Instruction/ maintenance manual of the product SRT 7100 Strong
Go to page of 23
Digital High Definition Satellite Receiver SRT 7100 Picture similar User Manual.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 B A C SCART Fig. 5 B A C HDMI Fig. 6 B A A C 1 3 2 3 1 2 4 6 9 10 5 7 8.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 B A C SCART Fig. 5 B A C HDMI Fig. 6 B A A C 1 3 2 3 1 2 4 6 9 10 5 7 8.
1 PART 1 • English English T ABLE OF CONTENTS 1.0 INTRODUCTION 2 1.1 Safety Instructions 2 1.2 Storage 2 1.3 Equipment Set-up 3 1.4 Accessories 3 1.5 Usage of external USB devices 3 2.0 YOUR RECEIVER 3 2.1 DEFAUL T PIN-CODE: 0000 3 2.2 F ront Panel 3 2.
2 PART 1 • English 1.0 INTRODUCTION 1.1 Safety Instructions DO NOT INST ALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
3 PART 1 • English English 1.3 Equipment Set-up W e recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below: Refer to the user manual of your TV and your antenna.
4 PART 1 • English 2.3 Rear Panel Fig 2. 1. SA T IN T o connect to the LNB of your satellite dish for reception of satellite broadcast signal 2. SA T OUT T o loop through the satellite signal to a second receiver 3. IR T o connect the IR extender 4.
5 PART 1 • English English 19. GREEN/PAUSE F reezes/resumes the current broadcast 20. YELLOW/SUB Displays a list of available subtitling for the current channel 21. BLUE/TEXT Displays the teletext browser 22. 2 F reezes/resumes the playback of recordings or music files 23.
6 PART 1 • English 4.0 ST ARTING UP FOR THE FIRST TIME Ensure that your satellite signal is of good quality and that all connections are sound. In case of difficulties or questions, please ask you local dealer for assistance. It is recommended to follow the Setup Wizard step by step.
7 PART 1 • English English 4.6 Channel Setup Y our receiver will now perform an automatic channel search. Once the process is finished, all found channels will be stored and the receiver will switch to the first found channel. Y ou are now ready to enjoy your new receiver .
8 PART 1 • English The following keys are available in the Channel list and viewing mode: TV/R : T oggles between TV and radio channels SA T : changes the satellite FA V : to switch to one of the available favourite lists. 6.1.3 Using the P+/P- keys P+ or p will switch to a higher channel.
9 PART 1 • English English Booking a program from EPG Select a program as described above. Once the desired program is selected, press BLUE . This will lead you to the timer menu. All details are already filled in for you. Make a choice between Play or Record action and save the timer .
10 PART 1 • English T ransponder and tu to set the desired transponder . Signal bars indicating signal quality and strength can be found on the bottom of the screen.
11 PART 1 • English English Note: Press YELLOW in the Manual Scan menu to make settings for a PID search. Scan mode, Service type and Network search will then be replaced by settings for Video PID, Audio PID and PCR PID . F or information on PID values, please visit websites like: www .
12 PART 1 • English Once all settings are made, press EXIT to leave the Language menu. A confirmation banner will be shown. Press OK to save your settings or EXIT to discard. 7.2.2 Output Options This is the menu to configure the audio and video outputs of your receiver .
13 PART 1 • English English Auto power down Auto Power Down is a new , power saving feature that helps you with reducing power consumption. It will switch off the receiver when no command is given for at least the set time. Possible settings are: 1~6 hours with one hour steps and Disabled.
14 PART 1 • English 7.3.1 Sort and Edit Use this menu to manage channels in the channel list. Set the satellite you wish to manage channels on in the left column. Select All Sat to display the channel list with channels from all installed satellites.
15 PART 1 • English English When the File Explorer is opened, the name of your connected USB device will be shown on the right side of the window . Press OK or u to access the USB device. The content of the device will now be displayed. Only files suitable for playback on your receiver will be displayed.
16 PART 1 • English Playback of MP3 music will continue as long as the File Explorer is active. This allows you to listen to MP3 music while watching photos. Tip: The File Explorer will only show files when a correctly formatted USB device is connected to the receiver .
17 PART 1 • English English Exporting channel data T o export all channel data, enter USB Update and press BLUE . F ollow the directions on screen. This function requires a correctly formatted USB storage device to be connected to the receiver . Software upgrade The software files should be placed in the root directory of the device.
18 PART 1 • English Symptom Cause Remedy The display on front panel does not light up. The power cord is not plugged in. Ch eck th at th e p owe r c ord is pl ug ged in to th e w al l o utl et. Ma ke sur e pow er sw itc h o n r ea r p ane l i s i n O N p os iti on.
19 PART 1 • English English 9.0 SPECIFICA TIONS Demodulator Demodulation: QPSK, 8 PSK Input Symbol Rate: DVB-S QPSK:1~45 Ms/s DVB-S2 8PSK/QPSK: 10~30 Ms/s FEC Decoder: Auto ,1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode; 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode 2/3, 3/5, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode.
20 PART 1 • English Connectors SA T IN; SA T OUT TV SCART (RGB, CVBS, Audio L/R Output with volume control) HDMI (V/A-Output) T ype A V ersion 1.0 HDCP 1.1 RCA Output - Audio L/R & Video Output S/PDIF Out (Coaxial, Optical) IR Extender input USB 2.
An important point after buying a device Strong SRT 7100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Strong SRT 7100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Strong SRT 7100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Strong SRT 7100 you will learn all the available features of the product, as well as information on its operation. The information that you get Strong SRT 7100 will certainly help you make a decision on the purchase.
If you already are a holder of Strong SRT 7100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Strong SRT 7100.
However, one of the most important roles played by the user manual is to help in solving problems with Strong SRT 7100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Strong SRT 7100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
