Instruction/ maintenance manual of the product TCP100 Series Star Micronics
Go to page of 13
THERMAL REWRITE CARD READER / WRITER TCP100/2000 series Installation Guide & Specifications Thank you for choosing the TCP100/2000 Thermal rewrite card system. This “Installation Guide & Specifications” includes very important instructions for safety .
C • O • N • T • E • N • T • S 1. HANDLING NOTES --------------------------------------------------------- 1 2. OUTLINE ---------------------------------------------------------------------- 4 3. UNP ACKING ------------------------------------------------------------------ 5 4.
1 HANDLING NOTES At the installation: 1) Install the TCP100/2000 reader/writer on a flat surface. Minimize any shock or vibration to the reader/writer , as shock or vibration may cause injury and/or failure. 2) Keep the TCP100/2000 reader/writer away from hands of the children.
2 During the operation: 1) Do not use any other card but specified by Star Micronics Co., Ltd. It may cause malfunction, failure, etc. 2) Do not use wet or oily stained card. Do not touch card with wet or stained hand. It may cause malfunction, failure, etc.
3 10) When the unusual (such as noise, stench, smoke, fire, etc.) is found, turn off the power immediately . Then disconnect the plug. If the TCP100/ 2000 reader/writer being kept using, it may cause failure, skin burn, etc. Contact our sales/tech support team for repair .
4 OUTLINE The TCP100/2000 series is a reading/writing device for specified IC card or reading device for ISO magnetic stripe type card. It also has print/erase capability to human readable area on the surface of the card. This series is compatible with most host computers and various P .
5 2 5 4 3 1 UNP ACKING After unpacking the unit, check that all the accessories are included in the individual box. Housed unit (TCP100/2000 series) 1 TCP100/2000 unit 2 Power cable 3 Cleaning cards (.
6 0 6 1 5 4 8 3 7 2 0 A 8 7 9 APPEARANCE AND NOMENCLA TURE Housed unit TCP100/2000 series [TCP100] [TCP2000 back] 1 Switch Cover This cover protects the power switch of the system. Push to open and close. 2 Power Switch This switch turns the power of the system ON/OFF .
7 CONNECTION TO EXTERNAL UNITS AND SETTING (Housed unit TCP100/2000 series) <Connecting the interface cable> 1 T urn OFF the power of the host computer and the reader/writer . 2 Plug in an end of the interface cable to the reader/writer connector and the other end to the serial port of the host computer .
8 Cleaning switch Front cover CLEANING 6-1 Using the cleaning card T wo cleaning car ds and one bottle of cleaning liquid for cleaning the mag- netic head, rollers, etc. are supplied in the enclosed plastic bag. (1) Dimensions of cleaning card (2) Frequency of cleaning 1.
9 TROUBLE SHOOTING Difficulties when the power is turned ON. Symptom Possible cause Remedy Power LED lamp does notlight up. Power LED lamp light up. Card is not accepted Card is accepted Card is not accepted Card is accepted, but main unit does no t properly run.
10 TCP100 TCP2000 Card type PVC (thick card) PET (thin card) Card feeding part Driving method Feed roller Card inserting Face up in one direction direction Card feed speed 350mm/s (high speed) 350mm/s.
Special Products Operating Div . Card System Sales Section 536 Nanatsushinya, Shimizu, 424-0066, Japan T el: 81-543-47-0122 , Fax: 81-543-48-5013 http://www .
An important point after buying a device Star Micronics TCP100 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Micronics TCP100 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics TCP100 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics TCP100 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics TCP100 Series will certainly help you make a decision on the purchase.
If you already are a holder of Star Micronics TCP100 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics TCP100 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics TCP100 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics TCP100 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
