ers in a home theater system should be of the same make and model, and positioned at similar heights to produce a smooth and continuous soundeld.
User's Manual 7 above or below the display , as long as it is located on the centerline and not off to one side. If possible, have the center , left and right loudspeakers at the same height (within two feet). This will help give a smooth transition when sound effects move from loudspeaker to loudspeaker .
User's Manual 8 Subwoofer Location The best location for a single subwoofer can be found by following these steps: 1. Place the subwoofer on your couch or favorite easy-listening chair . 2. Y ou can then either run a calibra- tion (noise) signal through it, or play some of your favorite music samples with heavy bass.
User's Manual 9 Read the details on page 6 and 7 to help determine the best position for your loudspeaker . The loudspeaker can be wall-mounted, or simply placed on bookshelves or on top of TV cabinets. If you are not wall-mounting the loudspeaker , then we recommend that you add the supplied anti-vibration pads to the bottom surface.
User's Manual 10 9. Connect your speaker wires to the back of the loudspeaker , making sure of the correct polarity . Gently pull on the wires to make sure of a good connection. Secure the wires so their weight is not pulling against the terminals.
User's Manual 1 1 The HRS-SA T4 satellite loudspeaker has an optional stand that allows it to be installed neatly in your room. The base of the stand can be tted with four spikes, or four rubber-tipped spikes if you have hardwood oors etc.
User's Manual 12 5. Pass the large screw through the hole in the rear side of the column, and into the threaded hole in the rear of the loudspeaker . Be careful not to pinch or cut the speaker wires with the screw , or jam the wires between the loudspeaker and the top of the column.
User's Manual 13 Specications Design 2 way , High Pressure Drive Units HF: 1-inch ring radiating tweeter LF: 4.5-inch High Back-emf Frequency Response 95 Hz to 30 kHz Crossover Frequency 1.5 kHz Maximum Power 200 watts Minimum Power 25 watts Sensitivity (2.
User's Manual 14 T roubleshooting The HRS-SA T4 and HRS-SA T4C loudspeakers are designed and built to provide years of trouble-free perfor- mance. Most problems that occur can usually be solved by checking your setup, or by making sure all components are fully operational.
User's Manual 15 Limited W arranty Sunre, LLC is proud of its products that have been built with care using advanced technology and premium com- ponent parts.
High Resolution Series Satellite and Center Loudspeakers HRS-SA T4 and HRS-SA T4C HRS-SA T4 HRS-SA T4C Manual 913-150-00 Rev A.
An important point after buying a device Sunfire HRS-SAT4C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunfire HRS-SAT4C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunfire HRS-SAT4C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunfire HRS-SAT4C you will learn all the available features of the product, as well as information on its operation. The information that you get Sunfire HRS-SAT4C will certainly help you make a decision on the purchase.
If you already are a holder of Sunfire HRS-SAT4C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunfire HRS-SAT4C.
However, one of the most important roles played by the user manual is to help in solving problems with Sunfire HRS-SAT4C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunfire HRS-SAT4C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
