Instruction/ maintenance manual of the product RHT200 Suncast
Go to page of 8
Before you begin... Read instructions prior to assembly. This kit contains parts that can be damaged if incorrectly assembled. Please follow instructions. Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly. Avant ile commencer.
2. Gently spread the Left and Right Side Frames apart and insert Back Frame Left Side Frame Brace into mating holes of Left and Right Side Frames. Work Back Frame Brace Cadre lateral gauche Marco lateral firmly into the side frames until it touches the inside wall of both the Left and Right Side Frames.
5. Place Right Reel Side hub in hole in Right Side Frame. With Left Reel Side in place, keep Out-Tube horizontal, align Crossbrace Tabs on either end of Crossbrace with rectangular tab receptacles in both Reel Sides and insert. Press to snap in place.
7. Place Axle Cap on flat surface and using a hammer or small mallet, tap Axle Cap onto one end of Axle. Insert axle through hole in center of wheel, making sure the face of the wheel is facing towards the Axle Cap.
10. Insert Crank through opening in the Right Reel Side. Holding the Reel Assembly firmly in place, push on Crank until it snaps in place. 10. lnsérez Ia manivelle dans l'ouverture située au centre du flasque droit du tambour. Maintenez le dévidoir fermement en place et pressez jusqu'ã ce que Ia manivelle se fixe dun bruit sec.
12. Fold Tray portion of Handle up, align Tray Fasteners on Tray with Tray Support Holes in Handle and insert. Press to snap together. 12. Repliez le bac de rangement vers le haut et alignez les fixations du bac avec les trous de support du bac situés dans Ia poignée et intro- duisez-les.
IMPORTANT CARE INSTRUCTIONS 1) Use caution when attaching your garden hose to the hose reel out-tube, as cross-threading could cause permanent damage (See figure 1).
RHT200 Ordering Instructions Call Suncast for pricing information call 800-846-2345 or 630-879-2050. Monday - Friday 8:00 am - 4:30 pm Central Time. (Except holidays) Or see www.suncast.com Instructions pour commander Pour tout renseignement concernant nos prix, contactez Suncast au 800-846-2345 ou au 630-879-2050.
An important point after buying a device Suncast RHT200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Suncast RHT200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Suncast RHT200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Suncast RHT200 you will learn all the available features of the product, as well as information on its operation. The information that you get Suncast RHT200 will certainly help you make a decision on the purchase.
If you already are a holder of Suncast RHT200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Suncast RHT200.
However, one of the most important roles played by the user manual is to help in solving problems with Suncast RHT200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Suncast RHT200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
