Instruction/ maintenance manual of the product 6500 Barco
Go to page of 14
B ARCO P ROJECT ION A NAL YZER K IT FOR G/R 6500/6400 I AND SIM6(HB) PROJECT ORS R81721 1K R820349K R821060K I NST ALLA TION M ANUAL 01122003 R5976207/ 02.
Barco nv Intelligent Displays Noordl aan 5, 852 0 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.
Copyright © All rights reserved. No part of this document may be copied, reproduced o r translated. It shal l not otherwise be recorded, transmitted or stored in a retrieval system without the prior written c onsent of BARCO.
.
Table of con tents T ABLE OF CONTENTS 1 . K i t d e s c r i p t i o n ...................................................................................................... 3 1.1 Introduction . . . ............... ................... .................
Table of con tents 2 R5976207 ANALYZER KIT FOR G/R 6500 /6400I AND SIM6(HB) PROJECTORS 0112200 3.
1. Kit descripti on 1. KIT DESCRIPTION 1.1 Introduction Analyzers in LCD projectors Depending on the type of LCD projector the analyzers used may be different. The main differences resides in the me chanical mounting system (way of mounting on the Xcube) and the material used, analyzers may be mad e of glass or saphir .
1. Kit description 1.3 Domain of application Overview The analyzers handled in this manual are used in the following projectors. Description Projector number G6500 R9001950/R9001959 R6500 R9001960/R90.
2. Access to the analy zers 2. ACCESS T O THE ANAL YZERS Overview • Removing the T op Cover • Removing the EMC plat Particularities Depending on the projector the p rocedure t o access the analyzers may be different.
2. Access to the analyze rs Image 2-2 Remove the Lens Cover Image 2-3 Pull of f the 3 rubber sealing pi eces Image 2-4 Turn out th e 3 screw s 6 R5976207 ANALYZER KIT FOR G/R 6500 /6400I AND SIM6(HB) .
2. Access to the analy zers 2.2 Removing the EMC plat How to remove the EMC pl ate ? 1. Loosen the screw B retaining the electrical conductor . (image 2-5) 2. Turn out the screws A retaining the little plate 3. Remove the little plate 4. Turn carefully the remaining screws out.
2. Access to the analyze rs 8 R5976207 ANALYZER KIT FOR G/R 6500 /6400I AND SIM6(HB) PROJECTORS 0112200 3.
3. Replacing the Analyzer 3. REPLACING THE ANAL YZER 3.1 Removing the analyzers How to remove the anal yzers ? 1. Remove the power cable (1) (image 3-1) 2. Remove the flat cables (2), disconnect by simultaneously pulling out the 2 mini locks on bot h sides of the flat cable connector .
3. Replacing the Analyzer Image 3-4 Removal of the analyzer 10 R5976207 ANALYZER KIT FOR G/R 6500 /6400I AND SIM6(HB) PROJECTORS 0112200 3.
An important point after buying a device Barco 6500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco 6500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco 6500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco 6500 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco 6500 will certainly help you make a decision on the purchase.
If you already are a holder of Barco 6500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco 6500.
However, one of the most important roles played by the user manual is to help in solving problems with Barco 6500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco 6500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
