Instruction/ maintenance manual of the product C 1600-12 Studer Innotec
Go to page of 23
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E User and installer Manual Sine wave Inverter, Battery charger, Transfersystem COMPACT C 1600-12 COMPACT C 2600-24 COMPACT C 4000-48 Temperature sensor.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 2 Summary 1 G ENERAL I NFORMATION ............................................................................................................... 4 1.1 O PERATING INSTRUCTIONS .........................
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 3 4.7.3 D ELAYED MODE OF THE T RANSFER S YSTEM ..................................................................................... 17 4.8 T HE S OLAR CHAR GE CO NTROLLE R ( OPTION ) .................
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 4 1 General Information 1.1 Operating instructions This manual is a part of the delivery package of every COMPACT inverter-charger.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 5 During operation of COMPACT, high tensions are generated at the connections and inside of t he appliance which could be deadly fatal. Work on the applian ce and on the installation should only be carried out by qualified and trained personnel.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 6 2 Introduction The COMPACT is a sine wave inverter with integrated battery charger and solar charger controller with many additional functions, it has been developed to be used as stand-alone (independent of a grid-system) AC provider, or as conti nuous / break-free current supply provider.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 7 2.2.4 The solar charge controller (optional) With the built-in solar charge controller, the COMPACT is a complete solar-power-center. In a solar installation this controller ensures t hat the batteries are charged correctly.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 8 2.3.3 Parallel- Series Connection 3 Assembly 3.1 Place of assembly The location of the COMPACT must be chosen by the following criteria: Protection from unauthorized handling. Dry dust free room, no condensation.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 9 3.3.2 Protection cover for the terminals connections The protection is available as an option (Order ref. CFC-01) and avoid to do wrong hazardous connection on the terminals 230Vac. It mounted with strain relief clamps for the cable.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 10 G Aux. Contact Connecting terminal for Auxiliary Contact H AC Input Connecting terminal for AC-input.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 11 3.5.4 Connection the 230Vac Input (AC INPUT) The 230V-supply from network or from a generator must be connected to the scre w terminals AC INPUT. For this use a 3-core cable with a conductor cro ss section of 2.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 12 OFF AC OUT AC IN Ove r Te mp Over loa d ON/OFF SOLAR CHARGE Batt L ow/ High Con tact m anual AUX. CONTACT 70A 15 0V 20W OFF 0 Contact act ive Progr.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 13 4.2 Light Emitting Diodes LED Marking LED lit LED blinks 1 AC IN Voltage corresponding to self- adjusted values is at the AC IN input. Voltage, outside of the self- adjusted values is at the AC IN input.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 14 4.5 The Inverter An Inverter is built in the COMPACT, which generates a sinusoidal alternating voltage of a very high quality. With this Inverter any alternating voltage consuming device 230Vac up to the nominal power of your COMPACT can be operated.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 15 1.9 2.3 2.50 [V/cell] 2.1 A B C D 20 60 40 70 [A] A B C D t Equaliz ation Absorption Floating Chargin g current (adj usted) Chargi ng ti me Egaliz ation tim e Absorption time Floati ng 4.6 The Battery charger 4.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 16 the OUTPUT less it’s give to the charger. Priority to the OUTPUT. When the power sharing is used the LED 200% (red) is lit to point out that’s the charge is limited.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 17 The Transfer system is protected against overload wi th an automatic safety fuse on the AC Input side of the COMPACT. If the system has been overloaded the button/pin of the fuse will pop-out. To put the automatic safety system back in to operating you must push this pin back.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 18 4.9 The Multifunctional Contact In the COMPACT there is a built-in programmable power relay. The potential-free change-over contact (NO – NC) of this power relay is c onnected to the screw terminal AUX CONTACT.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 19 Caution: No external voltage should be connected to this Input Control. 4.11 The Temperature sensor Operating voltage of lead-acid batteries change depends on the temperature.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 20 5.3.2 Set the voltage and timing threshold The programming is done in accordance with the following steps: Push and hold down, the Push Button 21 (Program) and the Push Button 19 (Change status) for minimum 2 seconds simultaneously.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 21 5.4.3 Examples 5.4.3.1 Auxiliary Contac t as generator starter As per the battery capacity When in the programming of the Auxiliary Contac t, the Battery Capacity (LED 15-18) is used as a condition, then you must take note of the following requirements.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 22 5.5.1 Diagram of the different modes 9 Show an off LED Show a blinking LED Show a lighted LED CHARGE R IN VERT ER AC OUT AC IN 1 2 7 8 9 All the functions are enabled. This is the factory setting. CHARGE R IN VERT ER AC OUT AC IN 1 2 7 8 9 The inverter is disabled.
STUDER INNOTEC COMPACT User manual COMPACT V4.0 E 23 8 Technical Data Technical data Model C 1600-12 C 2600-24 C 4000-48 Inverter Nominal battery voltage 12V 24V 48V Input voltage range 9.5 - 16V 19 - 32V 38 - 64V Continuous power @ 25°C 1300VA 2300VA 3500VA Power 30 min.
An important point after buying a device Studer Innotec C 1600-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Studer Innotec C 1600-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Studer Innotec C 1600-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Studer Innotec C 1600-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Studer Innotec C 1600-12 will certainly help you make a decision on the purchase.
If you already are a holder of Studer Innotec C 1600-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Studer Innotec C 1600-12.
However, one of the most important roles played by the user manual is to help in solving problems with Studer Innotec C 1600-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Studer Innotec C 1600-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
