Instruction/ maintenance manual of the product PCI2S232485I StarTech.com
Go to page of 12
Manual Revision: 12/08/2011 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ..................................................................................
Instruction Manual 1 Introduction The StarT ech.com PCI to RS232/422/485 Serial Adapter Card is a univ ersal all-in- one PCI Serial adapter card that allows you t o turn a PCI or PCI-X slot into 2 serial ports capable of communicating in RS-232, RS-422, or RS-485.
Instruction Manual 2 4. Set the jumpers on the card to the desired c onguration. See “How to Use ” sec tion for jumper descriptions. 5. Insert the card into the open PCI or PCI-X slot and fasten the car d’ s bracket to the rear of the case. 6.
Instruction Manual 3 How to U se Mode Settings There are two jumpers f or each por t that are used to set its oper ation mode. JP1/JP2 for P or t 1 (S1) and JP4/JP5 for P or t 2 (S2).
Instruction Manual 4 JP2 (for S1 port) / JP5 (for S2 port) JP1 (for S1 port) / JP4 (for S2 port) Description RS232 T ransmission Echo This jumper determines if transmission data will be echoed back. The Echo mode is useful to detect if the RS485 bus has data collision.
Instruction Manual 5 T ermination Resistor This jumper enables/disables the 120 Ohm termination resistor between D A T A+ and DA T A- of the RS485 transceiver: JP2 (for S1 port)/JP5 (for S2 port) Desc.
Instruction Manual 6 P inout Diagram RS232 RS422(4-wire)/485 (4-wire/2-wir e) 1 5 6 9.
Instruction Manual 7 Specications Bus Interface PCI revision 2.2 (3.3/5V slot connector) Form F actor F ull Prole Chipset ID Oxford O XuPCI952 Connectors 2 x DB9 male Supported Protocols RS232/422/485 Maximum Data T ransfer Rate 921.
Instruction Manual 8 T echnical Suppor t StarT ech.com’ s lifetime technical suppor t is an integral part of our commitmen t to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensiv e selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connectivit y par t you need. From the latest technology t o legac y pr oduc ts — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions.
An important point after buying a device StarTech.com PCI2S232485I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com PCI2S232485I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com PCI2S232485I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com PCI2S232485I you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com PCI2S232485I will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com PCI2S232485I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com PCI2S232485I.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com PCI2S232485I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com PCI2S232485I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
