Instruction/ maintenance manual of the product Lohas T1 StrengthMaster
Go to page of 11
LOHAS T1 Important Safety Instruction ...........1 Assembly Instruction ......................2 Console Operation..........................4 Preset Program ..............................8 Utiliztion ..........................................9 Maintenance .
FRONT TOP VIEW 20 00 mm 4 FE ET M IN RIGHT SIDE LEFT SIDE 1000mm 2 FEET MIN 1000mm 2 FEET MIN D ANGER – T o reduce the risk of electrical shock, always unplug this appliance from the electrical outlet immediately after using and before cleaning. ♦ Use this appliance only for its intended use as described in this manual.
1: Frame 2: Base frame 3: Support post (Left) 4: Support post (Right) 5: Screws 6: Nuts 7A: Power plug 7B: Power wire 8: Handlebar 9: Console 10: Screws 1 1: Bottle holder 12: Safety key 13: Support p.
L OHAS T1 ASSEMBL Y INSTR UCTION 1. Place the left upper housing (13) into position. (FIG.5) 2. Place the lower housing (14) into position ensuring that: a) That the interlocking pins (B of FIG.6) slide into position. b) And also the front plastic pin on the lower housing (A of FIG.
L OHAS T1 CONSOLE OPERA TION ST ART / ST OP : This will start the treadmill and this will stop the treadmill. There will also be an emergency stop switch. (Safety key) INCLINE up > : This will select program / level in setting mode before starting.
L OHAS T1 CONSOLE OPERA TION LOHAS T1 LOHAS T1 A udio in / out (Option) 5.
L OHAS T1 CONSOLE OPERA TION Under standby status, press the SPEED “ > ” or “ > ” (INCLINE “ > ” or “ > ” ) button to enter the program setting. Program in sequence as below : Manual run “MANUAL” → “P1” ~ “P6” → ”USER” → ”H.
L OHAS T1 CONSOLE OPERA TION (1) Press the MODE button , press the SPEED “ > ” or “ > ” (INCLINE “ > ” or “ > ” ) button to choose H and console shows “PROGRAM H” .
L OHAS T1 PRESET PR OGRAM P1 INT 1 INT 2 INT 3 INT 4 INT 5 INT 6 INT 7 INT 8 INT 9 INT 10 INT 11 INT 12 2 2 3 4 3 2 3 4 3 2 3 2 3 3 4 5 4 3 4 5 4 3 4 3 4 4 5 6 5 4 5 6 5 4 5 4 2 3 4 5 6 7 7 8 8 6 4 2 .
UTILIZA TION ♦ Always stretch your muscles before commencing the exercise program. W arm up slowly by walking at a slow speed. Increase workout intensity gradually until you reach your desired workout pace. Decrease workout intensity gradually to an easy walk.
MAINTEN ANCE General cleaning 1. Before proceeding, ensure that the treadmill power is off and that it is unplugged from the electrical outlet. 2. Remove dust, use a small vacuum nozzle to carefully vacuum around all visual components. 3. T o remove film or dirt use a slightly damp rag with a mild cleaning agent only .
An important point after buying a device StrengthMaster Lohas T1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StrengthMaster Lohas T1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StrengthMaster Lohas T1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StrengthMaster Lohas T1 you will learn all the available features of the product, as well as information on its operation. The information that you get StrengthMaster Lohas T1 will certainly help you make a decision on the purchase.
If you already are a holder of StrengthMaster Lohas T1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StrengthMaster Lohas T1.
However, one of the most important roles played by the user manual is to help in solving problems with StrengthMaster Lohas T1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StrengthMaster Lohas T1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
