Instruction/ maintenance manual of the product PEX1000MMSC2 StarTech.com
Go to page of 17
Manual Revision: 07/25/2014 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ..................................................................................
Instruction Manual 1 Introduction Packaging C ontents • 1x 1 Port PCI Express Gigabit F iber Net w ork Card • 1x Low P role Bracket • 1x Driver CD • 1x Instruction Manual Sy stem Requirements • PCI Express enabled computer with an av ailable PCI Express slot • Windows® 8 / 8.
Instruction Manual 2 P roduc t Overview Card Jumper Fiber Optic SC F emale Link LED Activity LED JP2 Jumper.
Instruction Manual 3 Note: See the “Card to C ard Direct Conguration ” section on the following pages for further detials on jumper conguration. JP2 Jumper Installation Hardwar e I nstalla tion W ARNING! PCI Express cards, like all comput er equipment, can be severely damaged by static electricity.
Instruction Manual 4 4. Gently insert the card into the open PCI Express slot and fasten the bracket to the rear of the case. NOTE: If installing the card int o a small form factor/low prole system, replacing the pre-installed full prole bracket with the included low prole installation bracket may be necessary.
Instruction Manual 5 4. If AutoPlay is disabled , browse to your CD/DVD drive , open the “PEX1000MMSC2_ SFP2_Driver” folder , and run the “ S etup .exe ” application within the appr opriate Operating System f older for the system you are using .
Instruction Manual 6 Mac OS 1. Insert the provided CD into your DVD/CD-ROM drive. 2. F or OS 10.7 and up, browse to the “ PEX1000MMSC2_SFP2_DriverMacOSMacOS 10.7Pack ages ” folder on the disc and then run the “ dstroot.pkg” application to start the install.
Instruction Manual 7 3. Under the Network Adapters cat egor y should be a “Realtek PCIe GBE F amily Controller” devic e. “ Right-click ” on the device and select “ Proper ties ” to make sur e it is installed and working correctly. Mac OS 1.
Instruction Manual 8.
Instruction Manual 9 Sof twar e Utilit y The PCI Express F iber Gigabit Ethernet Adapter also includes an optional monitoring and maintenance software utility .
Instruction Manual 10 1. Remove the prot ec tiv e covers from the PCI Express F iber Gigabit Ethernet Adapter’ s connector . 2. Pr epare a network cable with the corresponding “SC ” connectors for the two end devices. One end to the PCI Express F iber Gigabit Ethernet Adapter and the other to a 1000Mbps ber port on the network switch.
Instruction Manual 11 LEDs LEDs Status Indication LNK (Link) (Green) Steady A valid network connection established. O No network connection. AC T (Activity) ( Y ellow) Flashing T ransmitting or receiving data.
Instruction Manual 12 Specications Bus T ype PCI Express Card Pr ole Standard Pr ole (LP bracket incl.) Chipset ID Realtek - RTL8168E; Mar v ell - 88E1111B1 Industry Standards IEEE802.3z 1000BASE-SX, IEEE 802.1Q VLAN tagging, IEEE 802.1P Lay er 2 Priority Encoding, RFC 1157 SNMP v1, IEEE 802.
Instruction Manual 13 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
An important point after buying a device StarTech.com PEX1000MMSC2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com PEX1000MMSC2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com PEX1000MMSC2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com PEX1000MMSC2 you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com PEX1000MMSC2 will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com PEX1000MMSC2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com PEX1000MMSC2.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com PEX1000MMSC2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com PEX1000MMSC2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
