Instruction/ maintenance manual of the product HE3900 Sunbeam Bedding
Go to page of 16
Convection Plus Heaters Instruction Booklet HE3100 1200W heater with micathermic elements HE3900 2200W heater with micathermic elements Please read these instructions carefully and retain for future reference.
C o n t e n t s I m p o r t a n t i n s t r u c t i o n s – r e t a i n f o r f u t u r e u s e . Sunbeam’s Safety Precautions 1 Sunbeam’s T otal Safety System 3 Features of your HE3100 Convecti.
1 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line.
2 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. S u n b e a m ’ s S a f e t y P r e c a u t i o n s • Th is hea te r bec om es hot dur in g use .
3 Safety auto shut-off Y our Sunbeam Convection Plus Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically cuts power to the heating element, preventing overheating. Once the heater has cooled it will automatically resume normal operation.
Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly .
5 Power ON light Illuminates to indicate that the heater is switched on. Mode dial T urn the mode dial to select your desired setting: OFF , LOW (1) or HIGH (2). Thermostat indicator light The red thermostat light indicates that the heater is warming up to the selected temperature and will go out when the selected temperature has been reached.
HI C 6 F e a t u r e s o f y o u r H E 3 9 0 0 C o n v e c t i o n P l u s H e a t e r Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat.
HI C 7 Remote control The easy to use remote control enables the heater to be operated from anywhere in the room. LED screen The LED screen displays the current settings including the ambient room temperature, the selected mode, or timer setting. ON/OFF switch Illuminates to indicate that the heater is switched on.
1. Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. Note: When turned on for the first time, your new heater will emit a slight odour for up to 8 hours. This is due to the initial heating of the materials used.
9 1. Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. (Refer to Note on Page 8). 2. Ensure that the ON/OFF switch is in the OFF position. 3. Insert the plug into a 230/240V power outlet and turn the power on.
10 3. Use the plus/minus arrows to select your desired setting. The LED screen will flash the set value for 5 seconds. After 5 seconds the LED screen will display the ambient room temperature. Note: The temperature range is from 15ºC to 28ºC. If you scroll past 28ºC the display will automatically return to 15ºC.
11 Wall mounting 1. Before wall mounting your heater , remove the wheels. 2. Mark the screw location on the wall, approximately 1 metre from the floor . Note: The heater must be fixed no lower than 6.5cm above the floor and no higher than 1.8 metres above the floor .
12 Ensure that the heater is switched off and disconnected from the power outlet before cleaning. Carefully wipe the exterior of the heater with a soft damp cloth and dry thoroughly with a dry cloth. Over time, dust may accumulate on the front grille.
‘Su nb eam ’, is a reg ist er ed tr ad ema rk of Sun bea m Cor po rat io n. Mad e in Chin a. Due to mino r ch ang es in des ign or oth er wis e, the pr odu ct may di ff er fr om th e on e sho wn in th is leaf le t. Ba cke d by Sunb ea m’ s 3 Y ear Re pla ce men t Gua ra nte e an d Nat ion al Serv ic e Net wor k.
Consumer Hotline Australia 1800 025 059 New Zealand 0800 786 232 www .sunbeam.com.au is a registered T rademark of Sunbeam Corporation Limited. ABN 45 000 006 771.
An important point after buying a device Sunbeam Bedding HE3900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam Bedding HE3900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam Bedding HE3900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam Bedding HE3900 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam Bedding HE3900 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam Bedding HE3900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam Bedding HE3900.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam Bedding HE3900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam Bedding HE3900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
