Instruction/ maintenance manual of the product BUTTERFLY TRIKE 72639 Barbie
Go to page of 8
Butterfly Trike Model Number: 72639 Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. ©1999 Mattel, Inc. All Rights Reserved. Printed in Mexico ® and ™ designate U.S. trademarks of Mattel, Inc. 72639A-0921 BARBIE is a U. S. trademark of Mattel, Inc.
• Place a cap nut on a scrap block of wood. • Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a hubcap (peg side up) onto the straight axle.
• Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover. Pedal Hub Pedal Hub Pedal Axle Metal Tab Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
5 Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel.
6 • Turn the frame upright. • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar over the fork post and push it down onto the frame.
7 Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils.
8 • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the trike, use a mild soap and water solution and a clean cloth.
An important point after buying a device Barbie BUTTERFLY TRIKE 72639 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barbie BUTTERFLY TRIKE 72639 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barbie BUTTERFLY TRIKE 72639 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barbie BUTTERFLY TRIKE 72639 you will learn all the available features of the product, as well as information on its operation. The information that you get Barbie BUTTERFLY TRIKE 72639 will certainly help you make a decision on the purchase.
If you already are a holder of Barbie BUTTERFLY TRIKE 72639, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barbie BUTTERFLY TRIKE 72639.
However, one of the most important roles played by the user manual is to help in solving problems with Barbie BUTTERFLY TRIKE 72639. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barbie BUTTERFLY TRIKE 72639 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
