Instruction/ maintenance manual of the product NXT 7000 Star Trac
Go to page of 9
Spinner® Bike Installation Instructions NXT 7000 ELITE 6900 PRO 6800.
Page 1 of 9 Star T rac Product Support 800 - 503 - 1221 Page 1 of 9 Installation Instructions AS SETUP SPIN BIKE ASSEMBLY AND SETUP Use the following procedures to unpack and assemble your STAR TRAC SPINNER ® BIKE . Prepare the are a that you will be unpacking and assembling the bike to be free from debris that may cause damage.
Page 2 of 9 Star T rac Product Support 800 - 503 - 1221 Page 2 of 9 Assembly Following these steps in order will minimize the build time and ensure proper assembly. Note : Not all of the following procedures are performed on all models; Spinner ® Pro, Elite and NXT.
Page 3 of 9 Star T rac Product Support 800 - 503 - 1221 Page 3 of 9 NXT Only 1. Position the leg so the thicker end faces toward the front of the bike 2.
Page 4 of 9 Star T rac Product Support 800 - 503 - 1221 Page 4 of 9 Installation of the Saddle and Seat Slider 1. Install the seat post into the frame and lower it to the lowest position and tighten the pop pin securely. 2. Slide the seat slide into the top of the seat post with the saddle pointed towards the front of the bike.
Page 5 of 9 Star T rac Product Support 800 - 503 - 1221 Page 5 of 9 Installation of the Handlebar Pop Pin 1) Insert the pop pin into the front of the bike frame. 2) Hand - tighten the nut of the pop pin hand tight taking care not to cross tread it. 3) Using a wrench tighten the pop pin assembly.
Page 6 of 9 Star T rac Product Support 800 - 503 - 1221 Page 6 of 9 Pro & Elite Only 1) Slide the handlebar post into the frame making sure the holes face the front of the bik e. 2) Allow the post to go into the frame all the way in to level 1 and align the pop pin so it snaps into the hole then tighten the pop pin and test for steadiness.
Page 7 of 9 Star T rac Product Support 800 - 503 - 1221 Page 7 of 9 Removing the decal protective covers The bikes have protective clear decal covers to protect the decals from damage during packaging and shipping. Using your fingers only, carefully peel off the protective covers after assembl y of the bike.
Page 8 of 9 Star T rac Product Support 800 - 503 - 1221 Page 8 of 9 WEB SITE http://support.startrac.com/ PHONE 800 - 503 - 1221 FAX 714 - 669 - 0739 EMAIL SUPPORT@STARTRAC.COM Copyright ©, Star Trac 14410 Myford Road Irvine, CA 92606 New Spinner Bike Install Rev A PN 620 - 7493.
An important point after buying a device Star Trac NXT 7000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Trac NXT 7000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Trac NXT 7000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Trac NXT 7000 you will learn all the available features of the product, as well as information on its operation. The information that you get Star Trac NXT 7000 will certainly help you make a decision on the purchase.
If you already are a holder of Star Trac NXT 7000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Trac NXT 7000.
However, one of the most important roles played by the user manual is to help in solving problems with Star Trac NXT 7000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Trac NXT 7000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
