Instruction/ maintenance manual of the product 8211-0543-01 Stiga
Go to page of 11
STIGA PARK 4 WD 107 M 107 M HD 121 M 125 Combi Pro 8211-054 3-01 B INSTRUCTIONS FOR USE £ »HC“P”K÷»fl œOÀ‹«Œ¬¿“EÀfl ®.
125 Combi Pro 125 Combi Pro 121 M 107 M HD A B C B E F T orx T30 To r x T 3 0 G H I 125 Combi Pro 125 Combi Pro 121 M 107 M HD 10 mm 10 mm 3 5 125 Combi Pro 7 121 M 1 4 6 125 Combi Pro 8 121 M 2.
107 M A B D B 10 mm 13 mm 13 mm J K L M 11 13 107 M HD 15 9 107 12 107 M 14 16 10 107.
5 mm 107 M HD M N 24 Nm 1/3 Q 9,8 Nm P 24 Nm 24 Nm 19 21 125 Combi Pro 23 17 20 22 24 18.
ENGLISH EN 1 GENERAL This symbol indicates W ARNING . Seri- ous personal injury and/or damage to property may result if the instructions are not followed car efully . Y ou must read these instructions for use and the machine’ s safety instructions carefully .
ENGLISH EN 2.3.3 Rear mounting The cutting deck’ s rear section is secured with the pins in fig. 13. 2.3.4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks. One snap hook is intended for the working position and can be moved in the chain links to set the lift- ing force.
ENGLISH EN 3.2 Installation of 107 M HD, 121 M 1. Place the cutting deck in position in front of the machine. 2. Install the following components on both wheel axles: • W asher (3:B). • Deck mount (3:C). • W asher (3:B). • Circlip (3:A). 3. Remove the pins on both sides.
ENGLISH EN 5. Undo the screws (7:H and 12:K) so that the deck rests against the plank and the spacer . Check that the deck does not lean sideways in relation to the machine. 6. T ighten the screws (7:H and 12:K) to 22 Nm. 7. Place the deck in transport position and remove the plank.
ENGLISH EN 5.3 Service position 1. Activate the parking brake. 2. Set the implement lifter in transport position. 3. If the deck has electrical cutting height adjust- ment, disconnect the cable from the machine. See fig. 15. 4. 125 Combi Pro, 107 M HD, 107 M: Set the highest cutting height.
ENGLISH EN 6 SPARE PARTS STIGA genuine spare parts and accessories are de- signed specifically for STIGA machines. Please note that ‘non-genuine’ spare parts and accessories have not been checked or approved by STIGA: The use of such parts and accessories can affect the function and safety of the machine.
www .stiga.com GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS.
An important point after buying a device Stiga 8211-0543-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stiga 8211-0543-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stiga 8211-0543-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stiga 8211-0543-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Stiga 8211-0543-01 will certainly help you make a decision on the purchase.
If you already are a holder of Stiga 8211-0543-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stiga 8211-0543-01.
However, one of the most important roles played by the user manual is to help in solving problems with Stiga 8211-0543-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stiga 8211-0543-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
