Instruction/ maintenance manual of the product DP100 Barco
Go to page of 13
C ooling liquid r efill Installation manual For XLM, DP90 and DP100 R59770032/00 24/08/2006.
Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: sales.events@barco.com Visit us at the web: www.barco.
1. About the coo ling circuit and coo ling liquid 1. ABOUT THE COOLING CIRCUIT AND COOLING LIQUID 1.1 Overview of the Coolin g circuit Cooling c ircuit flow and p arts During operation, a closed loop of flexible tubing circulates cooling liquid to critical components, such as the engine and to the integrator rod entry .
1. About the cooling circu it and cooling liquid BLUE ANTIFREEZE DILUTED 1,2 ETHANEDIOL (1/3 ETHANEDIOL-2/3 DEMI WATER) NOT FOR HOUSEHOLD USE KEEP OUT OF REACH OF CHILDREN.
1. About the coo ling circuit and coo ling liquid - Immerse the inlet tube end without fitting as far as possible into the bottle with fresh cool ing liquid (1). - Open the fitting by pressing-in valve mechanism (2) to allow filling the immersed tubing with liquid.
1. About the cooling circu it and cooling liquid 4 R59770032 COOLING LIQU ID REFILL 24/08/2006.
2. Replacement of the co oling liquid 2. REPLACEMENT OF THE COOLING LIQUID 2.1 Insertion/Removing valved fitting How to handle Image 2-1 Insertion/Removing hose connectors Insertion T o avoid damage to the connector seal, always dep ress connector tab (1) prior to in serting (2).
2. Replacement of the cooli ng liquid The liquid cooling loop - Replacement of liquid Engine Pump Vane Outlet Inlet Expansion Vat Manometer Heat Exchanger Light Pipe entry Pressure relief valve (3 Bar.
2. Replacement of the co oling liquid 2. Push the valved fitting of the filled tube into the Inlet ’I N’ of the cooling circuit. Ensure the loose end of the tube remains immersed in the liquid.
2. Replacement of the cooli ng liquid Bottle filled with fresh cooling liquid Outlet Inlet Image 2-5 Unwanted bubbles expe lling (in practice) 3. Switch On the projector .
2. Replacement of the co oling liquid 8. Pressure cooling loop to 1 Bar , using appropriate air pump and ad apter . OK Image 2-7 Pressurizing expan sion vat R59770032 COOLING LIQU ID REFILL 24/08/2006.
2. Replacement of the cooli ng liquid 10 R59770032 COOLING LIQU ID REFILL 24/08/2006.
3. Liquid Co oling Refilling, e xpelling air 3. LIQUID COOLING REFILLING, EXPELLING AIR 3.1 Refilling, expelling air When? Minor drops in pressure over time are to be expected. Once the m inimu m pressure of 0.5 bar is reached, proceed with refilling procedure.
An important point after buying a device Barco DP100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco DP100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco DP100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco DP100 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco DP100 will certainly help you make a decision on the purchase.
If you already are a holder of Barco DP100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco DP100.
However, one of the most important roles played by the user manual is to help in solving problems with Barco DP100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco DP100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
