Star Micronics TCP400 Series Network Card manual

Summary of contents each page of manual

Page 1

THERMAL RE-WRIT ABLE CARD READER /WRITER TCP400 SERIES User ’ s Manual Manuel d ’utilisation Benutzerhandbuch Manuale dell ’utente Manual del usuario.
Page 2

Federal Communications Commission Radio Frequency Interfer ence Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pur- suant to Part 15 of the FCC Rules.
Page 3

T ABLE OF CONTENTS 1. Precautions for Safe Use ............................................................ 1 2. Unpacking .................................................................................. 3 3. External Appearance and Part Names .....
Page 4

– 1 – 1. Precautions for Safe Use Carefully read and obey the following items to prevent injury to yourself or to others and to prevent damaging property . 1-1 . Precautions for Reader/Writer Setup 1. Setup the reader/writer in a solid, and level location.
Page 5

– 2 – 8. Do not obstruct the insertion or discharge path of the cards. 9. Do not cut the power while a card is being processed. 10. In case of reader/writer error (abnormal sounds, abnormal odors, smoke, re) turn off the reader/writer immediately and unplug it from the power outlet.
Page 6

– 3 – 3. External Appearance and Part Names 1. Power Switch ............................ This turns the power to the reader/writer on and off. 2. Power Lamp ............................. Indicates that reader/writer power is on. 3. Status Lamp ...
Page 7

– 4 – 4. Connecting to External Devices Connect either the RS-232C interface Cable or USB interface Cable to the reader/writer . 4-1 Mounting the RS-232C Interface Cable 1. Cut the power to the host computer and the reader/writer . 2. Connect one end of the interface cable to the reader/writer and the other end to the host computer .
Page 8

– 5 – 5. Connecting the Power Cord 1. T urn the power switch off. 2. Connect the powr cord to the AC inlet on the backside of the reader/writer . 3.
Page 9

– 6 – 7. Cleaning Cards A cleaning card is used to clean the transport rollers inside the unit. T wo cleaning cards accompany each unit. They are in the plastic wrap.
Page 10

– 7 – Cl ea nin g S wi tc h 7-2 Frequency of Use 1. Everyday , or once every 300 prints. 2. If errors occur repeatedly , or if there are printing problems, clean the reader/writer . 3. Thecleaning LED willash when therehave been 300printings.
Page 11

– 8 – 8. T roubleshooting 8-1. T rouble when T urning on the Power Symptom Possible Cause What to Do The power lamp Won’t accept The power cord is not Correct connect the power does not light. cards. correctly connected. cord. Bro ken wire in powe r co rd.
Page 12

– 9 – 8-3. Removing Jammed Cards 1. T urn off the power and unplug the reader/writer . 2. Press the cover opener . 3. Lift the upper cover while the cover is open. 4. Whilepullingthemechanism’ssnaplever(green),liftthemechanism.
Page 13

T ABLEDESMA TIERES 1. Précautions pour une utilisation en toute sécurité .................... 1 1 2. Déballage ................................................................................. 13 3. Aspect extérieur et noms des éléments .
Page 14

– 1 1 – 1. Précautions pour une utilisation en toute sécurité  Lisez attentivement les points suivants et respectez-les an d’éviter tout dommage, corporel ou matériel. 1-1. Précautions relatives à l’installation du lecteur/graveur 1.
Page 15

– 12 – 7. N’insérezaucunautreobjetquelescartesappropriéesdanslelecteur/graveur . 8. N’obstruezpaslafented’insertionoudelibérationdescartes. 9. Necoupezpasl’alimentationlorsqu’unecarteestencoursdetraitement.
Page 16

– 13 – 3. Aspect extérieur et noms des éléme nts 1. Commutateurd’alimentation Il perm et de mett re le lec teur/ grave ur sou s/hor s tension. 2. Témoinalternatif Indiquequelelecteur/graveurestsoustension.
Page 17

– 14 – 4. Connexion à des périphériques externes Connectezlecâbled’interfaceRS-232Coulecâbled’interfaceUSBaulecteur/graveur . 4-1 Installation du câble d’interface RS-232C 1. Coupezl’alimentationdel’ordinateurhôteetdulecteur/graveur .
Page 18

– 15 – 5. Connexion du câble d’alimentation 1. Mettezl’appareilhorstension. 2. Connectezlecâbled’alimentationàl’entréesecteursituéeàl’arrièredulecteur/gra - veur .
Page 19

– 16 – 7. Cartes de nettoyage Une carte de nettoyage permet de nettoyer les rouleaux de transport à l’intérieur de l’ unité. Chaque unité dispose de deux cartes de nettoyage. Elles se présentent sous em- ballage plastique.
Page 20

– 17 – Commutateur de nettoyage 7-2 Fréquence d’utilisation 1. Quotidienne ou toutes les 300 impressions. 2. Si des erreurs ou des problèmes d’impression surviennent de manière récurrente, nettoyezlelecteur/graveur .
Page 21

– 18 – 8. Dépannage 8-1. Problème lors de la mise sous tension Symptôme Cause possible Action Le témoin N’acceptera LeCâbled’alimentationn’est Corrigez la connexion d’alimentationne paslescartes. pas connecté correctement.
Page 22

– 19 – 8-3. Retrait des cartes coincées 1. Mettezlelecteur/graveurhorstensionetdébranchez-le. 2. Appuyezsurlemécanismed’ouvertureducapot. 3. Soulevezlecapotsupérieurunefoisouvert.
Page 23

INHAL T 1. Sicherheitsvorkehrungen .......................................................... 21 2. Auspacken ................................................................................ 23 3. ÄußereMerkmaleundBezeichnungenderT eil .
Page 24

– 21 – 1. Sicherheitsvorkehrungen  Lesen Sie die folgenden Anweisungen sorgfältig durch, um V erletzungen an sich selbstundanderenPersonensowieSachschädenzuvermeiden. 1-1. Sicherheitsvorkehrungen für die Installation des Lese-Schreib- Geräts 1.
Page 25

– 22 – 6. SteckenSiedieKartennurinderangegebenenRichtungindasGerätein. 7. SteckenSieniemalsandereGegenständealsgeeigneteKartenindasGerätein. 8. BehindernSienichtdenEinführungs-oder AusgabewegderKarten.
Page 26

– 23 – 3. Äußere Merkmale und Bezeichnungen der T eil 1. Netzschalter ..................................Hiermit schalten Sie den Netzstrom ein und aus. 2. Netzkontrollleuchte ....................... Z eigt an, dass das Lese-Schreib-Gerät einge - schaltet ist.
Page 27

– 24 – 4. Anschluss externer Geräte V erbinden SieentwederdasRS-232C-Schnittstellenkabel oderdasUSB-Schnittstellen - kabelmitdemLese-Schreib-Gerät. 4-1 Anschließen des RS-232C-Schnittstellenkabels 1.  T rennen  Sie die Stromversorgung des Host-Computers und des  Lese-Schreib- Geräts.
Page 28

– 25 – 5. Anschließen des Netzkabels 1. BringenSiedenNetzschalterindie„Aus“-Position. 2. V erbinden SiedasNetzkabel mitder Anschlussbuchseaufder RückseitedesLese- Schreib-Geräts. 3. SteckenSiedenNetzsteckerineinekorrektgeerdeteWechselstrom-Steckdose.
Page 29

– 26 – 7. Reinigungskarten Reinigungskarten dienen zum Reinigen der Transportwalzen  im Gerät. Zwei Reini - gungskartenliegenjedemGerätbei.SiesindineinerKunststoffhülleverpackt. 7-1 Außenansicht 6.
Page 30

– 27 – Reinigungstaste 7-2 Häugkeit der Benutzung 1. Täglichodernachjeweils300Druckvorgängen. 2.  Reinigen Sie das Lese-Schreib-Gerät, wenn häufig Fehler auftreten oder wenn Druckproblemevorliegen.
Page 31

– 28 – 8. Fehlerbehebung 8-1. Probleme beim Einschalten Symptom Mögliche Ursache Korrekturmaßnahme Netzkontrollleuchte KartenwerdenNetzkabelistnicht Netzkabelrichtig leuchtetnicht. nicht richtigeingesteckt. einstecken.
Page 32

– 29 – 8-3. Entfernen von verklemmten Karten 1. SchaltenSiedasGerätausundziehenSiedenNetzstecker . 2. DrückenSiedie Abdeckungsöffnertaste.
Page 33

SOMMARIO 1. Precauzioniperl’utilizzosicuro ................................................ 31 2. Apertura della confezione ......................................................... 33 3. Aspetto esterno e nomi dei componenti ...........
Page 34

– 31 – 1. Precauzioni per l’utilizzo sicuro  Leggere attentamente e seguire le indicazioni fornite di seguito per evitare danni alle persone o alle cose. 1-1. Precauzioni per l’installazione del dispositivo di lettura/scrittura 1.
Page 35

– 32 – 9. Noninterromperel’alimentazionedurantel’elaborazionedelleschede. 10. In caso di anomalia del dispositivo di lettura/scrittura (rumori, odori anomali, fumo, fuoco)spegneresubitoildispositivoescollegarlodallapresadialimentazione.
Page 36

– 33 – 3. Aspetto esterno e nomi dei componenti 1. Interruttoredialimentazione Consente di accendere e spegnere il dispositivo dilettura/scrittura. 2. Spiadialimentazione Indicacheildispositivoèacceso.
Page 37

– 34 – 4. Connessione a dispositivi esterni CollegareilcavodiinterfacciaRS-232CoUSBaldispositivodilettura/scrittura. 4-1 Montaggio del cavo di interfaccia RS-232C 1. Disattivarel’alimentazionedelcomputerhostedeldispositivodilettura/scrittura.
Page 38

– 35 – 5. Collegamento del cavo di alimentazione 1. Posizionarel’interruttoredialimentazionesuOff. 2. Collegare ilcavo di alimentazione all’ingresso CA  nel retro del dispositivo dilettura/ scrittura.
Page 39

– 36 – 7. Schede per pulizia La scheda per pulizia viene utilizzata per pulire i rulli di trasporto all’interno dell’unità. Ciascunaunitàèdotatadidueschedeperpuliziaavvolteinunrivestimentodiplastica.
Page 40

– 37 – Interruttore di pulizia 7-2 Frequenza di utilizzo 1. T uttiigiorniounavoltaogni300stampe. 2. Se si vericano spesso errori, oppure problemi di stampa, pulire il dispositivo di let - tura/scrittura.
Page 41

– 38 – 8. Risoluzione dei problemi 8-1. Problemi all’accensione Sintomo Causa possibile Soluzione La spia di Nonvengono  Ilcavodialimentazionenon Collegareilcavodi alimentazione non accettate è collegato correttamente.
Page 42

– 39 – 8-3. Rimozione delle schede inceppate 1. Spegnereildispositivodilettura/scritturaescollegareilcavodialimentazione. 2. Premereildispositivodiaperturacoperchio. 3. T enere aperto il coperchio superiore.
Page 43

CONTENIDO 1. Precauciones de uso ................................................................41 2. Desembalaje ............................................................................ 43 3. Aspecto exterior y nombres de las piezas .........
Page 44

– 41 – 1. Precauciones de uso  Lea atentamente y cumpla las siguientes recomendaciones. Evitará posibles lesio - nesaotraspersonasoaustedmismo,asícomodañosamateriales. 1-1. Precauciones para la instalación de la impresora/lectora 1.
Page 45

– 42 – jetasadecuadas. 8. Noobstruyaelconductodeentradanidesalidadelastarjetas. 9. Nocorteelsuministroeléctricosihayunatarjetaenproceso. 10. Encasode error(sonidosu oloresanormales,humo,fuego, etc.
Page 46

– 43 – 3. Aspecto exterior y nombres de las piezas 1. Interruptorgeneral Sirve para encender y apagar la impresora/lecto - ra.
Page 47

– 44 – 4. Conexión a un dispositivo externo Conecte el cable de interconexión RS-232C o el cable de interconexión USB a la im - presora/lectora. 4-1 Colocación del cable de interconexión RS-232C 1. Desconecteelordenadorylaimpresora/lectoradelacorriente.
Page 48

– 45 – 5. Conexión del cable de alimentación 1. Apague el interruptor general. 2. Conecte el cable de alimentación a la entrada de corriente alterna ubicada en la parteposteriordelaimpresora/lectora. 3. Enchufe el cable de alimentación a una toma de corriente conectada a tierra co - rrectamente.
Page 49

– 46 – 7. T arjetas limpiadoras Las tarjetas limpiadoras se utilizan para limpiar los rodillos transportadores que se en - cuentran en el interior de la unidad. Cada unidad viene acompañada de dos tarjetas limpiadoras.
Page 50

– 47 – Interruptor de limpieza 7-2 Frecuencia de uso 1. T odoslosdíasocada300impresiones. 2. Limpie la impresora/lectora si se producen errores repetidamente o si surgen pro - blemas de impresión.
Page 51

– 48 – 8. Solución de problemas 8-1. Problemas al encender el aparato Síntoma Posible causa Qué hacer No se enciende la No se El cable de alimentación Conecte correctamente luz de encendido. aceptan está mal conectado. el cable de alimentación.
Page 52

– 49 – 8-3. Cómo retirar tarjetas atascadas 1. Apaguelaimpresora/lectoraydesconécteladelatomadecorriente. 2. Pulse la palanca de apertura de la tapa. 3. Conlatapasuperiorabierta,levantelatapasuperior .
Page 53

– 50 – < Settings for Communication Speed > T o change the serial communication settings, change the following DIP switch settings. (Ex-factoryDefaultSettings:DSW1to6areON,7and8areOFF .
Page 54

– 51 – DI P- Sw it ch T o change the DIP switch settings, do the following. 1. Check that the power is turned off for both the reader/writer and the host computer . 2. Remove the two screws. 3. Pull out the interface card to remove it. 4. Change the DIP switch settings on the interface card.
Page 55

– 52 – Appendix B: Removing / Installing Interface Board B-1. Removing 1. T urn off the power switch. Then, unplug the power cord from the outlet. 2. Removethetwoscrewsasshowninthegurebelow . 3. Pull the interface board in the direction of the arrow to remove it.
Page 56

– 53 – Appendix C: Optional Ethernet Interface IFBD-HE05 <InitializingSettings> T o initialize the setting information, set the push switch as described below . Push the switch for 1 to 5 seconds while the unit is operating in the normal mode.
Page 57

– 54 – Appendix D: General Specications Item Specications   CardSpecication Plasticcard(JISX6301/ISO7810:typeID-1) Card T ransport Unit T rans.
Page 58

– 54 –.
Page 59

– 54 –.
Page 60

– 55 – OVERSEAS SUBSIDIAR Y COMP ANIES ST AR MICRONICS AMERICA, INC. 1 150KingGeorgesPostRoad,Edison, NJ08837-3729U.S.A. T el:732-623-5555,Fax:732-623-5590 http://www .starmicronics.com ST AR MICRONICS EUROPE L TD.

Read the Star Micronics TCP400 Series manual - avoid problems

An important point after buying a device Star Micronics TCP400 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Star Micronics TCP400 Series
to know what to do in case of failure Star Micronics TCP400 Series

If you have not bought Star Micronics TCP400 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics TCP400 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics TCP400 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics TCP400 Series will certainly help you make a decision on the purchase.

If you already are a holder of Star Micronics TCP400 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics TCP400 Series.

However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics TCP400 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics TCP400 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Star Micronics TCP400 Series manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Read the Star Micronics TCP400 Series manual - avoid problems

Other manuals from the category Network Card

Dell 5600+

HP (Hewlett-Packard) 100B-TX

HP (Hewlett-Packard) 100TX NightDIRECTOR/100

HP (Hewlett-Packard) 10BT NightDIRECTOR/100

HP (Hewlett-Packard) 1100d

HP (Hewlett-Packard) 1100dtn

HP (Hewlett-Packard) 1761-NET-ENI

HP (Hewlett-Packard) 180 Degree Turn

HP (Hewlett-Packard) 2240

HP (Hewlett-Packard) 232664-006