Instruction/ maintenance manual of the product FA7200 Sunbeam
Go to page of 16
Please read these instructions carefully and retain for future reference. Instruction Booklet Sunbeam Remote Controlled T ower Fan F A7200 90cm Remote Controlled T ower Fan sun_7200.
Contents Sunbeam’ s Safety Precautions 1 Safety Precautions For Y our T ower Fan 2 Locating Y our T ower Fan 3 Features Of Y our Sunbeam T ower Fan 4 Assembling Y our T ower Fan 6 Using Y our T ower Fan 8 T roubleshooting Guide 12 Care And Cleaning 12 sun_7200.
Sunbeam’ s Safety Precautions Sunbeam are very safety conscious when designing and manufacturing consumer prod- ucts, but it is essential that the product user also exercise care when using an electrical appliance.
If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Important Instructions - Retain For Future Use Do not use outdoors.
Locating Y our T ower Fan 3 Always locate your fan on a fl at level surface. Y our tower fan should be located in a dry , cool, well ventilated location. Keep your fan away from heat sources, corrosive gases and avoid direct sunlight. Do not attempt to move your tower fan whilst it is operating.
Features Of Y our Sunbeam T ower Fan 4 Control panel The easy to read control panel allows you to quickly see what functions have been selected on your tower fan. Remote control storage When not in use, store your remote control in the handy storage compartment on the rear of the fan body .
5 Auto Off button The auto off timer allows you to set your tower fan to turn off after either 1, 2, 4 or 8 hours. Fan speed button Choose from 3 speed settings, low medium or high. Oscillation Y our tower fan oscillates 70°, distributing cool air throughout the room.
Assembling Y our T ower Fan 6 Join the two halves of the base together Feed the cord between the two halves of the base. Clip the two halves of the base together , ensuring the cord remains within the channel formed when the two halves come together .
Assembling Y our T ower Fan (continued) 7 Screw the tower to the base Use the 4 screws you put aside earlier to secure the tower to the base. Clip the power cord into the semi circular slot at the edge of the base. Ensure that the cord fi ts neatly into the channel.
Using Y our T ower Fan 8 Switching the fan on Place the fan on a fl at level surface. Insert the plug into a 230/240V power outlet and turn the power on. Press the power button . Press the fan speed button to select low , medium or high depending on your preference.
Using Y our T ower Fan (continued) 9 Using the remote control Remove the remote control from its compart- ment at the rear of the tower as shown. Point the remote towards the control panel on the front of the tower to operate. 1. 2. Changing the batteries Slide the rear cover off the remote control unit.
Using Y our T ower Fan (continued) 10 Using the auto off timer The auto off timer automatically switches the fan off after a preset number of hours. T o activate this feature, simply press the auto off button on the tower or on the remote control unit.
Using Y our T ower Fan (continued) 11 Nature mode Nature mode provides an extra level of comfort by simulating the natural rise and fall of the wind over time. Y ou can use this mode on any fan speed setting. T o use Nature mode: Choose a fan speed. Press the button on either the tower or the remote until the light illuminates.
12 Care And Cleaning Ensure that your fan is switched off and disconnected from the power outlet before cleaning. Carefully wipe your fan using a clean cloth. Do not use abrasive cleaners or brushes to clean the appliance as these may scratch the surface.
W e are so con fi dent of the quality of our product, should this appliance develop any malfunction within 2 years of purchase (3 Months commercial use) due to faulty materials or manufacture, we will replace it for you absolutely free.
Consumer Hotline is a registered T rademark of Sunbeam. In Australia V is i t www .s u n be am . co m .a u Or ca l l 1 300 88 1 86 1 In New Zealand V is i t www .s u n be am . co . n z Or ca l l 080 0 7 86 2 3 2 Ma de in C hina . Due to minor changes in design or otherwise, the product may differ from the one shown in this lea fl et.
An important point after buying a device Sunbeam FA7200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam FA7200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam FA7200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam FA7200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam FA7200 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam FA7200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam FA7200.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam FA7200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam FA7200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
