Instruction/ maintenance manual of the product 45-0240 3Com
Go to page of 12
Model No. 45-0240 CAUTION: Read Rules for Safe Operation and Instructions Carefully PRINTED IN USA OWNERS MANUAL FORM NO. 46274 Assembly Operation Maintenance Repair Parts UTILITY CART.
2 LOOSE PARTS IN CARTON 8. Tailgate 9. Front Panel 10. Wheel Support 11. Axle 12. Draw Bar Tongue 13. Cart Body (2) 14. Wheels (2) FIGURE 1 - HARDWARE PACK 1. Tool Holder Brackets (2) 2. Tailgate Guides (2) 3. Corner Caps (2) 4. Latch Lock Sub-Assembly 5.
3 ASSEMBL Y INSTRUCTIONS TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver (1) Pliers (2) 7/16" Wrenches (2) 1/2" Wrenches (2) 9/16" Wrenches (1) Power Drill (See paragraph 19, Pg. 6) 1. Remove the hardware pack and all loose parts from the carton.
4 FIGURE 6 11. Assemble latch stand bracket using four 1/4" x 5/8" hex bolts, 1/4" lock washers and 1/4" hex nuts. See figure 7. TIGHTEN. FIGURE 7 1/4" x 5/8" HEX BOLT LATCH STAND BRACKET 1/4" LOCK WASHER 1/4" HEX NUT 9.
5 13. Lower the cart assembly to rest upside down on its top flanges, with wheel support up. See figure 11. FIGURE 9 LATCH LOCK SUB-ASSEMBLY 1/4" x 5/8" HEX BOLT 1/4" LOCK WASHER 1/4" HEX NUT DRAW BAR TONGUE 14.
6 19. To mount the tool holder brackets to the front of the cart it will be necessary to drill four holes in the front panel of the cart. (Recommended hole size is 9/32" diameter.) The tool bracket holders may be used to locate hole positions by placing the bracket against the front panel and marking the hole loca- tions onto the front panel.
7 GENERAL SAFETY PRECAUTIONS Preventing accidents is the responsibility of every equipment operator. The following general safety precautions must be fully understood and followed by every operator. 1. Do not at any time carry passengers in this cart.
8 REP AIR P ARTS FOR: UTILITY CART MODEL NO. 45-0240 13 18 16 18 17 3 20 22 27 A 25 24 25 25 25 24 24 24 20 14 11 7 14 8 13 12 A 21 20 20 25 24 9 21 10 25 24 32 31 1 23 4 25 24 5 24 25 27 29 28 20 1 2.
9 REPAIR PARTS LIST FOR UTILITY CART MODEL NO. 45-0240 REF. PART QTY. DESCRIPTION NO. NO. 1 23985 2 Cart Body 2 46138 2 Protective Edging Strip 3 23502 1 Tailgate 4 62458 1 Tailgate Reinforcement Brac.
10.
11.
REPAIR PARTS 303 West Raymond Sullivan, IL. 61951 217-728-8388.
An important point after buying a device 3Com 45-0240 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 45-0240 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 45-0240 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 45-0240 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 45-0240 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 45-0240, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 45-0240.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 45-0240. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 45-0240 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
