Instruction/ maintenance manual of the product DC200 Sun Microsystems
Go to page of 8
DIMM Installation Guide Netra T1 AC200 and DC200 Servers.
Copyright 2000 Sun Microsystems, Inc. All rights r eserved. This product or document is pr otected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
Installing DIMMs Note – Use only dual inline memory modules (DIMMs) that are specif ically designed for the Netra™ T1 AC200 and DC200 servers. There are two DIMMs available: a 256 Mbyte DIMM (sales part number X7083A) and a 512 Mbyte DIMM (sales part number X7084).
1. Power off your system and open the system unit. Remove the top cover by following the procedure described in the Netra T1 AC200 and DC200 Server User ’ s Guide (part number 806- 5978-10). Make sure you disconnect all power cables and wear an antistatic wrist strap.
Figure 1-2 Inserting a DIMM into Slot 0 5. Insert the DIMM into the f irst vacant socket. For illustrations of the correct insertion procedur e, refer to the diagrams labeled “Memory insertion” inside the top cover of the system. If your system contains no DIMMs, use Slot 0 first (see next Note box).
Note – There ar e four DIMM slots. The one nearest to the CPU fan is slot 0. The one nearest to the power supply unit is slot 3. Put the first DIMM in slot 0, and install subsequent DIMMs in contiguous slots. The DIMMs are designed with two slots cut into the connector .
Copyright 2000 Sun Microsystems, Inc. T ous droits réservés. Ce produit ou document est protégé par un copyright et distribué avec des licences qui en restr eignent l’utilisation, la copie, la distribution, et la décompilation.
901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 fax 650 969-9131 A Sun Microsystems, Inc. Business Part Number: 806-6991-10 Revision A of October 2000.
An important point after buying a device Sun Microsystems DC200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sun Microsystems DC200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sun Microsystems DC200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sun Microsystems DC200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sun Microsystems DC200 will certainly help you make a decision on the purchase.
If you already are a holder of Sun Microsystems DC200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sun Microsystems DC200.
However, one of the most important roles played by the user manual is to help in solving problems with Sun Microsystems DC200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sun Microsystems DC200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
