Instruction/ maintenance manual of the product NETRS232 StarTech.com
Go to page of 8
Rev . C02 NETRS232 One/T wo/F our P or t Quick Installation Guide.
Congratulations on y our purchase of a StarT ech NETRS232. NETRS232s connect serial devices to Ethernet networks . Any serial device—POS equipment , factor y machinery , monitoring hardware , or security devices, f or example—can send its information to the NETRS232.
2 Hardwar e Setup 1. Connect the power supply to the NETRS232 and t o AC pow er . 2. The power (r ed) LED will light to indicate that the unit is receiving po wer .
3 Software installation and configuration consists of the following: A. Running the NETRS232 setup software C. Activating and deactivating NETRS232 ports D . Optional advanced port configuration E. Upgrading software B. C onfiguring network settings Soft ware Installa tion and C onfigura tion A.
4 Configuring NETRS232 network settings using the Configuring NETRS232 network settings using a web browser IP-Extender Manager T o set a NETRS232's network settings using the , right-click on it in the IP-Extender tree and select “Properties” .
5 Choose the setting you wish to change. In the configuration screen that appears , enter the network settings you wish f or that NETRS232 device. Once the new values are enter ed and accepted , the NETRS232 will reboot to implement the new network settings.
6 particular NETRS232 device, right click on that device in the left panel of the and select “Remov e All” . Activating and deactivating NETRS232 ports on one computer does not affect the operation of those ports on other systems. NETRS232 ports that have been activated on your PC can generally be used immediately without further configuration.
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device ma y not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that may cause undesired operation.
An important point after buying a device StarTech.com NETRS232 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com NETRS232 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com NETRS232 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com NETRS232 you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com NETRS232 will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com NETRS232, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com NETRS232.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com NETRS232. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com NETRS232 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
