Instruction/ maintenance manual of the product STC580 Sunbeam
Go to page of 20
OWNER'S MANUAL 5. 8 GHz Cordless Telephone PLEASE READ BEFORE OPER ATING THIS EQUIPMENT Model : STC580 P A G E c h g / i n u s e G H z 5 C o r d l e s s P h o n e 8 V O L I n U s e L o w B a t t .
Contents 1 Safety Instructions..................................................................................................... 2 Handset Controls....................................... .............................................................
IMPOR TANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone.
D. If the telephone does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation.
4 HANDSET Controls 1. REDIAL/ PAUSE BUTTON 3. CH (CHANNEL) BUTTON 4. MEMO BUTTON 5. HEADSET JACK 6. TEMPORARY TONE BUTTON 7. MICROPHONE 2. VOL (VOLUME) BUTTON 14. CHARGE CON TACTS 9. IN USE / BAT T . LED INDIC ATOR LOW 10. MUTE BUTTON 11. FLASH BUTTON 8.
HANDSET Controls 5 1. REDIAL/ PAUSE Button: (REDIAL) Press to REDIAL the last number you called. (PAUSE) Press to insert a PAUSE while dialing. ( You will need the PAUSE button to dial numbers which use an alternative Long Distance Access Code.
BASE UNIT Controls 6 BASE UNIT Controls 1. POWER-IN CONNECTION JACK 2. TELEPHONE LINE CONNECTION JACK 3. BASE UNIT ANTENNA 4. PAGE Button: Press to page the HANDSET . 5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp c loth.
7 Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1.
7. Install the HANDSET BATTERY PACK by plugging it into the B ATTERY CONNECTOR inside the B ATTERY COM PARMEN T. 8. Place the B ATTERY PACK inside the BATTERY COM PARTMEN T. 9. Slide the HANDSET BATTERY COM PARTMENT COVER firmly into place in its closed position.
Cordless Telephone Operation 9 Preparing for Use 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT . Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the B ATTERY PACK.
Cordless Telephone Operation 10 Receiving Calls with the HANDSET on the BASE UNIT 1. When the phone rings, lift the HAND SET . The IN USE LED indicator will light up. NOTE : The HANDSET RINGER ON/OFF switch must be in the “ ON ” position for ringer to operate.
Cordless Telephone Operation EXAMPLE : To store the number 115-1968 under the TELEPHONE KEYPAD 1 button: 1 - Press the MEMO button. 4 - Press the TELEPHONE KEY PAD 1 button. 2 - Dial 115-1968. 5 - You have stored 115-1968 under TELEPHONE KEY PA D 1 button.
Mute Function 1. While you are having a phone conversation, press the MUTE button. The microphone will be muted and the other party will not hear any voice/ talking from your end. 2. Press the MUTE button again to continue your phone coversation with the other part y.
Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and the HANDSET .
Recharging the B ATTERY PACK The nickel metal hydride (Ni-MH) B ATTERY PACK in the HANDSET can be recharged many times using the built-in charger in the BASE UNIT . When the B ATT LO W LED indicator starts to blink rapidl y , a “beep”sound will be heard every 12 seconds.
Problem Solving 15 Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following: 1. BASE UNIT is plugged into a power source. 2. HANDSET is charged. 3. TONE/PULSE Select Switch is in the right position.
Technical Information This cordless telephone uses radio frequencies to allow mobilit y . There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system.
FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is hearing aid compatible.
RINGER EQUI VALENCE NUMBER NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
FCC Requirements NOTE : This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Sunbeam STC580 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam STC580 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam STC580 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam STC580 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam STC580 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam STC580, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam STC580.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam STC580. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam STC580 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
