Instruction/ maintenance manual of the product R9851560 Barco
Go to page of 31
D320 L it e Digiti ze r Installation Guidelines R9851560 R5976471/02 15/1 1/2006.
Barco nv Events Noordlaan 5, B-8 520 Kuurn e Phone: + 32 56.36.89 .70 Fax: +32 56.36.8 8.24 E-mail: sales.ev e nts@barc o.com Visit us at the web: www.
Changes Barco provides thi s manual ’as is’ w ithout warrant y of any kind, eithe r expressed or impli ed, including but no t limited to the implie d warranties o r merchantability and fitness for a particular purp ose.
.
1. Safety 1. SAFETY 1.1 Important Safety Instructions Instructions: • Read these instructions. • Keep these inst ructions. • Heed all warnings. • Follow all instruc tions. • Do NOT submerge full y or partly in water or other liquid s. • Clean only with mater ials or chemical s that are inert, nonabrasive, noncorrosive and non-marking .
1. Safety 1.2 Important W arnings Important W arnings: • Risk of elect ric shock: Image 1-1 Risk of el ectric al shock Risk of electric sho ck. Do not open. T o reduce t he risk of elect ric shock, do n ot remove cover (or back). No user-serviceable parts inside.
1. Safety • Use of an extension cord: If an extension c ord is used with thi s product, make sure that t he total of the ampe re ratings on the products plugg ed into the exten sion cord does not exce ed the extensio n cord ampere rati ng. Also make sure that the tota l of all products pl ugged into the wall outl et does not exceed 15 amperes.
1. Safety 4 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
2. Introduction 2. INTRODUCTION 2.1 General functionality Overview The D320 Lite is a video p rocessing device, designed to d rive exclusively Barco LED walls. The D320 Lite is capable of hand ling all standa rd output formats li ke SVGA, XGA, SXGA and UXGA on an analog RGBHV and digital DVI output.
2. Introduction Ty p e Va l u e Scalability no chaining, no stacking possible Flexibility User defined input Scaler 2 input channels [ Data-Vi deo] fully in dependent scalabl e to desired output resol.
2. Introduction 2.4 Dimensions of the D320 Lite Digitizer Dimensions 4 8 6 , 2 3 3 6 , 9 3 4 6 5 , 3 2 4 4 6 , 1 2 4 8 2 , 5 2 5 3 5 2 3 1 , 8 7 1 0 5 Image 2-2 R5976471 D320 LITE DIGITIZER 15/11/2006.
2. Introduction 8 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
3. Physical Installation of the D320 Lite Digitizer 3. PHYSICAL INST ALLA TION OF THE D320 LITE DIGITIZER 3.1 Installation requirements for the D320 Lite digitizer Requirements • The D320 Lite digi tizer should n ot be placed in a built -in installat ion or enclosure unl ess proper venti- lation is pr ovided.
3. Physical Installation of the D320 Lite Digitizer 3.2 Connections Rear panel inputs/outputs A B C D E F G H I Image 3-1 A LED-WALL OUTPUT B P ower Switch C Pow er input D Not us ed E R etractable du.
3. Physical Installation of the D320 Lite Digitizer How to remove an input module from the D320 Lite Digitizer 1. Push in the release button u nderneath the inp ut module which you want to remove. At the same time pull out the i nput module by t he grip handle.
3. Physical Installation of the D320 Lite Digitizer 12 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
4. Inpu t modules 4. INPUT MODULES Overview • DVI input module • SDI input module • HDSDI input modul e • CVBS / S-VID input module • YUV / RG(s)B input module • RGB analog inp ut module • Dummy input module 4.1 DVI input module T echnical info: • Computer generat ed graphical source.
4. Input modu les 4.2 SDI input module T echnical info: • SDI data in. • SDI loop through. • 270Mbit/s tr ansmission (SMPTE 259M-C) . • 525/625 i nterlaced. • Coax (75 Ohm). • Amber LED (upper LED on the front si de) will be lit indi cating recogniti on of film, either conti nuous or intermittent film d etection.
4. Inpu t modules T echnical info: • HDSDI data in (SMPTE292M). • HDSDI loop t hrough (SMPTE292M). • Coax (75 Ohm). • When placed in an input sl ot the green LED (lower LED on the front side) will be lit in dicating that the system acknowledge s the module.
4. Input modu les 4.4 CVBS / S-VID input module T echnical info: •V i d e o ( B N C ) - CVBS : 1Vpp ±3dB ( 0,7V Video +0,3V Sync ) 75 Ohm termin ation. - BNC loop through con nector . • S-Vi deo (4 pins DIN) - Y : 1Vpp ± 3dB (0,7V V ideo +0 ,3V Sync) 75 Ohm ter mination.
4. Inpu t modules 4.5 YUV / RG(s)B input module T echnical info: • Component V ideo (BNC) - R-Y : 0,7Vpp ±3dB 75 Ohm terminati on. - Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termi nation. - B-Y : 0,7Vpp ±3dB 75 Ohm termi nation. •R G ( s ) B ( B N C ) - R : 0,7Vpp ±3dB 75 Ohm termi nation.
4. Input modu les D320 RGB-AN IN OUT Image 4-1 1 Image 4-12 Order info: Article No. Description R9850950 D320 Lit e Digitizer RGB analog SXGA i nput module R9851710 D320 Lite Digitizer RGB analog UXGA i nput module R9853120 D320 Lit e Digitizer RGB analog input mo dule 4.
5. Cables and accessories for the D320 Lite Digitizer 5. CABLES AND ACCESSORIES FOR THE D320 LITE DIGITIZER 5.1 Cables and accessories List with available cables and ac cessories Article No. Description Image R326103 Power cable with CEE7 plug. image 5-1 R3261 1 15 Power cable with NEMA 5–15 plug.
5. Cables and accessories for the D320 Lite Digitizer Image 5-4 Image 5-5 Image 5-6 Image 5-7 Image 5-8 Image 5-9 20 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
6. Configuration Schemes 6. CONFIGURA TION SCHEMES 6.1 Stand alone configuration Scheme Video Inputs RS232 Local Control PC with Control Software Video Data / Communication Data Control Data D320 TO DISPLAY COM1 LOOP IN Display 12 Input 1 Input 2 Image 6-1 A D320 Lite is su ffi cient to dri ve one Barco LED wall wi th two different sources.
6. Configuration Schemes 22 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
7. Control Software 7. CONTROL SOFTW ARE 7.1 XLite T oolset General introduction The XLite T oolset (R9850042) i s used to configur e and control t he D320 Lite Dig itizer from basi c set-up to advanced featur es such as chroma ke ying, alpha bl ending or windo w positioning.
7. Control Software 24 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
8. Maintenance of the D 320 Lite Digitizer 8. MAINTENANCE OF THE D320 LITE DIGITIZER 8.1 Cleaning the dust filter C AUTION : The fan intake grill of the D320 Lite Digit izer has a retractabl e dust filter which must be checked for good functio nality on regular basi s.
8. Maintenance of the D32 0 Lite Digitizer 26 R5976471 D320 LITE DIGITIZ ER 15/11/2006.
9. Options 9. OPTIONS 9.1 Overview Order info: Article No. Description R9851510 Climate Contro l Case for using the D320 Lite Digitizer outd oor R5976471 D320 LITE DIGITIZER 15/11/2006 27.
An important point after buying a device Barco R9851560 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco R9851560 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco R9851560 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco R9851560 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco R9851560 will certainly help you make a decision on the purchase.
If you already are a holder of Barco R9851560, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco R9851560.
However, one of the most important roles played by the user manual is to help in solving problems with Barco R9851560. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco R9851560 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
