Instruction/ maintenance manual of the product MS2015 StreamLight
Go to page of 32
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • Automatic Memory Storing • Slide Down Detachable Panel • Preset Equalization • Remote Co.
CONTENTS 2 Installation ...........................................3 T ake out screw befor e installation.........3 DIN Front-Mount (Method A) ................3 Installing the unit ...............................3 Removing the unit....................
3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
4 INST ALLA TION 4. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective.
5 INST ALLA TION 4. After removing the outer trim ring, pr ess OPEN/CLOSE button again to slide the front panel up. Then insert both of the supplied keys into the slots at the left and right sides of the unit, then pull the unit out of the dashboard.
6 USING THE DET ACHABLE FRONT P ANEL 2. When the panel bracket is in slide up position, insert a side of the front panel to its proper position and push the other side into the panel bracket, a ‘ click ’ sound should be heard.
WIRING CONNECTION 7 FRONT Lch SPEAKER GREEN GREEN/BLACK MEMORY BACK-UP (B+) MAIN UNIT IGNITION SWITCH (ACC+) POWER ANTENNA RED GROUND (B – ) YELLOW BLACK BLUE REAR RCA LINE OUT CABLE ANTENNA CONNECT.
8 OPERA TION LOCA TION OF KEYS 4 5 8 1. MON Button 2. LOC Button 3. MUT Button 4. LED 5. Disc slot 6. MOD Button 7. OPEN/CLOSE Button ( ) 8. Liquid Cr yst al Displa y 9. POWER ( ) 10. PUSH SEL 11. Remote Sensor (IR) 12. Reset Button 13. BND/LOU 14. Preset button 15.
9 • SWITCHING THE UNIT ON/OFF Switch on the unit by pressing any button (except OPEN/CLOSE button (7)). When system is on, press button (9) to turn off the unit. • F ACEPLA TE RELEASE Press OPEN/CLOSE button (7) to slide down the removable faceplate down.
10 OPERA TION stations are stor ed into the corresponding pr eset number button positions. - Program Scanning Press AMS button (18) shortly to scan preset stations.
11 OPERA TION • PREVIEWING ALL TRACKS Press SCN button (21) to play first several seconds of each track on the current disc. Press again to stop intr o and listen to track. • REPEA TING THE SAME TRACK Press RPT button (22) to continuously r epeat the same track.
12 OPERA TION KEY Assigned IN Searching mode (T able 1) AUDIO KNOB (ENCODER) & MANU/SKIP UP/DOWN buttons: Searching file and dir ectory during Navigation. Recordable Rewritable DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.
13 REMOTE CONTROL HANDSET FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP (0) = Display Button (_, – , +, 0) 3. SEL = Select Button (Character Shift Right) 4. VOL = V olume Up Button [Character Select (A, B ~ 8, 9, 0)] 5. VOL = V olume Down Button [Character Select (A, B ~ 8, 9, 0)] 6.
14 GENERAL P ow er Supply Requir ements : DC 12 V olts, Negative Gr ound Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output P o wer : 4 x 55 Watts Current Drain : 15 Ampere (max.
TROUBLE SHOOTING 15 Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on.
16 Error Code showing on display Cause Remedy ERROR 1 Mechanism problem Press “ RESET ” button. ERROR 2 Playback errors: Dirty disc Clean the disc and load it as instruction manual mentioned. Disc is loaded up side down Load disc with label facing up.
GUIDE D’UTILISA TION Système de radio mobile • Radio stéréo à boucle de verrouillage de phase ‘PLL ’ • Lecteur de disques compacts numériques • Programmation automatique des stations .
T ABLE DES MA TI È RES 2 Installation ...........................................3 Retirer les vis avant l’installation ...........3 Installation DIN par l’avant (méthode A) .......3 Installer l’appareil...............................3 Retirer l’appar eil.
3 Remarques : • S é lectionnez l ’ emplacement de montage de fa ç on à ce que l ’ appareil ne nuise pas aux manoeuvres du conducteur . • Avant de finaliser l ’ installation de l ’ appareil, branchez temporair ement les fils afin de v é rifier si tout est raccord é corr ectement et si le syst è me fonctionne bien.
4 INST ALLA TION 4. Montez le manchon en l ’ ins é rant dans l ’ ouverture du tableau de bor d et en repliant les languettes situ é es autour du manchon à l ’ aide du tournevis. Ce ne sont pas toutes les languettes qui pourront fair e contact, alors examinez celles qui seront les plus ef ficaces.
5 INST ALLA TION 4. Apr è s avoir retir é la garniture ext é rieure, appuyez de nouveau sur la touche OPEN/CLOSE pour glisser le panneau avant vers le haut. Ensuite, ins é r ez les deux cl é s incluses dans les fentes de gauche et de droite et sortez l ’ appareil du tableau de bord.
6 UTILISER LA F ACE AMOVIBLE 2. Lorsque le support de la face est gliss é vers le haut, ins é r ez l ’ un des c ô t é s de la face dans sa position appropri é e et appuyez le c ô t é oppos é dans le support de la face, vous entendrez un d é clic lorsqu ’ elle sera en place.
CONNEXION DES C Â BLES 7 Haut-parleur avant de gauche VERT VERT/NOIR Sauvegarde de la m é moire (B+) UNIT É PRINCIP ALE Commutateur d ’ allumage (ACC+) Antenne é lectrique ROUGE MISE À LA MASSE.
8 FONCTIONNEMENT EMPLACEMENT DES COMMANDES 4 5 8 1. T ouche ‘ MON ’ 2. T ouche de syntonisation locale ‘ LOC ’ 3. T ouche de sourdine ‘ MUT ’ 4. V oyant à DEL 5. Fente du disque 6. T ouche des modes ‘ MOD ’ 7. T ouche d ’ ouverture/fermeture OPEN/CLOSE ( ) 8.
9 • METTRE L ’ APP AREIL EN MARCHE-ARR Ê T ‘ ON/OFF ’ Mettez l ’ appareil en mar che en appuyant sur n ’ importe quelle touche ( à l ’ exception de la touche ‘ OPEN/CLOSE ’ (7). Lorsque l ’ appar eil est en marche, appuyez sur la touche (9) afin de mettre l ’ appar eil hors fonction.
10 OPERA TION cycle. Les six stations dont la r é ception est la plus forte seront entr é es en m é moir e. V ous pourrez y acc é der en appuyant sur la touche du pr é r é glage correspondant. - Balayage des stations programm é es Appuyez bri è vement sur la touche ‘ AMS ’ (18) pour balayer les stations pr é r é gl é es.
11 OPERA TION • CHOISIR LES PISTES EN UNE SEULE É T APE Pendant la lecture d ’ un CD, appuyez sur la touche (16) ou sur (17) pour vous d é placer vers la piste pr é c é dente ou suivante. Le num é ro de la piste sera af fich é à l ’é cran.
12 OPERA TION • RENSEIGNEMENTS RELA TIFS À L ’ AFFICHAGE Appuyez sur la touche ‘ DSP ’ . Si les donn é es de l ’é tiquette ID3 T AG sont offertes, elles ser ont affich é es en appuyant sur cette touche. L ’é tiquette T AG support é e est le nom de la chanson, l ’ artiste, l ’ album, l ’ ann é e et les commentaires.
13 T É L É COMMANDE TOUCHES DES FONCTIONS ET LES COMMANDES CORRESPONDANTES 1. PWR = T ouche de mise en MARCHE-ARR Ê T 2. DSP (0) = T ouche d ’ affichage 3. SEL = T ouche de s é lection (D é placement des caract è res vers la dr oite) 4. VOL = T ouche d ’ augmentation du volume (S é lection des caract è res : A, B - 8, 9, 0) 5.
14 G É N É RALES Alimentation : 12 volts CC, masse n é gative Dimensions du ch â ssis : 178 (L) ¥ 160 (P) ¥ 50 (H) Commandes de tonalit é - Graves ( à 100 Hz) : +/-10 dB - Aigus ( à 10 KHz) : +/-10 dB Puissance de sortie maximum : 4 x 55 watts Drain de courant : 15 amp è res (max.
GUIDE DE D É P ANNAGE 15 Avant de v é rifier les points ci-dessous, v é rifiez les raccor ds de vos fils. Si, apr è s v é rification de tous les points ci-dessous, le probl è me persiste encor e, consultez le marchand qui vous a vendu l ’ appar eil ou un centre de service autoris é .
88-C2175-11 16 Codes d ’ erreur apparaissant à l ’ af fichage Cause Probl è me du m é canisme Erreurs de lectur e; Le disque est sale. Le disque est char g é à l ’ envers. Le disque est é gratign é . Le disque contient des donn é es qui ne sont pas support é es par l ’ appareil.
An important point after buying a device StreamLight MS2015 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StreamLight MS2015 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StreamLight MS2015 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StreamLight MS2015 you will learn all the available features of the product, as well as information on its operation. The information that you get StreamLight MS2015 will certainly help you make a decision on the purchase.
If you already are a holder of StreamLight MS2015, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StreamLight MS2015.
However, one of the most important roles played by the user manual is to help in solving problems with StreamLight MS2015. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StreamLight MS2015 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
