Instruction/ maintenance manual of the product SRT 7500 Strong
Go to page of 20
Digital High Definition Satellite Receiver SRT 7500 User Manual Picture similar.
.
.
1 PART 2 • English English T ABLE OF CONTENTS 1.0 INTRODUCTION 2 1.1 Safety Instructions 2 1.2 Storage 3 1.3 Equipment Set-up 3 1.4 F eatures & Accessories 3 2.0 YOUR RECEIVER 4 2.1 F ront Panel 4 2.2 Rear Panel 4 2.3 Remote Control Unit 4 2.4 DEFAUL T PIN-CODE: 0000 5 3.
2 PART 2 • English 1.0 INTRODUCTION 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 PART 2 • English English Apparatus - shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Where the mains plug or all-pole mains switch is used as the disconnect device, the disconnect device shall remain readily operable.
4 PART 2 • English Accessories: 1 x Remote control 2 x AAA Batteries 1 x HDMI cable 2.0 YOUR RECEIVER 2.1 F ront Panel Fig. 1 1. ST ANDBY/ON: Set receiver to Standby or ON mode. 2. MENU: Access to the Main menu 3. BACK: Viewing mode: remove appearing messages.
5 PART 2 • English English 23. FRW: No function 24. FF: No function 25. TIMERS: T o access directly to timer menu 26. LIB: No function 27. PLAY: Used for media player function 28. STOP: Used for media player function 29. PAUSE: Used for media player function; in viewing mode access to zoom menu 30.
6 PART 2 • English 4.2 C ountry Selection Select the desired country by using tu and press OK to continue. 4.3 Antenna Installation In the Antenna Installation Menu the necessary settings for the dish installation will be displayed.
7 PART 2 • English English symbol next the channel name. After you have marked all channels for locking, your changes will be saved by pressing BACK .
8 PART 2 • English positions and align your dish until signal strength and quality range are satisfying again and store this position. Now if you setup this specific SA T position correctly , you can apply realignment on the others by pressing OK at recalculate positions.
9 PART 2 • English English 5.3.2 FIRST TIME INST ALLA TION In this menu you have the possibility to do First Time Installation, which clears all stored channels in the channel list and all settings in your setup. Then a warning message will be displayed.
10 PART 2 • English 5.4 C onfiguration In this menu you can set up your personal preferences for below adjustments. Use the pq for navigation and tu buttons to change settings. F or entering values use the NUMERIC buttons. With BACK you can always cancel actions and exit the actual menu or submenu.
11 PART 2 • English English SOKOBAN: Use pq and tu to move the little girl and boxes. Press the RED button to cancel the last move. With BLUE button you can restart the game. 5.7 Media Browser Use this menu to play MP3 and JPEG files from a USB Memory device like memory stick, digital camera or multiple card reader etc.
12 PART 2 • English Press GUIDE button in viewing mode to access the EPG Menu. The screen is divided into 3 main parts: at the left side the channel list is shown, at the right the program schedule list and in the upper part a short program description with program start/end time of the current channel.
13 PART 2 • English English 6.3.2 Audio Mode and Language Press A.FORMA T button in viewing mode. F urther pressing will change audio channel between Left, Right and Stereo. Press the LANG button to select one of the available audio languages. 6.3.3 Video F ormat Press the V .
14 PART 2 • English A.2 SPECIFICA TIONS Demodulator Demodulation: QPSK, 8PSK Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s DVB-S2 8PSK/QPSK: 10~30 Ms/s FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB.
APPENDIX APPENDIX A1 APPENDIX: INST ALLA TION ASSIST ANCE.
APPENDIX A2z.
APPENDIX APPENDIX A3.
An important point after buying a device Strong SRT 7500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Strong SRT 7500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Strong SRT 7500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Strong SRT 7500 you will learn all the available features of the product, as well as information on its operation. The information that you get Strong SRT 7500 will certainly help you make a decision on the purchase.
If you already are a holder of Strong SRT 7500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Strong SRT 7500.
However, one of the most important roles played by the user manual is to help in solving problems with Strong SRT 7500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Strong SRT 7500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
