Instruction/ maintenance manual of the product PRO 18 PRO 16 Stiga
Go to page of 19
STIGA PARK PRO 18 PRO 16 PRESIDENT CLASSIC 8211-021 1-06.
7. Park Classic-Pr esident 1 1. 12. Park Classi c-President 8. Park Pro16-Pro18 9. Park President 13. Park Pro16-Pro18 10. Park Pro16-Pro18 14. Park Presid ent.
16. Park Pro16-Pro18 15. Park Pro16-Pro18 20. Park Pro16- Pro18 21. Park Classi c-President 17. 22. Park Pro16- Pro18 19. Park Classic-Pr esident 23. 18.
27. Park President-Pro16- Pro18 31. Park President 28. Park Cl assic-Pres ident 32. Park Pro16-Pro18 29. Park Clas sic 33. Park Pro16-Pro18 30. Park Classic 34.
24. Park Classic 25. Park President 26. Park Pro16-Pro18.
9 1 8 2 9 6 85 1 9 5 10 4 11 3 13 7 2 11 3 13 7 12 15 14 2 11 3 13 14 18 17 19 16 20 15 12 1. Park Classic 2. Park Cl assic 3. Park President-Pro16 4. Park President-P ro16 5.
ENGLISH GB GENERAL This symbol indicates W ARNING . Per- sonal injury and/or damage to property may result if the instructions are not followed carefully . Y ou must read these instructions for use and the accompanying pamphlet "SAFETY INSTRUCTIO NS" careful- ly before starting up the machin e.
ENGLISH GB 6. DISENGA GING LEVER (President - Pro16 - Pr o18) A lever for disengaging th e variable transmission. Enables the machine to be moved by h and without the help of the engine. (Note that, on th e Pro16- Pro18, the lever is on the left-hand side.
ENGLISH GB 2. Drive position (without symbol). 3. Start position - the electric starter motor is activated when the key is turned to the spring-loaded start position. Once the en- gine has started, allow the key to return to the drive position. A spare key is enclosed in the plastic bag that also includes this "instructions for use".
ENGLISH GB 5. Grass and leaf transport Using dump cart 13-1979 (Standard) or 13-1988 (Maxi). 6. Fertiliser spreading Using fertiliser spread er 13-1987. Can also be used for spreading grass seed. 7. Sand spr eading Using sand spreader 13-1975. Can also be used for spreading salt.
ENGLISH GB lever (only US and Canada) In order to start the machine the following are nec- essary: - gear lever in neutral (only Classic) - brake pedal depressed - driver sitting on seat - power take-off engagement lever at lowest setting (i.
ENGLISH GB “FULL”). Be careful when driving on slopes. No sudden starting or stopping when mov- ing up or down a slope. Never drive across a slope. Move fr om the top and down, and from down to the top. The machine, equipped with original accessories, must not be driven on slopes greater than 10° in any dir ection.
ENGLISH GB Check the oil every time when topping up. The level should come up to the “FULL” mark. CHANGING THE TRAN SMISSION OIL (President - Pro16 - Pr o18) Change the oil the first time after 50 hours of oper- ation, and then after every 250 hours or operation or once a season.
ENGLISH GB 25 hours running (fig 17 - 18). All plastic bearings shoul d be lubricated twice each season. Apply universal grease to the steering chain a cou- ple of times each season. If the steering chain is re- ally dirty , dismantle it, wa sh it, and then grease it once more.
ENGLISH GB ADJUSTING PO WER T A KE - OFF CABLE (not Pro18) If the v-belt between the engine belt pulley and centre belt pulley slips when the power take-off is engaged, the power take-off cable can be tensioned by means of the two cable adjusters K (fig 23).
ENGLISH GB er side. 5. T ighten the pedal stop locking nut. The forward movement of the drive pedal must not be restricted by the end position of the transmission, otherwise serious damage may arise. 6. Then adjust the pedal stop under the rear part of the drive pedal.
ENGLISH GB EC - DECLA RA TION OF CONFORMITY Model: Park T ype: P401 Art. no.: 13-1258, 13-1358, 13-1458, 13-1818 , 13-1442, 13-1443, 13-1446, 13-1448 Serial no.
Pa r k Classic Pa r k President Pa r k Pro 16 Pa r k Pro 18 3400 min -1 9.3 kW 3400 min -1 9.3 kW 3400 min -1 11.8 kW 3400 min -1 13.2 kW 4.5 m/s 2 4.5 m/s 2 < 2.
MO WING AHEAD Box 1006 · SE-573 28 TRANÅS www .stiga.com.
An important point after buying a device Stiga PRO 18 PRO 16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stiga PRO 18 PRO 16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stiga PRO 18 PRO 16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stiga PRO 18 PRO 16 you will learn all the available features of the product, as well as information on its operation. The information that you get Stiga PRO 18 PRO 16 will certainly help you make a decision on the purchase.
If you already are a holder of Stiga PRO 18 PRO 16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stiga PRO 18 PRO 16.
However, one of the most important roles played by the user manual is to help in solving problems with Stiga PRO 18 PRO 16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stiga PRO 18 PRO 16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
